Toshiba LX835 Manual de Usario
Toshiba
De oficina
LX835
Lee a continuación 📖 el manual en español para Toshiba LX835 (159 páginas) en la categoría De oficina. Esta guía fue útil para 14 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/159
GMAD00309012
06/12
If you need assistance:
❖Technical support is available online at Toshiba’s Web site at
support.toshiba.com At this Web site, you will find answers for
many commonly asked technical questions plus many
downloadable software drivers, BIOS updates, and other
downloads.
For more information, see “If Something Goes Wrong” on
page 109 in this guide.
LX800 Series
User’s Guide
2
Model: LX800 Series
Recordable and/or ReWritable Drive(s) and
Associated Software Warranty
The computer system you purchased may include Recordable and/or
ReWritable optical disc drive(s) and associated software, among the most
advanced data storage technologies available. As with any new technology,
you must read and follow all set-up and usage instructions in the applicable
user guides and/or manuals enclosed or provided electronically. If you fail
to do so, this product may not function properly and you may lose data or
suffer other damage. TOSHIBA AMERICA INFORMATION SYSTEMS,
INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT
WARRANT THAT OPERATION OF THE PRODUCT WILL BE
UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,
ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO
RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS,
PROFITS, PROGRAMS, DATA, NETWORK SYSTEMS OR
REMOVABLE STORAGE MEDIA ARISING OUT OF OR RESULTING
FROM THE USE OF THE PRODUCT, EVEN IF ADVISED OF THE
POSSIBILITY THEREOF.
Protection of Stored Data
For your important data, please make periodic back-up copies of all the data
stored on the hard disk or other storage devices as a precaution against possible
failures, alteration, or loss of the data. IF YOUR DATA IS ALTERED OR
LOST DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF
THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE
DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE
LIABLE FOR ANY DAMAGE OR LOSS OF DATA, OR ANY OTHER
DAMAGE RESULTING THEREFROM. WHEN COPYING OR
TRANSFERRING YOUR DATA, PLEASE BE SURE TO CONFIRM
WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR
TRANSFERRED. TOSHIBA DISCLAIMS ANY LIABILITY FOR THE
FAILURE TO COPY OR TRANSFER THE DATA CORRECTLY.
Critical Applications
The computer you have purchased is not designed for any “critical applications.”
“Critical applications” means life support systems, medical applications,
connections to implanted medical devices, commercial transportation, nuclear
facilities or systems or any other applications where product failure could lead to
injury to persons or loss of life or catastrophic property damage.
ACCORDINGLY, TOSHIBA, ITS AFFILIATES AND SUPPLIERS
DISCLAIM ANY AND ALL LIABILITY ARISING OUT OF THE USE
OF THE COMPUTER PRODUCTS IN ANY CRITICAL
APPLICATIONS. IF YOU USE THE COMPUTER PRODUCTS IN A
CRITICAL APPLICATION, YOU, AND NOT TOSHIBA, ASSUME
FULL RESPONSIBILITY FOR SUCH USE.
3
FCC Notice “Declaration of Conformity Information”
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, it may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
❖Reorient or relocate the receiving antenna.
❖Increase the separation between the equipment and receiver.
❖Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
❖Consult the dealer or an experienced radio/TV technician for help.
Only Peripherals complying with the FCC Class B limits may be attached to this
equipment. Operation with noncompliant peripherals or peripherals not
recommended by Toshiba is likely to result in interference to radio and TV reception.
Shielded cables must be used between the external devices and the computer's
ports. Changes or modifications made to this equipment not expressly approved by
Toshiba or parties authorized by Toshiba could void the user's authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
❖This device may not cause harmful interference.
❖This device must accept any interference received, including interference
that may cause undesired operation.
Contact Toshiba’s Support Website at support.toshiba.com.
Industry Canada Requirement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conformé à la norme NMB-003 du
Canada.
NOTE
NOTE
NOTE
NOTENOTE
4
Wireless Interoperability
The TOSHIBA Wireless LAN Mini PCI Card products are designed to be
interoperable with any wireless LAN product that is based on Direct Sequence
Spread Spectrum (DSSS) radio technology, and is compliant to:
❖The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as defined
and approved by the Institute of Electrical and Electronics Engineers.
❖The Wireless Fidelity (Wi-Fi
®) certification as defined by the Wi-Fi Alliance.
The “Wi-Fi CERTIFIED” logo is a certification mark of the Wi-Fi Alliance.
Wireless LAN and Your Health
Wireless LAN products, like other radio devices, emit radio frequency
electromagnetic energy. The level of energy emitted by Wireless LAN devices
however is far much less than the electromagnetic energy emitted by wireless
devices like for example mobile phones.
Because Wireless LAN products operate within the guidelines found in radio
frequency safety standards and recommendations, TOSHIBA believes Wireless
LAN is safe for use by consumers. These standards and recommendations reflect
the consensus of the scientific community and result from deliberations of panels
and committees of scientists who continually review and interpret the extensive
research literature.
In some situations or environments, the use of Wireless LAN may be restricted
by the proprietor of the building or responsible representatives of the
organization. These situations may for example include:
❖Using the Wireless LAN equipment on board airplanes, or
❖In any other environment where the risk of interference to other devices or
services is perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of wireless devices in a
specific organization or environment (e.g. airports), you are encouraged to ask for
authorization to use the Wireless LAN device prior to turning on the equipment.
Exposure to Radio Frequency Radiation
The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is
far below the FCC radio frequency exposure limits. Nevertheless, the
TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that
the potential for human contact during normal operation is minimized. The
antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
5
Regulatory Information
The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict
accordance with the manufacturer’s instructions as described in the user
documentation that comes with the product. This device complies with the
following radio frequency and safety standards.
Canada – Industry Canada (IC)
This device complies with RSS 210 of Industry Canada.
The installer of this radio equipment must ensure that the antenna is located
or pointed such that it does not emit RF field in excess of Health Canada
limits for the general population; consult Safety Code 6, obtainable from
Health Canada’s Web site www.hc-sc.gc.ca/rpb. The RF device shall not be
co-located with any other transmitter that has not been tested with this
device.
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of this device.
L’ utilisation de ce dispositif est soumis aux deux conditions suivantes: (1) il ne
doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à
accepter tout brouillage radioélectrique reçu, même s’il est susceptible de
compromettre son fonctionnement.
The term “IC” before the equipment certification number only signifies that the
Industry Canada technical specifications were met.
To prevent radio interference to the licensed service, this device is intended to be
operated indoors and away from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed outdoors is subject to
licensing.
Pour empecher que cet appareil cause du brouillage au service faisant l’objet
d’une licence, il doit etre utilize a l’interieur et devrait etre place loin des fenetres
afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne
d’emission) est installe a l’exterieur, il doit faire l’objet d’une licence.
Bluetooth® Wireless Technology Interoperability
Bluetooth® Cards from TOSHIBA are designed to be interoperable with any
product with Bluetooth wireless technology that is based on Frequency Hopping
Spread Spectrum (FHSS) radio technology, and is compliant to:
❖Bluetooth Specification as defined and approved by The Bluetooth Special
Interest Group.
❖Logo certification with Bluetooth wireless technology as defined by The
Bluetooth Special Interest Group.
6
Always use Bluetooth cards from TOSHIBA in order to enable wireless
networks over two or more (up to a total of seven) TOSHIBA computers
using these cards. Please contact TOSHIBA computer product support on
Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in
Europe or support.toshiba.com in the United States for more information.
When you use Bluetooth cards from TOSHIBA close to 2.4 GHz Wireless
LAN devices, Bluetooth transmissions might slow down or cause errors. If
you detect certain interference while you use Bluetooth cards from TOSHIBA,
always change the frequency, move your computer to the area outside of the
interference range of 2.4 GHz Wireless LAN devices (40 meters/43.74 yards
or more) or stop transmitting from your computer. Please contact TOSHIBA
computer product support on Web site http://www.toshiba-europe.com/
computers/tnt/bluetooth.htm in Europe or support.toshiba.com in the United
States for more information.
Bluetooth and Wireless LAN devices operate within the same radio frequency
range and may interfere with one another. If you use Bluetooth and Wireless
LAN devices simultaneously, you may occasionally experience a less than
optimal network performance or even lose your network connection. If you
should experience any such problem, immediately turn off either one of your
Bluetooth or Wireless LAN. Please contact Toshiba computer product
support on Web site http://www.toshiba-europe.com/computers/tnt/
bluetooth.htm in Europe or support.toshiba.com in the United States for
more information.
Bluetooth® Wireless Technology and Your Health
The products with Bluetooth
® wireless technology, like other radio devices, emit
radio frequency electromagnetic energy. The level of energy emitted by devices
with Bluetooth wireless technology however is much less than the
electromagnetic energy emitted by wireless devices such as mobile phones.
Because products with Bluetooth wireless technology operate within the
guidelines found in radio frequency safety standards and recommendations,
TOSHIBA believes Bluetooth wireless technology is safe for use by consumers.
These standards and recommendations reflect the consensus of the scientific
community and result from deliberations of panels and committees of scientists
who continually review and interpret the extensive research literature.
In some situations or environments, the use of Bluetooth wireless technology
may be restricted by the proprietor of the building or responsible representatives
of the organization. These situations may, for example, include in any other
environment where the risk of interference to other devices or services is
perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of wireless devices in a
specific organization or environment (e.g. airports), you are encouraged to ask for
7
authorization to use the device with Bluetooth wireless technology prior to
turning on the equipment.
