Tusa TUL-400 Manual de Usario

Lee a continuación 📖 el manual en español para Tusa TUL-400 (1 páginas) en la categoría No categorizado. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
TUSA WATERPROOF FLASHLIGHT USER MANUAL
FEATURES
This stylish waterproof ashlight is compact yet bright, using a long life CREE-XPG LED for
maximum eect. The magnetic tail switch features variable power control: push one time
for 100% power, 2 times for 30% power, 3 times for o. From any setting, push and hold
switch for 3 seconds to activate emergency strobe. The magnetic switch eliminates water
leakage often seen in conventional models and has a high capacity to withstand pressure.
CAUTION: Make sure to only use equally charged batteries-do not mix and match. Never
mix Alkaline and Lithium batteries.
SWITCH CARE: Because a magnet is used in the tail switch section, tiny naturally occurring
iron particles (iron sand) can accumulate on the switch during diving. After every dive,
wash thoroughly in fresh running water to remove any such iron sand, as well as dirt and
salt. The push button switch is designed to allow water to enter switch area. It is very
important to ush salt water from chamber. Hold switch under ow of cool fresh water.
Turn upside down and depress switch several times until no more water comes out. Repeat
process 2-3 times to ensure that all salt water is ushed from compartment. Do not drop or
place the ashlight on sand or dirt, since iron sand may stick or go into switch section.
1) Turn the switch end cap at the rear of the ashlight’s body counter-clockwise and remove it.
2) Slide out battery cradle and remove depleted batteries.
3) Install (3) fresh AAA batteries into the cradle. Follow the +/- polarity as shown.
4) Clean by removing any sand or dirt from screw threads and O-rings on switch end cap and then
apply a small amount of silicone grease on O-rings.
5) Also check and clean (if necessary) the screw threads inside ashlight body.
6) Slide the battery cradle back into the ashlight body, spring-end towards the ashlight head.
7) Once you have inserted the battery cradle, securely tighten the switch end cap back into place
by turning clockwise.
USAGE CAUTIONS
HOW TO REPLACE THE BATTERIES
Model# TUL-400MDR (wide beam) or TUL-410MBL (concentrated beam)
BODY BATTERY CRADLE SWITCH END CAP
SPECIFICATIONS
TUL-400MDR (wide beam)
LED: CREE-XPG; 100,000 hour lifetime
Battery: 3AAA
Lumens: 165
Beam angle: 50~60 degrees
Magnetic tail switch: 100% - 30% - hold for strobe
Burn time: 100% - 2 hours consecutive;
30% - 7 hours consecutive
Waterproof to 400 feet / 122 meters
Net weight: 5.82 +/- 0.35 oz, 165 +/- 10g
(without battery and hand strap)
Dimensions: Φ(1.49 x 5.12) inches / (3.8 x 13) cm
Use environment: 0-40 C°
TUL-410MBL (concentrated beam)
LED: CREE-XPG; 100,000 hour lifetime
Battery: 3AAA
Lumens: 220
Beam angle: 5~6 degrees
Magnetic tail switch: 100% - 30% - hold for strobe
Burn time: 100% - 2 hours consecutive;
30% - 7 hours consecutive
Waterproof to 400 feet / 122 meters
Net weight: 5.82 +/- 0.35 oz, 165 +/- 10g
(without battery and hand strap)
Dimensions: Φ(1.49 x 5.12) inches / (3.8 x 13) cm
Use environment: 0-40 C°

Especificaciones del producto

Marca: Tusa
Categoría: No categorizado
Modelo: TUL-400
Color del producto: Wit
Peso.: 500 g
Ancho: 110.8 mm
Profundidad: 118.5 mm
Altura: 65 mm
Amable: IP-beveiligingscamera
Material de la carcasa: Metaal
Código de seguridad internacional (IP): IP67
Bluetooth: Nee
Capacidad máxima de la tarjeta de memoria: 64 GB
Formato de audio soportado: AAC, G.711
factor vorm: Dome
Soporte de colocación: Buiten
Tecnología de conectividad: Bedraad
red LAN: Ja
Método de montaje: Plafond/muur
Resolución Máxima: 1280 x 960 Pixels
Número total de megapíxeles: 1.3 MP
Formatos de compresión de vídeo: H.264, H.265, HEVC, M-JPEG
Tipo de fuente de energía: Power over Ethernet (PoE)
Iluminación mínima: 0 Lux
Número de cámaras: 1
Lector de tarjetas de memoria integrado: Ja
Tarjetas de memoria compatibles: MicroSD (TransFlash), MicroSDHC, MicroSDXC
Disco duro incorporado: Nee
Vision nocturna: Ja
tipo LED: IR
Distancia focal fija: 3.6 mm
Detección de movimiento por vídeo: Ja
Consumo de energía (máx.): 5.5 W
Tamaño del sensor óptico: 1/3 "
Tipo de sensor de imagen: CMOS
Velocidad de obturación de la cámara: 1/100000 - 1/5 s
Interfaz: RJ-45
Micrófono incorporado: Ja
Resoluciones de gráficos compatibles: 704 x 576,1280 x 720 (HD 720),1280 x 960
Funciones de seguridad: Vandaalbestendig
Máximo 30 cuadros por segundo: 30 fps
Protocolos de red compatibles: TCP/IP, UDP, RTP, RTSP, RTCP, HTTP, HTTPS, DNS, DDNS, DHCP, FTP, NTP, SMTP, SNMP, UPnP, SIP, IPv6, PPPoE, VLAN
Gestión basada en web: Ja
Exploración progresiva: Ja
Tipo de interfaz Ethernet: Fast Ethernet
Alimentación a través de Ethernet (PoE): Ja
yo codifico: IK09
Modo día/noche: Ja
Número de apertura máxima: 1.6
A prueba de la intemperie: Ja
Alcance de visión nocturna: 15 m
Filtro de terminación de infrarrojos (IR): Ja
Compensación de retroiluminación: Ja
Ajuste de calidad de imagen: Brightness, Contrast, Saturation, Sharpness
Consumo de energía (alimentación a través de Ethernet (PoE)): 3.5 W
Amplio rango dinámico (WDR): Ja
tasa-de-bits: 16Kbps - 16Mbps
Wifi.: Nee
Temperatura de funcionamiento (TT): -30 - 60 °C
Humedad relativa de funcionamiento (VV): 0 - 90 procent
Máscara zona privada: Ja
Ángulo de visión de la lente, horizontal: 76.8 °
Tecnología de reducción de ruido: Ultra 3D-ruisonderdrukking
Interfaz de montura de lente: M12
Codificación de región de interés (ROI): Ja
Reducción de ruido 3D: Ja

¿Necesitas ayuda?

Si necesitas ayuda con Tusa TUL-400 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Tusa Manuales

No categorizado Manuales

Últimos No categorizado Manuales