Tokina 11-16mm f/2.8 DX II Canon Manual de Usario

Tokina Lente 11-16mm f/2.8 DX II Canon

Lee a continuación 📖 el manual en español para Tokina 11-16mm f/2.8 DX II Canon (2 páginas) en la categoría Lente. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Attach/detach the lens to/from your camera according to the instructions in the

manual provided with your camera.

* When attaching/detaching the lens, be careful not to touch the electronic

contacts on the lens mounting surface nor crush these contacts by strong

impact.

* Depending on the lens model, you may hear a sound from inside the lens

when the lens is shaken lightly. This is the sound of the ball bearings that

are designed to smooth the action of the focus ring. It does not indicate a

problem with the general functioning of the lens.

■ Precautions for Use

● Attaching a lens hood

Unlike a SLR camera using a silver halide film, a digital SLR camera

produces a large measure of reflection due to its imaging sensor. It is

therefore recommended that a lens hood be attached when you're

taking photographs with a digital SLR camera. Especially when a

wide-angle lens is used, a lens hood should be attached even indoors.

●

The DX lens is designed exclusively for a digital SLR camera of

APS-C size.

Tokina’s DX lenses are deigned exclusively for use with digital SLR camer-

as having an APS-C sized image sensor. Using the DX lenses with a digital

SLR camera with an imaging sensor of a size larger than APS-C, or with a

SLR camera designed for silver-halide film, will cause vignetting.

● Using Ultra-Wide Angle Lenses.

If you are using a super/Ultra-wide angle lens in auto focus, it may not

focus on the periphery (outer edges) of the frame in AF mode.

Since the depth of field is an ultra-wide angle zoom lens is very deep,

focus detection in the periphery of the frame becomes difficult for

cameras set in multi-point auto focus.

We recommend using a central focus detection setting on your camera

when using auto focus with ultra-wide angle lenses.

※ The Mark (certication mark for conformance with the European export inspection requirements) is shown on lenses containing electronic parts.

The specication data is based on the use of the lens with a Canon camera.

Tokina's DX lenses are designed for use with digital

single-lens reflex (SLR) cameras having APS-C sized

sensors. Do not use Tokina DX lenses with digital SLR

cameras having and image sensor larger than APS-C

size, or with a SLR camera that uses film.

Tokina's FX lenses are designed for digital SLR cameras

with full sized (24x36mm) image sensors.

This lens is intended for use with VDSLR's. Auto focus

can be used when taking still photos but emphasis of

this lens is video use.

Instruction

Manual ❶ Hood Attachment Index

❷ Follow-focus gear

❸ Focus Distance Index

❹ Zoom Ring

❺ Center Index

❻ Hood Right Position Indicator

❼ Manual Focus Ring

❽ Auto-Focus (AF) Position

❾ Manual Focus (MF) Position

󱀓 Focus Distance Scale

󱀔 Focal Length Scale

Model

Item

Optical structure

elements/groups

Angle

of view

Minimum focus

distance (m)

Minimum

aperture

Number of

aperture

diaphragms

Lens

hood

Weight

(g)

Maximum

diameter

(mm)

Overall

length

(mm)

Filter

size

(mm)

104゜∼ ゜8213 11 220.3 89.2 84.0 550− 1 : 11.6 BH77B779

Maximum

macro

magnication

ENGLISH

AT-X 116 PRO DX V

99゜∼ ゜5414 12 220.25 90.2 84.0 532− 1 : 4.94 BH77B779

AT-X 12-28 PRO DX V

103゜∼ ゜6413 12 220.28 94.5 89.0 600− 1 : 4.82 BH821829

AT-X 17-35mm F4 PRO FX V

http://www.tokinalens.com

Descriptions of Parts

How to Attach/Detach the Lens

The lens normally focuses automatically when the focus mode switch on the

lens is set to the Auto focus (AF) position. If the camera is in the manual-focus

(MF) position, adjust the focus by looking into the finder and turning the manual

focus ring. This lens also supports focusing through the use of a focusing aid.

Focusing

If the camera’s built-in flash is used, the light of the built-in flash will be partially

obstructed by the lens, so the picture shows a large shaded area at the bottom

of the image. Therefore, it is advisable to use an external flash when this lens is

attached.

Caution Regarding the Use of a Built-in Flash

This lens is equipped with an interlocking follow focus gear on the manual focus

ring for use in a cinematic follow focus rig.

To use a follow focus, please place the manual focusing ring in the MF position,

focus and shoot.

Before shooting, please confirm that the follow focus gear is meshed properly

with the follow focus gear on the lens.

About Follow Focus

When photographing people with the aid of a flash, their eyes sometimes show

as red in the image. This is called the “red-eye phenomenon.” Follow your

camera manual instructions on how to remove red eye.