Exposure to Radio Frequency Radiation
The radiated output power of the Bluetooth Card from TOSHIBA is far below
the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card
from TOSHIBA shall be used in such a manner that the potential for human
contact during normal operation is minimized.
Regulatory statements
This product complies with any mandatory product specification in any country/
region where the product is sold. In addition, the product complies with the
following:
European Union (EU) and EFTA
This equipment complies with the R&TTE directive 1999/5/EC and has been
provided with the CE mark accordingly.
Optical Disc Drive Safety Instructions
This appliance contains a laser system and is classified as a CLASS 1
LASER PRODUCT. To use this model properly, read the User’s Guide
carefully and keep it for your future reference.
Never attempt to disassemble, adjust or repair an optical disc drive. You
could damage the drive. You would also be exposed to laser light or other
safety hazards, resulting in serious injury. Always contact an authorized
Toshiba service provider, if any repair or adjustment is required.
Location of the Required Label
(Sample shown below. Location of the label and manufacturing information may vary.)
8
Copyright
This guide is copyrighted by Toshiba America Information Systems, Inc. with all
rights reserved. Under the copyright laws, this guide cannot be reproduced in any
form without the prior written permission of Toshiba. No patent liability is
assumed, however, with respect to the use of the information contained herein.
©2012 by Toshiba America Information Systems, Inc. All rights reserved.
Export Administration Regulation
This document contains technical data that may be controlled under the U.S.
Export Administration Regulations, and may be subject to the approval of the
U.S. Department of Commerce prior to export. Any export, directly or indirectly,
in contravention of the U.S. Export Administration Regulations is prohibited.
Notice
The information contained in this manual, including but not limited to any
product specifications, is subject to change without notice.
TOSHIBA CORPORATION AND TOSHIBA AMERICA
INFORMATION SYSTEMS, INC. (TOSHIBA) PROVIDES NO
WARRANTY WITH REGARD TO THIS MANUAL OR ANY
OTHER INFORMATION CONTAINED HEREIN AND HEREBY
EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR
PURPOSE WITH REGARD TO ANY OF THE FOREGOING.
TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES
INCURRED DIRECTLY OR INDIRECTLY FROM ANY
TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS
CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN
THE PRODUCT AND THE MANUAL. IN NO EVENT SHALL
TOSHIBA BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL, SPECIAL, OR EXEMPLARY DAMAGES,
WHETHER BASED ON TORT, CONTRACT OR OTHERWISE,
ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL
OR ANY OTHER INFORMATION CONTAINED HEREIN OR THE
USE THEREOF.
Trademarks
eco Utility is a trademark of Toshiba America Information Systems, Inc. and/or
Toshiba Corporation.
Adobe and Photoshop are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
Atheros is a registered trademark of Atheros Communications, Inc.
Blu-ray and Blu-ray Disc are trademarks of the BD Association.
9
Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any
use of such marks by Toshiba is under license. Other trademarks and trade names
are those of their respective owners.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing, LLC.
Intel, Intel Core, Celeron, Centrino and Pentium are trademarks or registered
trademarks of Intel Corporation or its subsidiaries in the United States and other
countries.
Memory Stick, Memory Stick PRO, and Memory Stick PRO Duo are trademarks
or registered trademarks of Sony Corporation.
Microsoft, Outlook, Windows, and Windows Media are either registered
trademarks or trademarks the United States and/or of Microsoft Corporation in
other countries.
MultiMediaCard and MMC are registered trademarks of MultiMediaCard Association.
Secure Digital and SD are trademarks of SD Card Association.
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
All other brand and product names are trademarks or registered trademarks of
their respective companies.
Licenses
This Product is licensed under the AVC, the VC-1 and the MPEG-4 Part 2 Visual
patent portfolio licenses for the personal and non-commercial use of a consumer
to (i) encode video in compliance with the above standards (“Video Standards”)
and/or (ii) decode AVC, VC-1 and MPEG-4 Part 2 Visual that was encoded by a
consumer engaged in personal and non-commercial activity or was obtained
from a video provider licensed to provide such video. None of the licenses extend
to any other product regardless of whether such product is included with this
product in a single article. No license is granted or shall be implied for any other
use. Additional information may be obtained from MPEG LA, LLC.
See www.mpegla.com.
Computer Recycling Information
As part of a commitment to people and the future, Toshiba promotes the efficient
use of resources by working to achieve our zero-waste-to-landfill goal at all our
production sites. In addition to our existing waste reduction and recycling
policies, Toshiba is strongly committed to reducing electronic waste. In order to
ensure efficient use of resources and appropriate treatment of hazardous
substances, in accordance with recycling regulations in each state, country, and
territory, Toshiba wants to make it easy for customers to recycle products at the
end of the life cycle. To learn more about Toshiba's sustainability commitment,
visit us.toshiba.com/green.
Reuse, Donation, Recycling
Functional computers can be donated to a local charity or resold through other
programs. Non working Toshiba computers can be mailed-back for free
recycling. For additional details, please visit us.toshiba.com/recycle.
10
Contents
Introduction................................................................................ 16
This guide ...............................................................18
Safety icons ............................................................19
Other icons used...............................................19
Your computer’s features and specifications ....20
Other documentation ..............................................20
Service options .......................................................20
Chapter 1: Getting Started....................... ............. 21.....................
Setting up a work environment .........................21
Precautions.......................................................22
Important information on
your computer’s cooling fan .......................23
Setting up your computer .......................................23
Connecting to a power source ................................24
Using the computer for the first time......................26
Setting up your keyboard and mouse ...............26
Turning on the power .......................................28
Setting up your software...................................29
Registering your computer with Toshiba ................29
11
Contents
Adding optional external devices.............................29
Adding memory (optional)......................................30
Installing a memory module .............................30
Removing a memory module............................35
Checking total memory .....................................37
Recovering the Internal Storage Drive ....................38
Recovering to out-of-box state
(recommended recovery method)...............39
Recovering of factory default software
with user’s data...........................................42
Recovering without changing
the internal storage drive partitions ............45
Recovering to a custom size partition...............48
Creating recovery media ...................................50
Restoring from recovery media ........................52
Erasing the Internal Storage Drive ..........................54
Checking the internal storage drive
operating status ................................................56
Installing drivers and applications.....................56
Connecting an external device.................................56
Using external display devices ................................57
Using the HDMI™ In port..................................57
Customizing your computer’s settings....................58
Caring for your computer........................................58
Cleaning the computer......................................58
Moving the computer........................................58
Using a computer lock ......................................59
Chapter 2: Learning the Basics................................................. 60
Computing tips .......................................................60
Using the wireless mouse.......................................61
Replacing the batteries .....................................62
Using the wireless keyboard ...................................63
Replacing the batteries .....................................63
Keyboard functions...........................................64
Character keys .................................................64
12
Contents
Ctrl, Fn, and Alt keys .........................................65
Function keys....................................................65
Special Windows® keys ...................................65
Touch screen ..........................................................65
Starting a program..................................................66
Starting a program using
the Search programs and files field ............66
Starting a program from the Start menu...........67
Saving your work....................................................67
Backing up your work .............................................68
Restoring your work .........................................68
Using the optical disc drive.....................................69
Viewing Blu-ray Disc™ movies .........................69
Optical disc drive components..........................70
Inserting an optical disc ...................................70
Playing an audio CD..........................................72
Playing optical media........................................72
Recording optical media ...................................73
Removing a disc with the computer on.............73
Removing a disc with the computer off ............74
Toshiba’s online resources .....................................74
Chapter 3: Computing...............................................................75
Toshiba’s energy-saver design................................75
Power management ..........................................75
Charging the RTC battery........................................76
Power Plans............................................................76
Using the TOSHIBA eco power plan........................78
Chapter 4: Exploring Your Computer’s Features.....................79
Exploring the desktop .............................................79
Finding your way around the desktop ...............80
Setting up for communications...............................82
Connecting your computer to a network...........83
Exploring audio features .........................................83
Recording sounds.............................................83
13
Contents
Using external speakers or headphones............84
Using the Web Camera ...........................................85
Using the Memory card reader................................85
Inserting memory media...................................86
Removing memory media.................................87
Toshiba remote control...........................................88
Using the Toshiba remote control.....................88
Chapter 5: Utilities...................................................................... 89
TOSHIBA Assist ......................................................90
Connect.............................................................91
Secure...............................................................91
Protect & Fix .....................................................92
Optimize............................................................93
TOSHIBA Application Installer.................................94
Setting passwords ..................................................95
Using a supervisor password............................95
Using a user password .....................................97
Deleting a user password..................................97
TOSHIBA Face Recognition Utility...........................98
TOSHIBA PC Diagnostic Tool Utility........................99
Mouse Utility ........................................................100
TOSHIBA Hardware Setup.....................................101
TOSHIBA Sleep Utility ...........................................102
Starting the TOSHIBA Sleep Utility..................102
USB Sleep and Charge ....................................102
Enabling/Disabling USB Sleep and Charge......103
Power supply mode settings...........................103
TOSHIBA Button Support......................................105
TOSHIBA Accessibility ..........................................106
TOSHIBA eco Utility™ ...........................................107
TOSHIBA Service Station ......................................107
TOSHIBA PC Health Monitor.................................108
14
Contents
Chapter 6: If Something Goes Wrong....................................109
Problems that are easy to fix ................................109
Problems when you turn on the computer............110
The Windows® operating system is not working ..111
Using Startup options to fix problems ............111
Internet problems ...........................................112
The Windows® operating system
can help you .............................................112
Fixing a problem with Device Manager .................113
Checking device properties .............................113
Memory problems ................................................114
Power and the battery...........................................114
Keyboard problems...............................................115
Display problems ..................................................115
Disk or storage drive problems.............................116
Error-checking ................................................116
Optical disc drive problems...................................117
Sound system problems .......................................119
Printer problems...................................................120
Wireless networking problems..............................121
DVD and Blu-ray Disc™ operating problems.........122
Develop good computing habits ...........................123
Data and system configuration backup
in the Windows® operating system...........124
If you need further assistance...............................129
Contacting Toshiba .........................................129
Other Toshiba Internet Web sites..........................129
Toshiba’s worldwide offices..................................130
Appendix A: Hot Keys/TOSHIBA Cards..................................131
Hot Key Cards .......................................................131
Using the Hot Key Cards .................................132
Hot key functions..................................................132
Help ...............................................................132
Display brightness ..........................................133
Internet and Media Control Buttons ................134
15
Contents
Volume Mute ..................................................135
Disabling or enabling wireless devices............136
Zoom (Display resolution) ..............................137
Appendix B: Power Cord/Cable Connectors..........................138
Glossary.................................................................................... 139
Index....................... ................154...................................................
16
Introduction
Welcome to the world of powerful, multimedia computing.
Your computer model may be ENERGY STAR
® qualified. If the
model you purchased is qualified, it is labeled with the ENERGY
STAR® logo on the computer and the following information
applies.
Toshiba is a partner in the Environmental Protection Agency’s
(EPA) ENERGY STAR® Program and has designed this computer
to meet the latest ENERGY STAR® guidelines for energy
efficiency.
Your computer ships with the power management options preset to
a configuration that will provide the most stable operating
environment and optimum system performance. To conserve
energy, your computer is set to enter the low-power Sleep mode
which shuts down the system and display within 15 minutes of
inactivity. We recommend that you leave this and other energy
saving features active, so that your computer will operate at its
maximum energy efficiency. You can wake the computer from
Sleep mode by pressing the power button. See the "Computing"
section of the Toshiba User’s Guide for more information on using
power management settings to conserve energy.
When considering additions to your home office, purchase products
that have earned the ENERGY STAR® for all your equipment
needs, which can save you money, save energy, and help protect the
climate.
Visit www.energystar.gov or www.energystar.gov/powermanagement
for more information regarding the ENERGY STAR
® Program
17
Introduction
This computer is compatible with European Union Directive
2002/95/EC, Restriction of the use of certain Hazardous Substances
in electrical and electronic equipment (RoHS), which restricts use of
lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE.
Toshiba requires its computer component suppliers to meet RoHS
requirements and verifies its suppliers’ commitment to meeting
RoHS requirements by conducting component sampling inspections
during the product design approval process.
Certain Microsoft® software product(s) included with this computer
may use technological measures for copy protection. IN SUCH
EVENT, YOU WILL NOT BE ABLE TO USE THE PRODUCT IF YOU
DO NOT FULLY COMPLY WITH THE PRODUCT ACTIVATION
PROCEDURES. Product activation procedures and Microsoft’s
privacy policy will be detailed during initial launch of the product, or
upon certain reinstallations of the software product(s) or
reconfigurations of the computer, and may be completed by Internet
or telephone (toll charges may apply).
Some software may differ from its retail version (if available), and
may not include user manuals or all program functionality.
The product specifications and configuration information are
designed for a product Series. Your particular model may not have
all the features and specifications listed or illustrated. For more
detailed information about the features and specifications on your
particular model, please visit Toshiba’s Web site at
support.toshiba.com.
While Toshiba has made every effort at the time of publication to
ensure the accuracy of the information provided herein, product
specifications, configurations, prices, system/component/options
availability are all subject to change without notice. For the most
up-to-date product information about your computer, or to stay
current with the various computer software or hardware options, visit
Toshiba’s Web site at support.toshiba.com.
NOTE
NOTE
NOTE
NOTENOTE
NOTE
NOTE
NOTE
NOTENOTE
NOTE
NOTE
NOTE
NOTENOTE
18
Introduction
This guide
This guide
This guide introduces the computer's features as well as some basic
procedures needed to perform tasks in Windows
® 7. You can:
❖Read the entire guide from beginning to end.
❖Skim through and stop when a topic interests you.
❖Use the table of contents and the index to find specific
information.
19
Introduction
Safety icons
Safety icons
This manual contains safety instructions that must be observed to
avoid potential hazards that could result in personal injuries,
damage to your equipment, or loss of data. These safety cautions
have been classified according to the seriousness of the risk, and
icons highlight these instructions as follows:
Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
Indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
Provides important information.
Other icons used
Additional icons highlight other helpful or educational information:
TECHNICAL NOTE: This icon indicates technical information about
the computer.
HINT: This icon indicates helpful hints and tips.
DEFINITION: This icon indicates the definition of a term used in the
text.
NOTE
NOTE
NOTE
NOTENOTE
20
Introduction
Other documentation
Your computer’s features and specifications
Certain computer chassis are designed to accommodate all possible
configurations for an entire product Series. Your select model may
not have all the features and specifications corresponding to all of
the icons or switches shown on the computer chassis, unless you
have selected all those features.
This information applies to all the features and icons described in
this guide.
Below are examples of some of the many possible icons used on
your computer:
(Sample Illustration) System icons
Other documentation
Your computer comes with the following documentation:
❖An electronic version of the User’s Guide (this document)
❖A Quick Start Document
❖It may also contain guides for other programs that may come
with your system.
For accessory information, visit Toshiba’s Web site at
accessories.toshiba.com.
Service options
Toshiba offers a full line of optional service programs to
complement its standard limited warranty. Toshiba’s standard
limited warranty, extended warranty, and service upgrade terms
and conditions are available at warranty.toshiba.com.
To stay current on the most recent software and hardware options
for your computer, and for other product information, be sure to
regularly check the Toshiba Web site at support.toshiba.com.
If you have a problem or need to contact Toshiba, see “If Something
Goes Wrong” on page 109.
21
Chapter 1
Getting Started
This chapter provides tips for using your computer effectively,
summarizes how to connect components, and explains what to do
the first time you use your computer.
Please read the safety instruction information on the Quick Start
document (that shipped with your computer) carefully and make
sure you fully understand the instructions before you attempt to use
your computer in order to avoid potential hazards that could cause
bodily injury, property damage, or damage the computer.
Setting up a work environment
Place the computer on a hard flat surface that is large enough for the
computer and any other items you are using, such as a printer.
Leave enough space around the computer and other equipment to
provide adequate ventilation.
To keep your computer in prime operating condition, protect your
work area from:
❖Dust, moisture, and direct sunlight.
❖Equipment that generates a strong electromagnetic field, such
as stereo speakers (other than speakers that are connected to
the computer) or speakerphones.
22
Getting Started
❖Rapid changes in temperature or humidity and sources of
temperature change such as air conditioner vents or heaters.
❖Extreme heat, cold, or humidity.
❖Liquids and corrosive chemicals.
Precautions
Your computer is designed to provide optimum safety and ease of
use. You should observe certain precautions to further reduce the
risk of personal injury or damage to the computer.
Never allow any liquids to spill into any part of your computer, and
never expose the computer to rain, water, seawater or moisture.
Exposure to liquid or moisture can cause electric shock or fire,
resulting in damage or serious injury. If any of these eventualities
should accidentally occur, immediately:
1. Turn off the computer.
2. Disconnect the AC adaptor from the power plug socket and
computer.
Failure to follow these instructions could result in serious injury or
permanent damage to the computer.
Do not turn on the power again until you have taken the computer to
an authorized service center.
❖Never turn off the computer if a drive light indicates a drive is
active.
Turning off the computer while it is reading from or writing to
a disk/disc or flash media may damage the disk/disc or flash
media, the drive, or both.
❖Keep the computer and disks away from objects that generate
strong magnetic fields, such as large stereo speakers.
Information on some disks is stored magnetically. Placing a
magnet too close to a disk can erase important files.
Handle discs carefully. Avoid touching the surface of the disc. Grasp
it by its center hole and edge. If you handle the disc incorrectly, you
could damage the disc and possibly lose data.
❖Scan all new files for viruses.
This precaution is especially important for files you receive via
email or download from the Internet. Occasionally, even new
23
Getting Started
Setting up your computer
programs you buy from a supplier may contain a computer
virus. You need a special program to check for viruses.
Important information on your computer’s cooling fan
Your computer may have a CPU cooling fan that cools the CPU by
drawing outside air into the computer.
Always make sure your computer and AC adaptor have adequate
ventilation and are protected from overheating when the power is turned
on or when an AC adaptor is connected to a power outlet (even if your
computer is in Sleep mode). In this condition, observe the following:
❖ Never cover your computer or AC adaptor with any object.
❖ Never place your computer or AC adaptor near a heat source,
such as an electric blanket or heater.
❖ Never cover or block the air vents including those located on the
back of the computer.
❖ Always operate your computer on a hard flat surface.
Overheating your computer or AC adaptor could cause system
failure, computer or AC adaptor damage or a fire, possibly resulting
in serious injury.
