TP Link Tapo T310 Manual de Usario

TP Link humidificador Tapo T310

Lee a continuación 📖 el manual en español para TP Link Tapo T310 (4 páginas) en la categoría humidificador. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

Meet Your Temperature and Humidity Sensor

Measure the temperature and humidity of the environment and send you instant

notications when the environment changes. It is suitable for green houses, bedrooms,

nursery, incubators, and wine cellars.

Quick Start Guide

Smart Temperature and

Humidity Sensor

7106509722 REV1.0.0

*Images may dier from actual products.

Open the Tapo app and tap the button.

Select and then your model. Sensors

Follow the app instructions to complete

setup.

2. Set Up Your SensorBefore You Start

A Tapo Hub is required. Make sure your

Tapo Hub is successfully added via the

Tapo app.

Remove the battery insulation tab to power

up your sensor. The LED should blink.

Note: If the LED is not blinking, use a pin to press the Reset

button for 5 seconds to reset your sensor and enter pairing

mode.

1. Power Up Your Sensor1

Take your sensor to the preferred location.

Option 1

Single press the Reset button. Your hub

should make a voice prompt.

3. Test Your Sensor3

Option 2

Blow on the sensor detector. The

temperature and humidity displayed on

the Tapo app should change.

Reset

Sensor

Detector

LED

Battery Pinhole

Use a pin to press and

remove the cover

Reset Button

Single press: Eective range test

Press for 5s: Reset and enter

pairing mode

CR2450

4. Place Your Sensor44. How to replace the battery?

Option 1: Hang with the Lanyard

a. Stick the included adhesive magnets to

the back panel.

b. Magnetically attach the sensor to metallic

surfaces.

b. Stick the sensor to your preferred location.

Option 2: Use Adhesive Magnets

a. Stick the included 3M adhesives to the

back panel.

Option 3: Use 3M Adhesives

Metallic Surface

Need some help?

Visit www.tapo.com/support/

for technical support, user guides,

FAQs, warranty & more

Do not ingest battery, Chemical Burn Hazard

Avoid replacement of a battery with an incorrect type that can defeat a

safeguard.

Avoid disposal of a battery into re or a hot oven, or mechanically crushing

or cutting of a battery, that can result in an explosion.

Do not leave a battery in an extremely high temperature surrounding

environment that can result in an explosion or the leakage of ammable

liquid or gas; Do not leave a battery subjected to extremely low air

pressure that may result in an explosion or the leakage of ammable liquid

or gas.

Safety Information

Keep the device away from water, re, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device. If you need

service, please contact us.

Do not use the device where wireless devices are not allowed.

Please read and follow the above safety information when operating the

device. We cannot guarantee that no accidents or damage will occur due

to improper use of the device. Please use this product with care and

operate at your own risk.

TP-Link hereby declares that the device is in compliance with the essential

requirements and other relevant provisions of directives 2014/53/EU,

2009/125/EC, 2011/65/EU and (EU) 2015/863.

The original EU declaration of conformity may be found at

https://www.tapo.com/en/support/ce/

TP-Link hereby declares that the device is in compliance with the essential

requirements and other relevant provisions of the Radio Equipment

Regulations 2017.

The original UK declaration of conformity may be found at

https://www.tapo.com/support/ukca/

For EU/UK Region:

Operating Frequency / Nominal Operating Frequency / Max Output Power:

863~865MHz / 863.35MHz / 25mW (e.r.p)

863~865MHz / 864.35MHz / 25mW (e.r.p)

1. Use a pin to press and remove the cover.

2. Replace the battery with a fresh cell.

3. Put the cover back.

CR2450

(The installation height should not be higher than 2 meters.)

This product contains a coin / button cell battery. If the coin / button

cell battery is swallowed, it can cause severe internal burns in just 2

hours and can lead to death.

Keep new and used batteries away from children.

If the battery compartment does not close securely, stop using the

product and keep it away from children.

If you think batteries might have been swallowed or placed inside

any part of the body, seek immediate medical attention.

Warning

Risk of explosion if the battery is replaced by an incorrect type.

