TW Steel CEO Tech NL Manual de Usario

TW Steel Mirar CEO Tech NL

Lee a continuación 📖 el manual en español para TW Steel CEO Tech NL (17 páginas) en la categoría Mirar. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/17

CEO TECH

TW STEEL

TW Steel is a watch brand harmoniously combining

both design and innovation. ‘The Watch in Steel’ leads

the oversized market with style and quality guaranteed.

TW Steel values the most important relationship of all –

the one with the consumer. To express this, we hereby

give you all the information that you need to enjoy your

TW Steel watch to the fullest.

MAINTENANCE

TW Steel uses the best materials and carries out strict

controls before the watch leaves the factory.

The way in which you wear or treat your TW Steel will

determine whether the appearance of the watch is

maintained in the future, or whether it will deteriorate.

In order to enjoy wearing your TW Steel as long as

possible, we include a number of tips: If the watch

comes into contact with hard or corrosive materials,

this can cause damage, which, if it occurs regularly, will

become clearly visible in the form of scratches.

Your watch should be cleaned with a soft cotton cloth

that is not impregnated with any cleaning material.

Absolutely no cleaning materials should be used. It

is advisable to regularly polish your watch with a soft

cotton cloth. The watch is a precision mechanical

instrument and should be treated as such. Adjusting the

time or date, opening or closing the crown or crowncap,

should not be done roughly, but carefully.

ENGLISH

USE OF THE CROWN

To adjust the time or set the date, unscrew the crown

anti-clockwise. Pull the crown out to the 1st or 2nd

position. After adjusting, screw the crown clockwise back

on the case.

ADJUSTING THE TIME

Pull the crown out to the 2nd position so that the second

hand stops at the (0) position. Turn the crown to set the hour

and minute hands.

ADJUSTING THE DATE

Pull the crown out to the 1st position. Turn the crown anti-

clockwise to set the date. After the date has been set, push

the crown back to its normal position. Once you have set the

date or time or adjusted the chronograph second hand, push

the crown back to its normal position and screw the crown

clockwise back to the case.

USING THE CHRONOGRAPH

The chronograph is able to measure and display the time accurately

to 1/20th of a second, up to a maximum of 59 minutes and 59

seconds. The retrograde chronograph 1/20 second hand keeps

running continuously for 30 seconds after starting and then stops

at the (0) position. Press button B to change the watch to the

chronograph mode. The second hand stops at the (0) position and

changes to the chronograph 1/20 second hand. The chronograph

can be started and stopped at any time by pressing button A.

Pressing button B resets the chronograph. All hands will then return

to their (0) position. The chronograph second hand can be restarted

by pressing button B once again.

Hour hand

Chronograph minute

hand

Chronograph second

hand

Second hand

Date

(0) position

Button A

Minute hand

24-hour hand

Crown / normal

crown position

Button B

If the chronograph second hand and the chronograph 1/20 second

hand do not return to the (0) position after the chronograph has

been reset or after the battery has been replaced, you should do the

following. Pull the crown out to the 2nd position. Press button A to

set the chronograph second hand to the (0) position. Press button

B to set the chronograph 1/20 second hand to the (0) position. The

chronograph second hands can be advanced rapidly by continuously

pressing button A or B. Once the hands have returned to the (0)

position, return the crown to its normal position and screw the crown

cap clockwise back to the case.

CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO

LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!

Especificaciones del producto

Marca:	TW Steel
Categoría:	Mirar
Modelo:	CEO Tech NL
Color del producto:	Zwart
Peso.:	2000 g
Ancho:	320 mm
Profundidad:	320 mm
Altura:	21 mm
Amable:	Elektronische weegschaal
Apagado automático:	Ja
Mostrar.:	LCD
Batería/Voltaje de la batería:	1.5 V
Exactitud:	100 g
Número soportado de baterías/baterías:	2
Capacidad máxima de peso:	180 kg
Función de memoria:	Ja
Medición del índice de masa corporal (IMC):	Nee
Análisis de grasa corporal:	Ja
Porcentaje de agua corporal:	Ja
Análisis de relación/densidad muscular.:	Ja
Análisis de masa ósea:	Ja
Múltiples usuarios:	Ja
Número de usuarios:	8 gebruiker(s)
Indicador de sobrecarga:	Ja
Tipo de Batería:	AAA
Tamaño de pantalla (visualización):	61 x 59 mm
Tamaño de los dígitos:	26 mm