Setting up your computer
TECHNICAL NOTE: You must complete all setup steps up to and
including “Setting up your software” on page 29 before adding
external or internal components to your computer. These
components include, but are not limited to a printer and memory.
Please handle your computer carefully to avoid scratches and
damage.
NOTE
NOTE
NOTE
NOTENOTE
24
Getting Started
Connecting to a power source
Connecting to a power source
Your computer requires power to operate. Use the power cord/cable
and AC adaptor to connect the computer to a live electrical outlet.
Never pull on a power cord/cable to remove a plug from a socket.
Always grasp the plug directly. Failure to follow this instruction may
damage the cord/cable, and/or result in a fire or electric shock,
possibly resulting in serious injury.
Always confirm that the power plug (and extension cable plug if
used) has been fully inserted into the socket, to ensure a secure
electrical connection. Failure to do so may result in a fire or electric
shock, possibly resulting in serious injury.
Be careful if you use a multiple connector. An overload on one socket
could cause a fire or electric shock, possibly resulting in serious
injury.
Always use the TOSHIBA AC adaptor that was provided with your
computer, or use AC adaptors specified by TOSHIBA to avoid any
risk of fire or other damage to the computer. Use of an incompatible
AC adaptor could cause fire or damage to the computer possibly
resulting in serious injury. TOSHIBA assumes no liability for any
damage caused by use of an incompatible adaptor.
(Sample Illustration) Power cord/cable and AC adaptor
Power cord/cable
AC adaptor
AC adaptor cord
25
Getting Started
Connecting to a power source
To connect AC power to the computer:
1Connect the power cord/cable to the AC adaptor.
(Sample Illustration) Connecting the power cord/cable to the AC
adaptor
2Plug the AC adaptor cord into the DC-IN on the back of the
computer.
(Sample Illustration) Connecting the AC adaptor cord to the
computer
3Connect the power cord/cable to a live electrical outlet.
Never attempt to connect or disconnect a power plug with wet hands.
Failure to follow this instruction could result in an electric shock,
possibly resulting in serious injury.
_
_
_
__ +
26
Getting Started
Using the computer for the first time
Using the computer for the first time
The computer is now ready for you to turn it on and begin using it.
Adjust the display to a comfortable viewing angle.
Small bright dots may appear on your screen display when you
turn on your computer. Your display contains an extremely large
number of thin-film transistors (TFT) and is manufactured using
high-precision technology. Any small bright dots that may appear
on your display are an intrinsic characteristic of the TFT
manufacturing technology. Over a period of time, and depending
on the usage of the computer, the brightness of the screen will
deteriorate. This is also an intrinsic characteristic of the screen
technology.
Setting up your keyboard and mouse
The keyboard and mouse may be pre-installed. Press and hold the
Connect button located on the underside of both the keyboard and
mouse, while turning ON the computer.
(Sample Illustration) Connecting keyboard and mouse
If your keyboard and mouse are not pre-installed, please follow
these instructions:
1Remove the RF mini USB dongle, Keyboard and Mouse from
packaging.
(Sample Illustration) RF mini USB dongle
Connect buttons
CONNECT
Connect Button
TOP
27
Getting Started
Using the computer for the first time
2Remove the RF mini USB dongle cover, located on the back of
the computer on the lower left corner.
(Sample Illustration) RF mini USB dongle cover
3Insert the mini USB dongle into the mini USB port.
4Insert batteries in the keyboard.
5Insert batteries in the mouse.
6Ensure that both mouse and keyboard are switched to the "ON"
position. Your wireless keyboard and mouse are now
connected.
If there is no response from the wireless devices, press the connect
buttons on the keyboard, mouse, and RF mini USB dongle for a few
seconds, while turning ON the computer.
Please refer to the illustrations above for location of covers and
buttons.
D
RF USB dongle cover
RF mini USB dongle cover
28
Getting Started
Using the computer for the first time
Turning on the power
To turn on the computer:
1Make sure the power is properly connected and ready.
2Check to ensure that all drives and slots are empty. Press and
release the power button. The ON/OFF light glows white.
(Sample Illustration) Turning on the power
The pre-installed operating system will load automatically.
When you turn on the computer for the first time, do not turn off the
power again until the operating system has loaded completely.
Power button
29
Getting Started
Registering your computer with Toshiba
Setting up your software
The names of windows displayed, and the order in which windows
appear, may vary according to your software setup choices.
The first time you turn on your computer, the Setup Wizard guides
you through steps to set up your software. Follow the on-screen
instructions.
Registering your computer with Toshiba
Product registration is strongly recommended, and allows Toshiba
to send you periodic updates, announcements, and special offers
applicable to your product. Product registration can be completed
by either visiting the Toshiba Website at register.toshiba.com
or by clicking the Start button and, in the Search field, type
Registration. In the list that appears above, click on your selection.
Failure to complete Product Registration will not diminish
Customer rights under the Toshiba standard limited Warranty.
To register online, you must be connected to the Internet.
Adding optional external devices
Before adding external devices, Toshiba recommends first setting up
the software.
After starting your computer for the first time you may want to:
❖Add more memory (see “Adding memory (optional)” on
page 30)
❖Connecting external devices (see “Connecting an external
device” on page 56)
NOTE
NOTE
NOTE
NOTENOTE
NOTE
NOTE
NOTE
NOTENOTE
NOTE
NOTE
NOTE
NOTENOTE
30
Getting Started
Adding memory (optional)
Adding memory (optional)
HINT: To purchase additional memory modules, see the
accessories information packaged with your system or visit
accessories.toshiba.com.
Your computer comes with enough memory to run most of today’s
popular applications. You may want to increase the computer’s
memory if you use complex software or process large amounts of
data.
Before adding external devices, Toshiba recommends first setting up
the software.
Installing a memory module
Memory modules can be installed in the memory module slots on
the back of the computer. You will need a small Phillips
screwdriver for this procedure.
If the computer has been running recently, the memory module(s)
may be hot. The surrounding area may also be hot. Allow the
module(s) to cool to room temperature before replacing it. Avoid
touching the cover, the module(s), and the surrounding area before
they have cooled. Failure to follow these directions could result in
minor bodily injury.
To avoid damaging the computer’s screws, use a small Phillips
screwdriver of the correct size that is in good condition.
Installing a memory module with the computer’s power on will
damage the computer, the module, or both. Always turn the
computer's power off first.
NOTE
NOTE
NOTE
NOTENOTE
31
Getting Started
Adding memory (optional)
The computer has two memory slots—Slot A and Slot B. You can
install one or two memory modules.
Before you install or remove a memory module, turn off the computer
using the Start menu. If you install or remove a memory module
while the computer is in Sleep or Hibernation mode, data will be lost.
For this model, Slot A is the bottom slot. Slot B is the top slot. If only
one memory module is to be installed, it must be installed in Slot A.
If the computer is on, begin at step 1; otherwise, skip to step 3.
1Click Start.
(Sample Image) Shut down button
2Click the Shut down button in the lower-right corner of the
Start menu.
The computer closes all open programs, shuts down the
operating system, and then turns off.
3Unplug and remove any cables connected to the computer,
including the AC adaptor.
Do not try to remove a memory module with the computer turned on.
You can damage the computer and the memory module.
Do not remove the memory module while the computer is in Sleep or
Hibernation mode. The computer could hang up the next time you
turn it on and data in memory will be lost. In either of the above
cases, the Sleep configuration will not be saved.
NOTE
NOTE
NOTE
NOTENOTE
Shut down button
Start button
32
Getting Started
Adding memory (optional)
4Using a small Phillips screwdriver, loosen the captive screw
that secures the memory module slot cover.
(Sample Illustration) Removing the memory module slot cover
5Remove the memory module slot cover.
6Place the screw and the cover in a safe place so that you can
retrieve them later.
Static electricity can damage the memory module. Before you handle
the module, touch a grounded metal surface to discharge any static
electricity you may have built up.
Avoid touching the connector on the memory module or on the
computer. Grease or dust on the connector may cause memory
access problems.
7Carefully remove the new memory module from its antistatic
packaging, without touching its connector.
8Locate an empty memory module slot on the back of the
computer.
If no memory slot is available, you must remove a module by
performing steps 2 3- of “Removing a memory module” on page 35.
If your system has the memory modules stacked on top of one
another, you must remove the top module first before
removing/installing the bottom module.
Back of monitor
Memory module slot cover
NOTE
NOTE
NOTE
NOTENOTE
NOTE
NOTE
NOTE
NOTENOTE
33
Getting Started
Adding memory (optional)
For this model, Slot A is the bottom slot. Slot B is the top slot. If only
one memory module is to be installed, it must be installed in Slot A.
9Pick up the memory module by its sides, avoiding any contact
with its connector. Position the module toward the socket,
aligning the connector’s notch with the matching key in the
socket.
(Sample Illustration) Aligning the memory module with the socket
10 Firmly press the memory module into the memory slot’s socket
at approximately a 30-degree angle (to the horizontal surface
of the computer).
(Sample Illustration) Inserting the memory module into the socket
NOTE
NOTE
NOTE
NOTENOTE
latch
latch
key
notch
connector
34
Getting Started
Adding memory (optional)
11 Once the module’s connector is fully inserted into the socket,
press downward on the top edge of the module to seat the
module into the latches at the sides of the socket. These latches
should “snap” into place securely with the corresponding
cutouts in the side of the module. If the latches and cutouts do
not line up correctly, repeat steps 10 11- .
