Unicol TBM1 Manual de Usario

Lee a continuación 📖 el manual en español para Unicol TBM1 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for pinch
points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any spring
loaded parts. Before installing, make sure that the supporting surface will support five times the combined
load of the solution and the hardware. Never exceed the maximum load capacity. Please also layout all
components to ensure that you have all of the required parts before proceeding (see BOM list on following
page). Use of this product for anything other than its specified use may result in failure or personal
injury. This product is intended for indoor use only. We recommend using a qualified trades person for
installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
Revised 15/12/23
01865 767676
sales@unicol.com
www.unicol.com
*Please check model specific details before installing*
TBM1 / TBM2
Screen Size: Guide Max. Weight: 7 - 15” 10kg
2Revised 15/12/23
COMPONENTS
01865 767676
sales@unicol.com
www.unicol.com
INSTALLERS REQUIRED
1
# DESCRIPTION QTY
1Backing Plate 1
2Front Cover 1
3M4 x 12mm Button Head Screws 2
#TOOLS REQUIRED
14mm Allen Keys
2Pozi Head Screwdriver
1
2
01865 767676
sales@unicol.com
www.unicol.com
3
Revised 15/12/23
STEP 1
Fix backing plate onto wall by bolting through the
4 central fixings highlighted above. Once fitted,
please fit any cabling, power, PoE or any other small
devices.
STEP 2
Place the tablet into the backing plate and cable up
as required.
STEP 4
Secure the front cover by tightening the top and
bottom screws using an allen key.
STEP 3
Once cabled up and resting in place, fit the front
cover over the tablet and backing plate, lining up the
fixing holes with the holes at the top and bottom of
the backing plate.

Especificaciones del producto

Marca: Unicol
Categoría: No categorizado
Modelo: TBM1

¿Necesitas ayuda?

Si necesitas ayuda con Unicol TBM1 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Unicol Manuales

Unicol

Unicol TBM1 Manual de Usario

27 Septiembre 2024
Unicol

Unicol WBVC Manual de Usario

17 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales