TP Link TL-SG1210P Manual de Usario

TP Link Cambiar TL-SG1210P

Lee a continuación 📖 el manual en español para TP Link TL-SG1210P (6 páginas) en la categoría Cambiar. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
Connection
© 2020 TP-Link 7106508569 REV3.1.0
Installation Guide
Gigabit Desktop Switch with PoE/PoE+
LED Explanation
Power
On: Power on
O: Power o
Link/Act (For TL-SG1008P)
On: A device is linked to the correspoding
port and running properly.
Flashing: Transmitting or receiving data.
O: No device is linked to the
corresponding port.
Link/Act, Uplink 1, Uplink 2 (For TL-SG1210P)
Green On: Running at 1000 Mbps, but no activity.
Green Flashing: Running at 1000 Mbps and is
transmitting or receiving data.
Yellow On: Running at 10/100 Mbps, but no activity.
Yellow Flashing: Running at 10/100 Mbps and is
transmitting or receiving data.
O: No device is linked to the corresponding port.
Package Contents: Switch, Power Adapter, Power Cord and Installation Guide.
On: Providing PoE power
Flashing: PoE fault
O: Not providing PoE power
PoE Status
On: Running at 1000 Mbps.
O: Running at 10/100 Mbps or no device
is linked to the corresponding port.
1000Mbps (For TL-SG1008P)
PoE MAX
For TL-SG1008P:
On: 48 WTotal power supply < 55 W
Flashing: Total power supply 55 W
O: Total power supply < 48 W
For TL-SG1210P:
On: 56 WTotal power supply < 63 W
Flashing: Total power supply 63 W
O: Total power supply < 56 W
Note: For simplicity, we will take TL-SG1008P for example throughout the Guide.
PC
IP Camera AP
Ethernet Ports (1-8)
PoE Ports (1-4)
IP Phone
PoE Devices
Router
LAN PortWAN Port
Internet
DC P er Adapterow
AC Power Cord
Note:
PoE/PoE+ ports typically connect to PoE Devices. Besides, PoE/PoE+ ports can also connect to non-PoE devices, but only transmit data.
TL-SG1210P has two uplink ports, which typically connect to uplink devices like routers.
Uplink 1 is an SFP port and works with a 1000 Mbps SFP module. Uplink 2 is an RJ45 port.
For TL-SG1008P, maximum PoE power is 15.4 W for each PoE port and 55 W for all PoE ports in total.
For TL-SG1210P, maximum PoE power is 30 W for each PoE port and 63 W for all PoE ports in total.
1.
2.
3.
4. PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guranteed and will vary as a result of client
limitations and environmental factors.
Frequently Asked Questions (FAQ)
The Power LED should be lit when the power system is working normally.
If the Power LED is not lit, please try the following:
A1:
Make sure the AC power cord is connected to the switch with power
source properly.
A2:
Make sure the voltage of the power supply meets the requirements
of the input voltage of the switch.
A3: Make sure the power source is ON.
Q1. Why is the Power LED not lit?
Please try the following:
A1:
Make sure that the cable connectors are rmly plugged into the
switch and the device.
A2
:
Make sure the connected device is turned on and works normally.
A3
:
The cable must be less than 100 meters long (328 feet).
Q2. Why is the Link/Act LED not lit while a device is
connected to the corresponding port?
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
0 C to 40 C (32 F to 104˚ ˚ ˚ ˚F)
-40 C to 70 C (-40 F to 158˚ ˚ ˚ ˚F)
10% to 90%RH non-condensing
5% to 90%RH non-condensing
Environmental and Physical Specications
IEEE 802.3i, 802.3u, 802.3ab, 802.3x, 802.3af, 802.1p
For TL-SG1210P: IEEE 802.3z, 802.3at
CSMA/CD
For TL-SG1008P:
8 10/100/1000 Mbps RJ45 Ports, Auto-Negotiation
MDI/MDIX;
PoE Ports: Port 1-Port 4, Total Power Supply: 55 W
For TL-SG1210P:
9 10/100/1000 Mbps RJ45 Ports, Auto-Negotiation
MDI/MDIX; 1 1000 Mbps SFP port;
PoE Ports: Port 1-Port 8, Total Power Supply: 63 W
10BASE-T: UTP category 3, 4, 5 cable (maximum 100 m);
EIA/TIA-568 100 Ω STP (maximum 100 m)
100BASE-TX: UTP category 5, 5e cable (maximum 100 m);
EIA/TIA-568 100 Ω STP (maximum 100 m)
1000BASE-T: UTP category 5e cable or above (maximum
100 m); EIA/TIA-568 100 Ω STP (maximum 100 m)
1000BASE-SX/LX/LX10/BX10: MMF, SMF (For
TL-SG1210P)
For TL-SG1008P: 16 Gbps
For TL-SG1210P: 20 Gbps
4K
Store-and-Forward
Automatically learning, automatically aging
External Power Adapter
Input: 100-240 V AC, 50/60 Hz
Output:
For TL-SG1008P: 48 V DC/1.25 A
For TL-SG1210P: 53.5 V DC/1.31 A
Standard
General Specications
Specications
Q3. Why is PoE/PoE+ ports not supplying power for PoE devices?
If total power consumption of connected PoE devices exceeds the maximum, the
system will cut o the power to ports with the lowest PoE priority. A PoE port with
a smaller index number has a higher PoE priority. Let’s take TL-SG1008P as an
example. If port 1, 2 and 4 are consuming 15.4 W respectively, and an additional
PoE device with 12 W is connected to port 3, the total power consumption
exceeds 55 W, so the system will cut o the power to port 4.
Power Supply
MAC Address Learning
Transfer Method
MAC Address Table
Backbone Bandwidth
Network Media (Cable)
Interface
Protocol
For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code.
If you have any suggestions or needs on the product guides,
welcome to email techwriter@tp-link.com.cn.
To ask questions, find answers, and communicate with TP-Link
users or engineers, please visit https://community.tp-link.com
to join TP-Link Community.
Wall Mountable For TL-SG1008P: No
For TL-SG1210P: Yes
Distance Between
Mounting Holes For TL-SG1210P: 150 mm

Especificaciones del producto

Marca: TP Link
Categoría: Cambiar
Modelo: TL-SG1210P

¿Necesitas ayuda?

Si necesitas ayuda con TP Link TL-SG1210P haz una pregunta a continuación y otros usuarios te responderán




Cambiar TP Link Manuales

Cambiar Manuales

Últimos Cambiar Manuales