(Sample Illustration) Pressing down on the memory module
Do not force the memory module into position. The memory
module should be completely inserted into the socket and level
when secured in place.
(Sample Illustration) Inserting the memory module into the slot
For this model, Slot A is the bottom slot. Slot B is the top slot. If only
one memory module is to be installed, it must be installed in Slot A.
12 Replace the memory module slot cover and secure it using the
screw.
latch
latch
Slot B
Slot A
NOTE
NOTE
NOTE
NOTENOTE
35
Getting Started
Adding memory (optional)
Always make sure your computer and AC adaptor have adequate
ventilation and are protected from overheating when the power is turned
on or when an AC adaptor is connected to a power outlet (even if your
computer is in Sleep mode). In this condition, observe the following:
❖ Never cover your computer or AC adaptor with any object.
❖ Never place your computer or AC adaptor near a heat source,
such as an electric blanket or heater.
❖ Never cover or block the air vents including those located on the
back of the computer.
❖ Always operate your computer on a hard flat surface.
Overheating your computer or AC adaptor could cause system
failure, computer or AC adaptor damage or a fire, possibly resulting
in serious injury.
13 Reconnect the cables.
14 Restart the computer.
TECHNICAL NOTE: You must have at least one memory module
installed for the computer to work.
You can now continue setting up the computer. When the operating
system has loaded, you can verify that the computer has recognized
the additional memory module.
If you are adding extra memory after setting up the computer, verify
that the computer has recognized it correctly as described in
“Checking total memory” on page 37.
Removing a memory module
If you need to remove a memory module:
1Complete steps 1 6– in “Installing a memory module” on
page 30 to shut down the computer and open the memory
module slot cover.
Do not try to remove a memory module with the computer turned on.
You can damage the computer and the memory module.
Do not remove the memory module while the computer is in Sleep or
Hibernation mode. The computer could hang up the next time you
turn it on and data in memory will be lost. In either of the above
cases, the Sleep configuration will not be saved.
36
Getting Started
Adding memory (optional)
The following screen may appear when you turn on the power:
If “Start Windows® Normally” is highlighted, then press Enter.
If one of the Safe Mode options is highlighted, it is best to press
Enter to go into Safe Mode, then shut down and restart the system, at
which time Windows® should boot back up normally.
When Safe Mode is suggested, this could be a sign that you may
need to scan your internal storage drive for errors or defragment the
drive. If so, consult Windows® Help and Support.
2Pull the latches away from the memory module.
The memory module pops up slightly.
If your system has the memory modules stacked on top of one
another, you must remove the top module first before
removing/installing the bottom module.
3Gently lift the memory module to a 30-degree angle and slide it
out of the slot.
(Sample Illustration) Removing the memory module
NOTE
NOTE
NOTE
NOTENOTE
NOTE
NOTE
NOTE
NOTENOTE
Slot B
Slot A
37
Getting Started
Adding memory (optional)
4Replace the memory module slot cover and secure it using the
screw.
Always make sure your computer and AC adaptor have adequate
ventilation and are protected from overheating when the power is turned
on or when an AC adaptor is connected to a power outlet (even if your
computer is in Sleep mode). In this condition, observe the following:
❖Never cover your computer or AC adaptor with any object.
❖Never place your computer or AC adaptor near a heat source,
such as an electric blanket or heater.
❖Never cover or block the air vents including those located on the
back of the computer.
❖Always operate your computer on a hard flat surface.
Overheating your computer or AC adaptor could cause system
failure, computer or AC adaptor damage or a fire, possibly resulting
in serious injury.
5Reconnect the cables.
6Restart the computer.
TECHNICAL NOTE: You must have at least one memory module
installed for the computer to work.
Checking total memory
When you add or remove a memory module, you can check that the
computer has recognized the change. To do this:
❖Click Start, Control Panel, System and Security, and then
System.
The System window appears. Installed memory (RAM) is
displayed below the System heading.
If the computer does not recognize the memory configuration, turn
off the computer and remove the memory module slot cover
(complete steps 1 6- in “Installing a memory module” on page 30),
and then check that the module is inserted completely into the
socket and lined up squarely with the socket latches.
38
Getting Started
Recovering the Internal Storage Drive
From time to time, Windows
® will display a pop-up that says, “Do
you want to allow the following program to make changes to this
computer?” This is a security feature to prevent programs or people
from doing things on your computer without your permission. If you
were trying to perform the action, click Continue; otherwise, click
Cancel. If unsure, cancel and try again.
Recovering the Internal Storage Drive
Your computer includes recovery utilities to allow you to recover
your internal storage drive if necessary.
The following internal storage drive recovery options are available:
Recovery option Description
Recover to out-of-box
state
This option restores the original factory image to your
internal storage drive, returning your computer to its
out-of-box state. (Recommended recovery method)
See “Recovering to out-of-box state (recommended
recovery method)” on page 39.
Recovery of factory
default software with
user’s data
This option recovers the factory default software, while
the computer attempts to back up all data from C:\Users.
See “Recovering of factory default software with user’s
data” on page 42.
Recover without
changing the internal
storage drive partitions
This option recovers just your C: drive, leaving any other
partitions you may have created (for example, a D: drive)
intact.
See “Recovering without changing the internal storage
drive partitions” on page 45.
Recover to a custom
size partition
This option allows you to specify a custom size for
the C: partition and then restores your C: drive to its
out-of-box state. Note: With this option, any changes you
made to the C: drive and any other drive partitions you
may have created are deleted.
See “Recovering to a custom size partition” on page 48.
NOTE
NOTE
NOTE
NOTENOTE
39
Getting Started
Recovering the Internal Storage Drive
A recovery image of your computer is stored on the internal storage
drive, and the image can be restored by running the recovery
utilities directly from your internal storage drive as described in the
sections below. However, it is strongly recommended that you
create recovery media. If the recovery files on your internal storage
drive become corrupted or are deleted, you can restore your system
from your recovery media. Also, if your original internal storage
drive fails, you can restore your system to a new internal storage
drive from your recovery media. It is strongly recommended that
you create recovery media before using your system for the first
time. See “Creating recovery media” on page 50 and “Restoring
from recovery media” on page 52.
❖The Toshiba Recovery Wizard also provides the option of
erasing your internal storage drive, without restoring the
information on the drive. See “Erasing the Internal Storage
Drive” on page 54 for more information.
❖When you restore your system, only the operating system files,
applications, and drivers originally shipped with the computer
are restored. Any files that you created are not restored during
this process. Be sure to separately save the files you have
created to external media using Windows
® Backup or another
backup program. For more information, see “Backing up your
work” on page 68.
Recovering to out-of-box state (recommended recovery method)
Recovering an internal storage drive to its out-of-box state deletes all
partitions on the drive and all information stored in those partitions.
Be sure to save your work to external media before executing the
recovery. For more information, see “Backing up your work” on
page 68.
You can recover the original factory image (returning the computer
to its out-of-box state) using the utilities stored on your computer’s
internal storage drive or using recovery media, if you have created
such media. To recover using the first method, follow the procedure
below. To recover using the second method, see “Restoring from
recovery media” on page 52.
NOTE
NOTE
NOTE
NOTENOTE
40
Getting Started
Recovering the Internal Storage Drive
To recover the original factory image using the utilities on your
computer’s internal storage drive:
1Make sure the computer is turned off.
2While powering on your computer, press the F12 key when the
initial TOSHIBA screen displays.
The boot menu appears.
3Using the arrow keys to scroll down, select the HDD
Recovery option, and then press the ENTER key.
4A warning screen appears, stating that when the recovery is
executed, all data will be deleted and rewritten unless the
“Recovery of Factory Default Software with user’s data”
option is selected in the next step. Click Yes to continue.
(Sample Image) Warning screen
41
Getting Started
Recovering the Internal Storage Drive
5When the Toshiba Recovery Wizard opens and the “Selecting
a process” screen displays, select Recovery of Factory
Default Software, and then click Next.
(Sample Image) Selecting a process screen
6The Recovery of Factory Default Software screen appears.
Select Recover to out-of-box state.
(Sample Image) Recovery of Factory Default Software screen
7Click Next.
A confirmation message displays reminding you that all data
will be lost during the recovery process. Be sure to save your
work to external media before proceeding (see “Backing up
your work” on page 68).
42
Getting Started
Recovering the Internal Storage Drive
8Click Next to begin the recovery.
When the recovery process is complete, a message displays
indicating that the internal storage drive has been recovered.
9Click Finish to restart the computer.
Recovering of factory default software with user’s data
Using “Recovery of Factory Default Software with user’s data”
recovers your internal storage drive to factory default state and
attempts to save C:\Users data to C:\Backup. Toshiba does not
guarantee successful data back-up. Please make a complete back up
of your data to external media before executing the recovery. For
more information, see “Backing up your work” on page 68.
You can recover the factory default software, while the computer
will attempt to back up all of the data from the C:\Users using the
utilities stored on your computer’s internal storage drive:
TECHNICAL NOTE: The data from C:\Users will be copied into the
C:\backup%current date% folder. The directory structure will be
retained, however all of the data will be moved to this folder during
the recovery process. As a result, any user can access the folders
under C:\backup%current date%. To return the data to your private
account, you will need to recreate a new account, and drag and drop
the data into your personal folders.