Flash Photography (Red-eye Phenomenon)

Performance Table

Use the appropriate sized threaded filters with these lenses. Be sure your filters

are clean before taking a photo. Perfect photographs cannot be taken if the

filter is dirty or when water droplets or other foreign particulates are on the filter.

Clean the filter thoroughly before taking photographs.

* Always use one filter at a time. If two or more filters are used together, or when

a thick filter such as a polarized filter is used, vignetting (darkening at the

corners of the exposed image) may occur.

Filters

For the exposure mode settings, follow the instructions in the manual provided

with your camera.

Exposure Modes

Lens Hood

The lens focus mode can be switched between the

auto focus (AF) mark on the lens barrel and manual

focus (MF) positions at any time by moving the

manual focus ring forward or backward. When the

focus ring is moved back toward the mount the AF

mark will be covered and the lens will only focus

manually. Move the focus ring toward the front of the lens for auto-focus.

* For lenses using either the Nikon or Canon mounting system, it is possible to

use manual focus without switching the focus mode switch on either the

camera body or the lens to the manual position.

In the Auto focus position the manual focus ring turns freely.

* For all Canon mounts and Nikon mount, the built-in AF motor will be automat-

ically turned off when the focus ring is switched to MF mode position.

One-Touch Focus Clutch Mechanism

A lens hood is designed to help reduce or prevent flare and ghost images that are

caused by strong diagonal or side rays of light striking the front of the lens. We

recommend that you use a lens hood at all times to ensure clear, problem-free

photographs and video. The lens hood also provides protection for the lens itself.

* A lens hood can be attached in the reverse direction on the front of the lens

for storage.

Hood right position indicator

Hood attachment index

To securely install the hood, align the mark

on the hood with the hood attachment

index (●) on the lens, and then turn the

hood clockwise, as viewed from the front,

until a click is heard. Then, confirm the

position of the mark on the hood aligns

with the position of the hood position

Indicator on the lens.

To securely install the hood, align the

mark on the hood with the hood attach-

ment indicator ( ) on the lens, and then ●

turn the hood clockwise, as viewed from

the front, until a click is heard.

Confirm that the mark on the hood is ▼

aligned with the center index on the lens.

* When attaching the hood, turn it until you hear a “click” to ensure a secure fit.

If the hood is not attached properly, vignetting could occur.

KT Nakano Building

5-68-10, Nakano, Nakano-ku, Tokyo 164-8616, Japan

AT-X 116 PRO DX V11~16mm F2.8

17~35mm F4

AT-X 12-28 PRO DX V12~28mm F4

series

VDSLR

*When the Canon mount is switched to the MF position, the motor switch in

the lens automatically turns off. (The motor switch in the lens automatically

turns off when Nikon mounts are switched to the MF position as well. )

AT-X 116 PRO DX V

AT-X 17-35mm F4 PRO FX V

Hood Attachment Index

▼mark

TO FIT CANON Digital

AT-X 116 PRO DX V AT-X 12-28 PRO DX V

TO FIT CANON Digital

AT-X 17-35mm F4 PRO FX V

TO FIT CANON Digital

❶

❷

❸

❹

❺

❻

❼

❽

❾

󱀓

󱀔

❶

❷

❸

❹

❺

❻

❼

❽

❾

󱀓

󱀔

❶

❷

❸

❹

❺

❼

❽

❾

󱀓

󱀔

【】【】AT-X 116 PRO DX V AT-X 12-28 PRO DX V

【】AT-X 17-35mm F4 PRO FX V

Especificaciones del producto

Marca:	Tokina
Categoría:	Lente
Modelo:	11-16mm f/2.8 DX II Canon
Color del producto:	Black, Stainless steel
Peso.:	300 g
Ancho:	109 mm
Profundidad:	152 mm
Altura:	43 mm
Peso del embalaje:	1200 g
Tecnología de conectividad:	Bedraad
Dimensiones del paquete (AnxPrxAl):	260 x 184 x 76 mm
Energía promedio:	40 W
Certificación:	CE, c-UL, UL\nCE, C-tick, FCC Class B, ICES Class B, KCC, VCCI
Certificados de sostenibilidad:	RoHS, ENERGY STAR
Temperatura de almacenamiento:	0 - 50 °C
Humedad de almacenamiento:	10 - 90 procent
Canales de salida de audio:	1.0 kanalen
Rango de frecuencia:	80 - 20000 Hz
Relación señal-ruido:	75 dB
Distorsión Armónica Total (THD):	1 procent
Capacidad del bastidor:	1U
voltaje-de-entrada-de-CA:	100-240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Consumo de energía (típico):	13.9 W
Temperatura de funcionamiento (TT):	-40 - 70 °C
Humedad relativa de funcionamiento (VV):	10 - 90 procent
Ajuste de agudos:	Ja
Potencia máxima por canal:	40 W
Clase de amplificador:	D
Tipo de conectividad de los altavoces:	3.5mm
Factor de amortiguamiento:	100
Filtro de paso alto:	Ja