Toa YW-4500 Q Manual de Usario
Toa
antena de televisión
YW-4500 Q
Lee a continuación 📖 el manual en español para Toa YW-4500 Q (4 páginas) en la categoría antena de televisión. Esta guía fue útil para 14 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/4
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
YW-4500
WALL-MOUNTED WIRELESS ANTENNA
INSTRUCTION MANUAL
•Be sure to securely mount the unit on the wall or ceiling that is robust enough to stand the antenna weight.
Failure to do so may drop the antenna, causing personal injury and/or property damage.
•Do not expose the unit to rain or an environment where it may be splashed by water or other liquids, as doing so
may result in fire or electric shock.
•To prevent lightning strikes, install the unit at least five meters away from a lightning rod, and yet within the
protective range (angle of 45°) of the lightning conductor. Lightning strikes may cause a fire, electric shock or
personal injury.
•Since the unit is designed for in-door use, do not install it outdoors. If installed outdoors, the aging of parts causes
the unit to fall off, resulting in personal injury. Also, when it gets wet with rain, there is a danger of electric shock.
•Use nuts and bolts that are appropriate for the ceiling's or wall's structure and composition. Failure to do so may
cause the unit to fall, resulting in material damage and possible personal injury.
•Do not touch a plug or antenna during thunder and lightning, as this may result in electric shock.
•Leave the installation of an antenna to your TOA dealer because the installation requires expert knowledge. The
falling of an antenna may cause personal injury.
•Do not place heavy objects on the unit as this may cause it to fall or break which may result in personal injury
and/or property damage. In addition, the object itself may fall off and cause injury and/or damage.
1. SAFETY PRECAUTIONS
•Be sure to read the instructions in this section carefully before use.
•Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
•We also recommend you keep this instruction manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and understand
the safety symbols and messages so you are thoroughly aware of the potential safety hazards.
English: page 1
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION
Q
2
2. GENERAL DESCRIPTION
The TOA YW-4500 is an indoor dipole antenna designed to be used in a UHF band wireless system. A power lamp is
provided on the unit's bottom side to indicate the power supply status (it lights when power is supplied.).
Power for the YW-4500 is supplied on a coaxial cable from the antenna connector of the WT- or WD-
Cable loss can be compensated for by a built-in RF signal booster.
3. INSTALLATION PRECAUTIONS
•Avoid installing the unit in humid or dusty locations, in locations exposed to the direct sunlight, near the heaters, or in
locations generating sooty smoke or steam.
•When installing the YW-4500 in a room of a tall building, be sure to position it more than 1 m apart from a window
to minimize interference caused by external noises of radio waves.
•When using a wireless microphone, keep it 3 m or more away from the YW-4500.
Doing otherwise may cause unused other channels to operate or radio interference to occur.
•When using two or more antennas, they should be spaced out 6 to 18 m apart from each other.
•Take special care when treating coaxial cable end and when connecting the cable to the antenna and BNC
connector. Incomplete cable treatment and connection deteriorate receiving sensitivity, and increase interference
caused by external noises.
•Use the coaxial cable of 75 Ωimpedance.
4. NOMENCLATURE
[Front]
[Side] [Bottom]
[Top]
85 105
120
128
120
116
Sets attenuation level for 0, 10, or –
–20 dB positions.
(For details, refer to "7. ATTENUATOR
SWITCH SETTING.")
Lights when power is
supplied to the unit.
Attenuator switch
Power lamp
Bottom caseTop case
Unit: mm
5800
4820
3
Step 3. Strip coaxial cable end.
•RG-6/U
•RG-11/U
Step 2. Detach the top case from the bottom case.
•If the coaxial cable is wired over the wall from the
ceiling or floor
1. Cut the cable outlet of the frame using a pair of
cutting pliers, etc.
3. Run the coaxial cable through the cable outlet.
Cable outlet
Attenuator switch
Bottom case
Top case
5. INSTALLATION
Unit: mm
ø20
13
10312Jacket
Conductor
Braided shield
Dielectric
Unknit braided shields
and bend it back.
Braided shield
Braided shield
Conductor
13
103
•If the coaxial cable is to be drawn directly from the
wall surface
1. Drill a 20 mm hole.ø
2. Run the coaxial cable through the hole and the
bottom case as well, and draw it out as shown below.
•If the coaxial cable is installed using a recessed
electrical box (Mounting pitch: 83.5 mm)
Draw out the coaxial cable through the electrical box
and the bottom case.
Note: Be sure to use a pipe thick enough to allow the
wired coaxial cable to be easily inserted.
Step 1. Remove 4 screws on the top case.
2. Cut the supplied rubber bushing into halves. One
half is suited for the RG-6U cable (smaller internal
diameter) and other half for the RG-11/U cable
(larger internal diameter). Run the cable through
the bushing. (Insert the bushing into the cable entry
hole after cable installation completion.)
Rubber bushing
Especificaciones del producto
| Marca: | Toa |
| Categoría: | antena de televisión |
| Modelo: | YW-4500 Q |
¿Necesitas ayuda?
Si necesitas ayuda con Toa YW-4500 Q haz una pregunta a continuación y otros usuarios te responderán
antena de televisión Toa Manuales
30 Julio 2024
29 Julio 2024
antena de televisión Manuales
- antena de televisión Philips
- antena de televisión Alpine
- antena de televisión Edimax
- antena de televisión Hirschmann
- antena de televisión Thomson
- antena de televisión Sencor
- antena de televisión Blaupunkt
- antena de televisión TP Link
- antena de televisión Meliconi
- antena de televisión EMOS
- antena de televisión President
- antena de televisión GoGEN
- antena de televisión Kathrein
- antena de televisión Uniden
- antena de televisión Audiovox
- antena de televisión Clas Ohlson
- antena de televisión Zebra
- antena de televisión One For All
- antena de televisión Digi
- antena de televisión Metra
- antena de televisión Wentronic
- antena de televisión August
- antena de televisión Hawking Technologies
- antena de televisión Xoro
- antena de televisión Schwaiger
- antena de televisión EVOLVEO
- antena de televisión RetroSound
- antena de televisión Majestic
- antena de televisión Wilson Electronics
- antena de televisión RF Elements
- antena de televisión Terk
Últimos antena de televisión Manuales
15 Octubre 2024
11 Octubre 2024
9 Octubre 2024
6 Octubre 2024
4 Octubre 2024
30 Septiembre 2024
23 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
17 Septiembre 2024