1Make sure the computer is turned off.
2While powering on your computer, press the F12 key when the
initial TOSHIBA screen displays.
The boot menu appears.
3Using the arrow keys to scroll down, select the HDD
Recovery option, and then press the ENTER key.
43
Getting Started
Recovering the Internal Storage Drive
4A warning screen appears, stating that when the recovery is
executed, all data will be deleted and rewritten unless the
“Recovery of Factory Default Software with user’s data”
option is selected in the next step. Click Yes to continue.
(Sample Image) Warning screen
5When the Toshiba Recovery Wizard opens and the “Selecting
a process” screen displays, select Recovery of Factory
Default Software with user’s data, and then click Next.
(Sample Image) Selecting a process screen
6A warning screen appears, stating the Toshiba Recovery
Wizard will “attempt” to save all data. There is a risk that the
Toshiba Recovery Wizard may not be able to save all data
during the recovery process.
44
Getting Started
Recovering the Internal Storage Drive
Toshiba does not guarantee successful data back up. Be sure to save
your work to external media before executing the recovery
(see “Backing up your work” on page 68).
7Click Yes to continue.
(Sample Image) Warning screen
8When the recovery process is complete, the Recovery of
Factory Default Software screen appears, indicating that the
recovery process is complete. Click Finish to restart the
computer.
(Sample Image) Recovery of Factory Default Software - Recovery complete
45
Getting Started
Recovering the Internal Storage Drive
Recovering without changing the internal storage drive partitions
Recovering without changing the internal storage drive partitions
deletes all information stored on the C: drive. Be sure to save your
work to external media before executing the recovery (see “Backing
up your work” on page 68). If you have created other partitions
(for example, a D: drive), those partitions will remain intact and any
information on them will not be affected.
You can recover the C: drive without affecting other partitions by
either using the utilities stored on your computer’s internal storage
drive or by using recovery media, if you have created such media.
To recover using the first method, follow the procedure below. To
recover using the second method, see “Restoring from recovery
media” on page 52.
To recover using the utilities on your computer’s internal storage
drive:
1Make sure the computer is turned off.
2While powering on your computer, press the F12 key when the
initial TOSHIBA screen displays.
The boot menu appears.
3Using the arrow keys to scroll down, select the HDD
Recovery option, and then press the ENTER key.
46
Getting Started
Recovering the Internal Storage Drive
4A warning screen appears, stating that when the recovery is
executed, all data will be deleted and rewritten unless the
“Recovery of Factory Default Software with user’s data”
option is selected in the next step. Click Yes to continue.
(Sample Image) Warning screen
5When the Toshiba Recovery Wizard opens and the “Selecting
a process” screen displays, select Recovery of Factory
Default Software, and then click Next.
(Sample Image) Selecting a process screen
47
Getting Started
Recovering the Internal Storage Drive
6The Recovery of Factory Default Software screen appears.
Select Recover without changing the hard drive partitions.
(Sample Image) Recovery of Factory Default Software screen
7Click Next.
A confirmation message displays reminding you that all data
on the C: drive will be lost during the recovery process. Be
sure to save your work to external media before proceeding
(see “Backing up your work” on page 68).
8Click Next to begin the recovery.
When the recovery process is complete, a message displays,
indicating that the C: drive has been recovered.
9Click Finish to restart the computer.
48
Getting Started
Recovering the Internal Storage Drive
Recovering to a custom size partition
Recovering to a custom size partition deletes all partitions on the
drive and all information stored in those partitions. Be sure to save
your work to external media before executing the recovery. For more
information, see “Backing up your work” on page 68.
The “Recover to a custom size partition” option restores your C:
drive to its out-of-box state, and allows you to specify the size for
the C: partition. You can resize and recover the C: drive using the
utilities stored on your computer’s internal storage drive or using
recovery media, if you have created such media. To recover using
the first method, follow the procedure below. To recover using the
second method, see “Restoring from recovery media” on page 52.
To resize and recover the C: drive using the utilities on your
computer’s internal storage drive:
1Make sure the computer is turned off.
2While powering on your computer, press the F12 key when the
initial TOSHIBA screen displays.
The boot menu appears.
3Using the arrow keys to scroll down, select the HDD
Recovery option, and then press the ENTER key.
4A warning screen appears, stating that when the recovery is
executed, all data will be deleted and rewritten unless the
“Recovery of Factory Default Software with user’s data”
option is selected in the next step. Click Yes to continue.
(Sample Image) Warning screen
49
Getting Started
Recovering the Internal Storage Drive
5When the Toshiba Recovery Wizard opens and the “Selecting
a process” screen displays, select Recovery of Factory
Default Software, and then click Next.
(Sample Image) Selecting a process screen
6The Recovery of Factory Default Software screen appears.
Select Recover to a custom size partition.
(Sample Image) Recovery of Factory Default Software screen
50
Getting Started
Recovering the Internal Storage Drive
7Use the on-screen arrow buttons in The size of drive C: field
to set the partition size.
8Click Next.
A confirmation message displays reminding you that all data
will be lost during the recovery process. Be sure to save your
work to external media before proceeding (see “Backing up
your work” on page 68).
9Click Next to begin the recovery.
When the recovery process is complete, a message displays
indicating that the C: drive has been recovered.
10 Click Finish to restart the computer.
Creating recovery media
It is strongly recommended that you create recovery media. If the
recovery files on your internal storage drive become corrupted or
are deleted, you can restore your system from your recovery media.
Also, if your original internal storage drive fails, you can restore
your system to a new internal storage drive from your recovery
media.
When you create recovery media, only the operating system files,
applications, and drivers originally shipped with the computer are
backed up to the external media and can be restored from this media.
Any files that you created are not backed up on the recovery media.
You will need to separately back up the files you created; for more
information, see “Backing up your work” on page 68.
When you create recovery media, the system will prompt you to
insert several blank DVDs or connect one or more USB flash drives
of a certain minimum capacity to your computer. The amount of
space required for storing the recovery files varies by computer
model. Follow the procedure below to determine how much space
you will need for storing your system’s recovery files.
NOTE
NOTE
NOTE
NOTENOTE
51
Getting Started
Recovering the Internal Storage Drive
To create recovery media:
1Click the Start button and, in the Search field, type Recovery
Media Creator. In the list that appears above, click on your
selection.
The TOSHIBA Recovery Media Creator dialog box displays.
(Sample Image) TOSHIBA Recovery Media Creator dialog box
2Select DVD or USB Flash from the drop-down list next to
“System Recovery Media,” depending on the type of external
media you want to use.
3Check the Information area of the dialog box to determine the
number of DVDs you will need and/or the minimum amount of
storage space required for copying your system’s recovery files
to USB flash drive(s).
4Do one of the following:
❖If you are copying files to DVD, insert a blank DVD into
the optical disc drive.
❖If you are copying files to a USB flash drive, connect a
USB flash drive of the required minimum capacity (as
specified in the TOSHIBA Recovery Media Creator
utility) to your computer.
All information stored on your DVDs or USB flash drive(s) will be
erased during the process of creating the recovery media. Be sure to
save the information stored on your external media to another
storage device before executing this procedure, or use blank media.
52
Getting Started
Recovering the Internal Storage Drive
5Click the Create button in the TOSHIBA Recovery Media
Creator utility dialog box.
6Follow the on-screen prompts to complete the copy process.
If you are copying the recovery files to DVDs, be sure to label each
DVD in the set sequentially (for example, “1 of 3,” “2 of 3,” etc.), so
that you will know in which order to insert the discs during recovery.
For information on using the Recovery media you have created with
the preceding steps, see “Restoring from recovery media” on
page 52.
Restoring from recovery media
The recovery process deletes information stored on the internal
storage drive. Be sure to save your work to external media before
executing the recovery (see “Backing up your work” on page 68).
If you have created recovery media for your system, you can restore
your system from such media, if necessary. For example, if your
original internal storage drive fails, you can restore your system to a
new internal storage drive from your recovery media. For
instructions on creating recovery media, see “Creating recovery
media” on page 50.
With recovery media, you can:
❖Recover to out-of-box state (recommended recovery method)
❖Recovery of factory default software with user’s data
❖Recover without changing the internal storage drive partitions
❖Recover to a custom size partition
For more information on these options, see “Recovering the
Internal Storage Drive” on page 38.
When you restore your system, only the operating system files,
applications, and drivers originally shipped with the computer are
restored. Any files that you created are not restored during this
process. Be sure to separately save the files you have created to
external media using Windows® Backup or another backup program.
For more information, see “Backing up your work” on page 68.
NOTE
NOTE
NOTE
NOTENOTE
NOTE
NOTE
NOTE
NOTENOTE
53
Getting Started
Recovering the Internal Storage Drive
To recover your internal storage drive from recovery media:
1Make sure your computer is turned off.
2Do one of the following:
❖If your recovery files are on DVDs, insert the first
recovery DVD into your optical disc drive.
❖If your recovery files are on a USB flash drive, connect the
USB flash drive to your computer.
3Turn on your computer. When the initial TOSHIBA screen
displays, press the F12 key on your keyboard.
The boot menu displays.
4Using the arrow keys, select the DVD option or the USB Flash
option, depending on which type of media you are using, and
then press the Enter key.
5A warning screen appears, stating that when the recovery is
executed all data on your internal storage drive will be deleted
and rewritten unless the “Recovery of Factory Default
Software with user’s data” option is selected. Click Yes to
continue.