Warning

Especificaciones del producto

Marca:	TP Link
Categoría:	humidificador
Modelo:	Tapo T310
Número de núcleos de procesador:	2
Adaptador gráfico:	HD Graphics
red LAN:	Ja
Resolución Máxima:	2560 x 1600 Pixels
Tipo de fuente de energía:	ATX
Cables suministrados:	SATA
Número de puertos USB 2.0:	2
Puerto(s) VGA (D-Sub):	1
Número de puertos HDMI:	1
Número de puertos Ethernet LAN (RJ-45):	1
Certificación:	FCC, CE, WHQL, ErP/EuP ready (ErP/EuP ready power supply is required)
HDCP:	Ja
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	2
Zócalo del procesador:	NA (geïntegreerde CPU)
Fabricante del procesador:	Intel
Memoria interna máxima:	16 GB
Tecnología de respuesta inteligente Intel®:	Nee
Tecnología Intel® Hyper Threading (tecnología Intel® HT):	Nee
Tecnología Intel® Turbo Boost:	Nee
Tecnología de vídeo Intel® Quick Sync:	Ja
Tecnología Intel® InTru™ 3D:	Nee
Tecnología Intel® Clear Video HD (Intel® CVT HD):	Ja
Intel® Insider™:	Nee
Nuevas instrucciones Intel® AES (Intel® AES-NI):	Ja
Ejecutar bit de desactivación:	Ja
Tecnologías de monitoreo térmico:	Ja
Intel® VT-x con tablas de páginas extendidas (EPT):	Ja
Ventaja Intel® para pequeñas empresas (Intel® SBA):	Nee
Clave segura Intel®:	Ja
Intel® 64:	Ja
Protección del sistema operativo Intel®:	Nee
Tecnología de virtualización Intel® para E/S dirigida (VT-d):	Nee
Tecnología Intel® Clear Video:	Ja
Tecnología de virtualización Intel® (VT-x):	Ja
Tecnología Intel® de protección de identidad (Intel® IPT):	Ja
Tecnología de ejecución confiable Intel®:	Nee
Programa de plataforma de imagen estable Intel® (SIPP):	Nee
Tecnología antirrobo Intel® (Intel® AT):	Nee
Canales de salida de audio:	7.1 kanalen
Compatible con Linux:	Ja
Tipo de interfaz Ethernet:	Gigabit Ethernet
Tipo de ranura de memoria:	SO-DIMM
Elegibilidad para la plataforma Intel® vPro™:	Nee
chip de audio:	Realtek ALC887
Familia de adaptadores gráficos:	Intel
Tecnología de almacenamiento rápido Intel®:	Nee
Canal de memoria:	Dubbelkanaals
Interfaces de unidad de almacenamiento compatibles:	SATA III
Puerto(s) PS/2:	2
Puertos seriales):	1
Audio de alta definición Intel® (Audio Intel® HD):	Ja
Tecnología de virtualización Intel® (Intel® VT):	VT-x
Componente para:	PC
Controlador LAN:	Realtek RTL8111GR
Versión de DirectX:	11.1
Número de conectores SATA III:	2
No ECC:	Ja
Activación de la LAN:	Ja
Puerto(s) paralelo(s):	1
Tipos de memoria soportados:	DDR3-SDRAM, DDR3L-SDRAM
Ranuras PCI Express x1 (Gen 2.x):	1
Familia de chipsets de placa base:	Intel
Factor de forma de la placa base:	mini ITX
Número de ranuras de memoria:	2
Velocidades de reloj de memoria admitidas:	1066,1600 MHz
tipo de BIOS:	UEFI AMI
Tamaño de la memoria del BIOS:	64 Mbit
Versión ACPI:	5.0
Conexiones COM:	1
Conexión para refrigerador de CPU:	Ja
Conexiones para ventiladores de caja:	1
Conector de alimentación ATX (24 pines):	Ja
Conexiones USB 2.0:	2
Conexión para panel de audio en el frente:	Ja
Memoria sin búfer:	Ja
Conexiones USB 3.2 Gen 1 (3.1 Gen 1):	1
Conector TPM:	Ja
Conexión de intrusión al chasis:	Ja
Soporte de gráficos discretos:	Ja