Tripp Lite SmartRack SRCOOL18K Manual de Usario

Tripp Lite aire acondicionado SmartRack SRCOOL18K

Lee a continuación 📖 el manual en español para Tripp Lite SmartRack SRCOOL18K (40 páginas) en la categoría aire acondicionado. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/40

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $50 value!

www.tripplite.com/warranty

Portable Air Conditioning Unit

SRCOOL18K, SRCOOL24K

(208/240V, 60 Hz)

Owner’s Manual

Introduction 2

Important Safety Instructions 2

Unpacking 3

Features 4

Installation 5

Operation 10

Maintenance 11

Troubleshooting 11

Storage and Service 13

Warranty and Product Registration 13

Español 14

Français 27

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

SYSTRPS

STA TDUPLXSP E E D

MODE

15X

MAST R

STA C K

SYSTRPS

STA TDUPLX

SPEED

MODE

15X

31X33X

MAST R

STA C K

SYSTRPSSTAT

DUP L XSPEE D

MODE

15X

1X33X

MAST R

STA C K

47X

SYSTRPS

STATD U P LX

SPEED

MODE

15X

MASTR

STACK

SYSTRPS

STATD U P L XSPE E D

MODE

15X

31X33X

MASTR

STACK

SYSTRPS

STATD U P L XSPE E D

MODE

15X 31X33

MASTR

STACK

47X

SYST

RPS

SYSTRPS

STATDUPLXSPEE D

MODE

15X

MAST R

STAC K

SYSTRPS

STATDUPLXSPEE D

MODE

15X 31X33X

MAST R

STAC K

SYST

RPSSTAT

DUPL XSPE E D

MODE

15X

X33X

MAST R

STAC K

47X

SRCOOL18K SRCOOL24K SRCOOL18K SRCOOL24K

Introduction

The self-contained Portable Air Conditioning Unit provides 18,000 or 24,000 BTUs of supplemental cooling capacity. Designed for IT

environments, it’s ideal for cooling overheated rack enclosures, IT equipment hot spots and network closets without access to facility air

conditioning. The Portable Air Conditioning Unit can focus cool air through its ﬂexible cooling duct or cool a small room through its louvered vent.

The SRCOOL24K’s cooling output feature allows cool air to be split between two racks. It also ﬁlters and dehumidiﬁes air to improve operating

conditions and equipment reliability. Condensate is re-evaporated for drip-free operation, so you won’t waste time emptying water collection

tanks. The self-contained design does not require any plumbing or special circuits, so setup is quick and easy. Eco-friendly R410A refrigerant

meets environmental standards worldwide.

Recommended Applications:

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during the installation, operation

and storage of this product. Failure to heed these warnings may affect your warranty.

Warnings

• The individual user should determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual

applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or ﬁtness of this device

for any speciﬁc application.

• Install the unit indoors, away from extreme temperatures or humidity, direct sunlight, dust and conductive contaminants.

• Leave adequate space around the unit for ventilation, with rear and vented sides not less than 20 inches (51 cm) from walls or other

obstacles.

• Install the unit on a ﬂat surface with a gradient no more than 10°.

• Connect the unit directly to a grounded AC power outlet. Failure to do so may cause an electric shock or ﬁre.

• This unit is designed to supply supplemental cooling for localized hot spots. It is not intended for continuous use.

• The power supply for the unit must be rated in accordance with the unit’s nameplate.

• Do not modify the plug nor use an adapter that would eliminate the ground connection.

• Do not use an extension cord to connect the unit to an AC outlet. Use only the power cord that came with the unit.

• Comply with all applicable wiring and safety regulations, such as National Electrical Code (NEC) in the United States.

• Do not plug additional equipment into the outlet where the unit is plugged in. Overloading the outlet may cause an electric shock or ﬁre.

• Do not attempt to turn the unit on or off by connecting or disconnecting the AC plug. A serious electric shock may occur. Use the ON/OFF

button to turn the unit on or off.

• Turn the unit off and unplug it from the AC outlet before performing maintenance.

• Before connecting the unit to a dedicated drainage system, turn it off and unplug it. There is a risk of electric shock while the unit is plugged in.

• Maintenance should be performed by trained personnel only.

• Do not use thinners, alcohol, detergents or abrasive brushes to clean the unit’s cabinet. These items may damage the cabinet.

• Do not pour water over the unit. This may cause an electric shock and damage the unit.

• Do not operate the unit without the air ﬁlter. This may cause dust accumulation that may damage the unit.

• Do not attempt to operate the unit in a room with inadequate air circulation. Provide makeup air in accordance with applicable building codes.

• Do not place objects on top of the unit.

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life

support equipment or to signiﬁcantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a

ﬂammable anesthetic mixture with air, oxygen or nitrous oxide.

1. Cooling a small room. 2. Cooling an overheated rack enclosure. 3. Cooling an equipment hot spot inside or

outside a rack enclosure.

1 After removing the protective covering, wrapping, foam insulation and other packing

materials (instructions found in the Unpacking Instructions guide attached to the outside of

the unit), remove the four bolts A securing the unit to the pallet with an appropriately sized

wrench.

2 Remove the two shipping brackets by pulling the top lip under and away from the unit B.

3 Position at least one person on each side of the unit and slowly push it toward the back of

the shipping pallet C until all four casters go over the edge of the pallet and touch the ﬂoor.

WARNING: Use at least one assistant when removing the unit from the pallet.

Unpacking

Note: Make sure the unit and attached pallet is placed on a level surface before unpacking.

Especificaciones del producto

Marca:	Tripp Lite
Categoría:	aire acondicionado
Modelo:	SmartRack SRCOOL18K
Tipo de operación:	Knoppen
Color del producto:	Zwart, zilver
Peso.:	1800 g
Ancho:	400 mm
Profundidad:	180 mm
Altura:	90 mm
Material de la carcasa:	Kunststof
Activos:	120 W
Certificación:	GS / CE
Ancho máximo de trabajo:	300 mm
voltaje-de-entrada-de-CA:	220 - 240 V
Frecuencia-de-entrada-de-CA:	50 Hz
Características del sellador al vacío:	Marinate, Vac seal
Contenedor de almacenamiento de alimentos al vacío incluido.:	Ja
Número de bolsas de vacío:	10
Contenedor de almacenamiento de alimentos al vacío:	9000 ml
Número de bombas de vacío:	1
Doble soldadura:	Ja
Doble costura:	Ja
Barra de sellado de doble tamaño:	Ja