6When the Toshiba Recovery Wizard opens and the “Selecting
a process” screen displays, select Recovery of Factory
Default Software, and then click Next.
7Select one of the following options:
❖Recover to out-of-box state (recommended recovery
method)—If you want to recover the original factory
image
❖Recover without changing the hard drive partitions—If
you want to recover the C: partition only, leaving other
partitions you have created intact
❖Recover to a custom size partition—If you want to
recover the C: drive to its out-of-box state and specify a
custom size for the C: drive. Note: This option deletes all
other partitions from the drive.
8Follow the on-screen instructions to complete the recovery
process.
When the recovery process is complete, a message displays
indicating that the drive has been recovered.
9Click Finish to restart the computer.
54
Getting Started
Erasing the Internal Storage Drive
Erasing the Internal Storage Drive
Erasing the internal storage drive will delete all data on the drive,
including the partitions. Be sure to create recovery media and back
up your data to external media before erasing the internal storage
drive.
If you want to restore the internal storage drive, use one of the
recovery options instead of erasing the drive. For more information,
see “Recovering the Internal Storage Drive” on page 38.
To delete all data and partitions from the internal storage drive:
1Access the Toshiba Recovery Wizard on your internal storage
drive or on your recovery media.
❖To access the Recovery Wizard on your internal
storage drive: While powering on your computer, press
the F12 key when the initial TOSHIBA screen displays.
The boot menu appears. Using the arrow keys to scroll
down, select the HDD Recovery option, and then press
the ENTER key. Read the Warning screen that displays, and
then click Ye s to continue.
❖To access the Recovery Wizard on your recovery
media: Turn off your computer. Insert the first recovery
DVD into your optical disc drive or connect the USB flash
drive containing your recovery files to your computer, and
then power on the computer. When the initial TOSHIBA
screen displays, press
F12. Using the arrow keys, select the
DVD or USB Flash option on the boot menu, depending
on which type of media you are using, and then press
Enter.
Select Toshiba Recovery Wizard, and then click Next.
2Select Erase the hard disk, and then click Next.
3Choose one of the following options on the Erase the hard disk
screen:
❖Delete all data and partitions from the hard disk—This
option deletes all of the data on the internal storage drive
without overwriting the drive.
❖Delete all partitions and overwrite all sectors on the
hard disk—This option deletes all data and then
overwrites the entire internal storage drive for security
NOTE
NOTE
NOTE
NOTENOTE
55
Getting Started
Erasing the Internal Storage Drive
purposes. This process may take several hours, depending
on the size of your internal storage drive.
(Sample Image) Erase the hard disk screen
4Click Next.
A confirmation message displays reminding you that all data
on the internal storage drive will be lost. Be sure you have
saved your work to external media (see “Backing up your
work” on page 68) and created recovery media (see “Creating
recovery media” on page 50) before proceeding.
5Click Next to begin erasing the internal storage drive.
When the recovery process is complete, a message displays,
indicating that the internal storage drive has been erased.
6Click Finish to restart the computer.
56
Getting Started
Checking the internal storage drive operating status
Checking the internal storage drive operating status
After restoring your internal storage drive, you can check its status
as follows:
1Click Start button and, in the Search field, type Computer
Management. In the list that appears above, click on your
selection.
2Click Disk Management.
Installing drivers and applications
The TOSHIBA Application Installer allows you to reinstall the
drivers and applications that were originally bundled with your
computer.
To reinstall drivers and applications:
1Click the Start button and, in the Search field, type TOSHIBA
Application Installer. In the list that appears above, click on
your selection.
2Click Next.
3Click the item you want to install.
4Click Install.
5Follow the on-screen prompts to complete the installation
process.
Connecting an external device
You can easily attach an external device your computer.
To do this:
1Read the directions that came with the device to see if you first
need to install new software.
2Connect the device’s video or USB cable to the port on the
computer and to the device.
3Connect the device’s power cable to a live electrical outlet (if
applicable).
4Turn on the external device (if applicable).
Your computer may automatically detect the external device.
57
Getting Started
Using external display devices
Using external display devices
Your computer comes with a built-in display, but you can also
connect the following types of external display devices to the video
ports described below:
Using the HDMI™ In port
Your computer comes with an HDMI™ In port, allowing you to
connect to a video gaming console or DVD player.
Locate the HDMI™ In port on the Quick Start Card that shipped with
your computer.
(Sample Illustration) Video ports on back of computer
NOTE
NOTE
NOTE
NOTENOTE
HDMI™ In port
59
Getting Started
Caring for your computer
Using a computer lock
You may want to secure your computer to a heavy object such as
your desk. The easiest way to do this is to purchase an optional
computer lock cable. For more information on purchasing a cable
lock, visit accessories.toshiba.com.
(Sample Illustration) Computer lock cable
To secure the computer:
1Wrap the cable through or around some part of a heavy object.
Make sure there is no way for a potential thief to slip the cable
off the object.
2Pass the locking end through the loop.
3Insert the cable’s locking end into the security lock slot on your
computer, then engage the locking device.
The computer is now securely locked.
(Sample Illustration) Attaching security lock cable
60
Chapter 2
Learning the Basics
This chapter gives some computing tips and provides important
information about basic features.
Computing tips
❖Save your work frequently.
Your work stays in the computer’s temporary memory until
you save it to the internal storage drive. If the network you are
using goes down and you must restart your computer to
reconnect, you will lose all work since you last saved.
See “Saving your work” on page 67 for further information.
HINT: Some programs have an automatic save feature that can be
activated. This feature saves your file to the internal storage drive at
preset intervals. See your software documentation for details.
❖Back up your files to external media on a regular basis. Label
the backup copies clearly and store them in a safe place.
It is easy to put off backing up because it takes time. However,
if your internal storage drive suddenly fails, you will lose all
the data on it unless you have a separate backup copy. For more
information, see “Data and system configuration backup in the
Windows® operating system” on page 124.
66
Learning the Basics
Starting a program
Starting a program
The easiest way to start a program is to double-click the name of
the file that contains the information you want to work on. To find
the file, use the Start menu or Windows® Explorer.
If you prefer to open the program first, you have three options. You
can:
❖Use the Search programs and files field in the Start menu
❖Double-click the icon for the program on your desktop
❖Use the Start menu
The next two sections explain how to start a program from the Start
menu, and the Search programs and files field.
Starting a program using the Search programs and files field
This example uses the Start menu’s Search programs and files field
to start WordPad:
1Click Start to display the Start menu.
The Search programs and files field appears at the bottom of
the Start menu.
(Sample Image) Search programs and files field in Start menu
2Start typing the program’s name (wordpad) in the Search
programs and files field.
As you type, all matching files and programs are displayed in a
separate window.
3In the search results window, click WordPad under Programs.
Search programs
and files field
67
Learning the Basics
Saving your work
Starting a program from the Start menu
When you install a program, the operating system usually puts an
icon in the All Programs menu. To start a program that has an icon
in the All Programs menu, follow these steps, which use the
Windows® WordPad program as an example:
1Click Start, and then All .Programs
The Windows® operating system displays the All Programs
menu, which lists programs and program groups. If your
program is listed, go to step 3, otherwise, continue with step 2.
If you pause with your mouse on All Programs, it will open it up. You
may need to scroll up or down to see the complete list.
2Click the program group, in this example, Accessories.
The Accessories menu is displayed.
3Click the program, in this example, WordPad.
WordPad opens.
To close the program, click the Close button in the upper-right
corner of the program’s window.
Saving your work
Before you turn off the computer using the Shut down command,
save your work on the internal storage drive, external media, flash
media, or optical disc. This is one of the most important rules of
computing.
When you turn off the computer using the Sleep or Hibernate
commands, your work should be there when you resume.
Many programs offer a feature that saves documents at regular
intervals. Check your program’s documentation to see if it has an
automatic save feature.
NOTE
NOTE
NOTE
NOTENOTE
69
Learning the Basics
Using the optical disc drive
Using the optical disc drive
Optical storage is a popular medium for software, music, and video.
Digital versatile discs or Blu-ray™ Discs provide a significant
increase in data storage and support features that were not available
on previous video platforms. These features include wide-screen
movies, multiple language tracks, digital surround sound, multiple
camera angles, and interactive menus.
TECHNICAL NOTE: Your optical disc drive is set to play region 1
(North America) for DVD-ROMs or BD-ROMs, depending on the typ
of drive. If you play a DVD or Blu-ray Disc™ from another region, th
drive will automatically change to play in the format of the other
region. The drive will allow you to change regions four times. On the
fourth change, the region will be “locked in.” That is, the drive will
only play DVDs and Blu-ray™ Discs from that last region. Note that
changing from region 1 to region 2 and back to region 1 is counted
as two changes.
When viewing DVD and Blu-ray Disc™ movies use the DVD or
Blu-ray Disc™ player software that came with your computer.
Viewing Blu-ray Disc™ movies
Your system may come with a Blu-ray Disc™ drive. Due to
differences between High Definition and previous viewing
capabilities, consider the following:
❖Some Blu-ray Disc™ movies have online content that can be
accessed from the disc. To view this content, your computer
must be connected to the Internet.
(Sample Image) Sound properties window
NOTE
NOTE
NOTE
NOTENOTE
72
Learning the Basics
Using the optical disc drive
Handle DVDs, Blu-ray™ Discs and CDs carefully, making contact
only with the center hole and edge. Do not touch the surface of the
disc. Do not stack discs. If you incorrectly handle the discs, you
could lose data.
