Topeak WhiteLite HP Manual de Usario

Topeak luces de bicicleta WhiteLite HP

Lee a continuación 📖 el manual en español para Topeak WhiteLite HP (2 páginas) en la categoría luces de bicicleta. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
AA Battery 1.5V
AA Battery 1.5V
AA Battery 1.5V
WhiteLiteTM HP 1W AA
1W AA
1W AA
1W AA
User's Guide
Prepare to Ride
GB
BATTERY SETUP
AA Battery 1.5V (3 pcs)
Remove battery holder from
light body and insert new
batteries. Make sure positive
and negative ends of batteries
are installed correctly.
0.5W
On/off and level
switch button
on
off
Blinking
1W
Light
Body
Battery
Holder
ø26mm Bracket
Low Battery Indicator (Red LED)
During long periods of non-use,
remove batteries to prevent damage
caused by leaking battery cells.
WARNING
ø31.8mm Bracket
5˚ 5˚
2mm
Allen key
ø26 ø31.8
2mm
Allen key
Prepare to Ride
1. WhiteLite HP 1W AA is water-resistant. This allows its use in rain, however, WhiteLite HP 1W AA should never
be purposely submerged in water.
2. If the light body or parts become dirty or have been exposed to salt water, gently clean with soft towel using
mild soap and water only. Lubricate and maintain the light body with silicon based grease on the O-rings.
Never use harsh chemicals to clean the lighting system as damage to the housing and lens will occur.
3. Safely and properly dispose of the old batteries according to your local regulations.
4. Never place this lighting system within a child's reach.
5. For ultimate safety, the WhiteLite HP 1W AA should be
used in conjunction with a specific night riding light.
6. In addition to its brightness, the beam is widely
diffused. In case you need to use this light on
public roads, be sure to adjust the angle
downward so as not to blind oncoming traffic.
SAFETY NOTES
Function: 1W, 0.5W and blinking
Bulb: 1W LED
Burn Time (approx):
AA Alkaline Battery 1.5V (3 pcs)
(Standard equipped)
1W - hours (constant use)30
0.5W - hours (constant use)60
Blinking - hours (constant use)120
Operating Temperature: -20˚C ~ 45˚C (-4˚F ~ 113˚F)
Storage Temperature: -20˚C ~ 60˚C (-4˚F ~ 140˚F)
Weight: 73 grams (Light only)
Please contact your Topeak dealer with any questions.
For USA customer service call : 1-800-250-3068
www.topeak.com
* The specifications and design are subject to change without notice.
1-year Warranty: All mechanical components against manufacturer
defects only. Batteries are not covered under any implied warranty.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt.
Items returned without a sales receipt will assume that the warranty
begins on the date of manufacture. All warranties will be void if the
product is damaged due to user crash, abuse, system alteration,
modification, or used in any way not intended as described in this
manual.
Copyright © Topeak, Inc. 2012
WARRANTY
LIGHT REMOVALANGLE TOE-IN ADJUSTMENT
Press release button
and slide backward
to remove the light
from the bracket.
INSTALLATION
ø26mm Bracket for normal size
(ø22.2~ø26mm) handlebar
SPECIFICATIONS
ø31.8mm Bracket
for oversize
BURN TIME
1W
0.5W
Blinking
1
2
3
Power LevelMode
30 hours
60 hours
120 hours
Burn Time
9 20 40 60(hrs)
RED
LED
Low battery
indicator on
Total Burn Time at
1
W
30
hours
Burn times are based on use with
1.5V Alkaline batteries.
Note:
PRESS

Especificaciones del producto

Marca: Topeak
Categoría: luces de bicicleta
Modelo: WhiteLite HP

¿Necesitas ayuda?

Si necesitas ayuda con Topeak WhiteLite HP haz una pregunta a continuación y otros usuarios te responderán