8Make sure the disc is completely on the spindle and is lying flat
on the tray.
If you insert the disc incorrectly, it may jam the drive. If this happens,
contact Toshiba support for assistance.
9Push the disc tray in by pressing gently on the center of the tray
until it clicks into place.
You are ready to use the disc.
Playing an audio CD
Insert an audio CD and close the disc tray.
If the computer is turned on, the default player opens.
❖To play the CD or to pause, click the Play/pause button.
❖To stop the CD, click the Stop button.
Before putting on headphones to listen, turn the volume down. Do
not set the volume too high when using headphones. Continuous
exposure to loud sound can harm your hearing.
Playing optical media
If you insert an optical disc into the optical disc drive and the
Auto-Run feature does not automatically start your disc, try
launching the optical disc manually. To do this, follow these steps:
1Click Start, and then Computer.
2Double-click the optical disc drive icon.
The drive will run the optical disc.
If your disc does not run using this method, try using an application
that is associated with the media on the disc. For example, if it is a
music CD, open Windows Media® Player and use it to select and
then play the CD. For other types of media, use the associated
software to open the files on the disc.
73
Learning the Basics
Using the optical disc drive
Recording optical media
Depending on the configuration, your computer may come with an
optical disc drive that allows you to:
❖Play pre-recorded and recorded optical media.
❖Read/write data and multi-media files to recordable optical
media.
For more information regarding supported optical media formats
please refer to your computer’s detailed specifications at
support.toshiba.com.
Due to manufacturing and quality variations in third party optical
media (e.g., CD or DVD) or optical media players/recorders, in
certain cases, your Toshiba optical disc drive may not record on
certain optical media that bear the applicable logo, or play back
optical media recorded by other computers or optical media
recorders. Additionally, certain optical media recorded on your
optical disc drive may not play back or operate properly on other
computers or optical media players. These problems are not due to
any defect in your Toshiba computer or optical disc drive. Please
refer to your computer's product specification for listing of specific
format compatibilities.
Copy protection technology may also prevent or limit recording or
viewing of certain optical media.
For details on how to use the software, please refer to the respective
Online Help menus.
Removing a disc with the computer on
To remove an optical disc with the computer turned on:
1Press the eject button on the drive.
Do not press the eject button while the drive in-use indicator light is
glowing. Doing so could damage the disc or the drive.
Also, if the disc is still spinning when you open the disc tray, wait for
it to stop spinning before you remove it.
2Pull the tray out until it is fully open, remove the disc, and
place it in its protective cover.
3Gently press the tray in to close it.
NOTE
NOTE
NOTE
NOTENOTE
74
Learning the Basics
Toshiba’s online resources
Removing a disc with the computer off
To remove a disc with the computer turned off:
1Insert a slender object, such as a straightened paper clip, into
the manual eject hole.
The disc tray slides partially out of the drive.
Never use a pencil to press the manual eject button. Pencil lead can
break off inside the computer and damage it.
2Pull the tray out until it is fully open, remove the disc, and
place it in its protective cover.
3Gently press the tray in to close it.
Toshiba’s online resources
Toshiba maintains a number of online sites to which you can
connect. These sites provide information about Toshiba products,
give help with technical questions and keep you up to date with
future upgrades. For more information, see “Contacting Toshiba”
on page 129.
75
Chapter 3
Computing
Toshiba’s energy-saver design
Your computer enters a low-power suspension mode when it is not
being used, thereby conserving energy and saving money in the
process. It has a number of other features that enhance its energy
efficiency.
Many of these energy-saving features have been preset by Toshiba.
We recommend you leave these features active, allowing your
computer to operate at its maximum energy efficiency, so that you
can use it for longer periods.
Power management
Your computer ships with the power management options preset
to a configuration that will provide the most stable operating
environment and optimum system performance.
Changes to these settings may result in system performance or
stability issues. Users who are not completely familiar with the power
management component of the system should use the preset
configuration. For assistance with setup changes, contact Toshiba’s
Customer Support Center.
77
Computing
Power Plans
The Windows® Power Options window appears.
(Sample Image) Windows
® Power Options window
2Select an appropriate plan for your work environment or create
your own custom plan.
3Click Create a power plan in the left pane to set up a new
plan.
To edit a plan or to edit advanced settings, continue to the following
steps.
4Click Change plan settings to choose the plan you want to
edit.
This screen allows you to change basic settings.
5Click Change advanced power settings to access settings for
internal storage drive power save time, etc.
You can click on the plus signs to expand each item and to see
what settings are available for each item.
6Click OK to save the plan changes you have performed.
By default the two power plans eco and Balanced are satisfactory
for most people and do not need to be edited.
NOTE
NOTE
NOTE
NOTENOTE
83
Exploring Your Computer’s Features
Exploring audio features
For information on how to set up a wireless connection, refer to
your wireless networking device documentation or your network
administrator.
To enable or disable wireless communication, press F12. For more
information see “Hot Keys/TOSHIBA Cards” on page 131.
For help with common Wi-Fi® networking problems, see “Wireless
networking problems” on page 121.
Connecting your computer to a network
You can connect your computer to a network to increase its
capabilities and functionality using one of its communication ports.
Accessing a network
To access a network, connect an Ethernet cable to the Network port
(RJ45) on your computer. For specific information about
connecting to the network, consult your network administrator.
Many hotels, airports, and offices offer Wi-Fi® access. If your
computer has Wi-Fi®, ask for help when connecting to a Wi-Fi ®
network.
Exploring audio features
You can use your computer to record sounds using the computer’s
internal microphone (available on certain models) or an optional
external microphone. You can listen to sound files or audio CDs
using the built-in speakers, headphones, or external speakers.
Recording sounds
You may record sounds using the computer’s internal microphone
(available on certain models) or by connecting an optional external
microphone.
NOTE
NOTE
NOTE
NOTENOTE
90
Utilities
TOSHIBA Assist
❖TOSHIBA Accessibility
❖TOSHIBA eco Utility™
❖TOSHIBA Service Station
❖TOSHIBA PC Health Monitor
TOSHIBA Assist
The TOSHIBA Assist provides quick access to computer functions
and allows you to customize a range of computer settings.
To access TOSHIBA Assist, click the Start button and, in the
Search field, type TOSHIBA Assist. In the list that appears above,
click on your selection.
The TOSHIBA Assist window appears.
(Sample Image) TOSHIBA Assist window
The TOSHIBA Assist offers four categories of options:
❖Connect
❖Secure
❖Protect & Fix
❖Optimize
Especificaciones del producto
| Marca: | Toshiba |
| Categoría: | De oficina |
| Modelo: | LX835 |
| Color del producto: | Meerkleurig |
| Peso del embalaje: | - g |
| Empaquetadura en profundidad: | - mm |
| Altura del embalaje: | - mm |
| Edad recomendada (mín.): | 4 jaar |
| Certificados de sostenibilidad: | Forest Stewardship Council (FSC) Mix |
| Género propuesto: | Jongen/meisje |
| Numero de piezas: | 1000 stuk(s) |
| Tipo-producto: | Bouwpakket |
| Advertencia de TSD de la UE: | Niet geschikt voor kinderen onder de 36 maanden |
¿Necesitas ayuda?
Si necesitas ayuda con Toshiba LX835 haz una pregunta a continuación y otros usuarios te responderán
De oficina Toshiba Manuales
21 Agosto 2024
30 Julio 2024
De oficina Manuales
- De oficina Sony
- De oficina Samsung
- De oficina HP
- De oficina Medion
- De oficina VTech
- De oficina Acer
- De oficina Alienware
- De oficina Apple
- De oficina Sharp
- De oficina Jysk
- De oficina Emachines
- De oficina Asus
- De oficina Parisot
- De oficina Trekstor
- De oficina LC-Power
- De oficina Sharkoon
- De oficina Lenovo
- De oficina ZOTAC
- De oficina Tripp Lite
- De oficina Optoma
- De oficina Axis
- De oficina Gigabyte
- De oficina BDI
- De oficina Haier
- De oficina Fujitsu
- De oficina Asrock
- De oficina Razer
- De oficina Mio
- De oficina Supermicro
- De oficina Wehkamp
- De oficina Dell
- De oficina InFocus
- De oficina Planar
- De oficina Intel
- De oficina MSI
- De oficina Targa
- De oficina Viewsonic
- De oficina Peaq
- De oficina Seagate
- De oficina Shuttle
- De oficina ECS
- De oficina Vorago
- De oficina Promethean
- De oficina Foxconn
- De oficina Ibm
- De oficina Packard Bell
- De oficina Moxa
- De oficina Advantech
- De oficina ELO
- De oficina Kogan
- De oficina MP
- De oficina Elitegroup
- De oficina Smart Things
- De oficina ONYX
- De oficina System76
- De oficina Kramer
- De oficina Zoostorm
- De oficina Bestar
- De oficina Pelco
- De oficina Cybernet
- De oficina Altra
- De oficina Dell Wyse
- De oficina AOpen
- De oficina NComputing
- De oficina MvixUSA
- De oficina Faytech
- De oficina AIS
- De oficina Wyse
Últimos De oficina Manuales
27 Octubre 2024
27 Octubre 2024
27 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
19 Octubre 2024
17 Octubre 2024