US Blaster USB 7334 Manual de Usario
US Blaster
Música de fiesta de DJ
USB 7334
Lee a continuación 📖 el manual en español para US Blaster USB 7334 (29 páginas) en la categoría Música de fiesta de DJ. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/29
OWNERS MANUAL
‘BLACK SABBATH’ CD PLAYERS
USB 7334 - 7335 - 7336
USB 7334 - 7335 - 7336
‘Black Sabbath’ CD Players
GENERAL SAFETY INSTRUCTIONS
BE CAREFUL WITH HIGH TEMPERATURES, AVOID DUST & MOISTURE, KEEP AWAY FROM TV &
MAGNETISM, AVOID PLACING ON UNSTABLE LOCATION, DO NOT USE CHEMICALS, IF OUT OF
ORDER CONTACT SALES AGENCY IMMEDIATELY, DO NOT OPEN THE CASE, BE CAREFUL WITH THE
POWER CORD
FOR SAFE AND EFFICIENT OPERATION
1. Be careful with heat and extreme temperature
Avoid exposing it to direct sunlight or near a heating appliance. Do not exceed temperatures below
5 °C, or over 35 °C.
2. Keep away from humidity, water and dust.
Do not place appliance in a location with high humidity or lots of dust. Containers with liquid should
not be placed on the set.
3. Keep away from sources of hum and noise, such as a transformer motor, tuner, TV set or ampli-
fier.
4. Avoid placing on unstable locations. Select a level and stable location to avoid vibration.
5. Do not use chemicals or volatile liquids for cleaning.
Use a clean dry cloth to wipe off dust, or a moist soft cloth for stubborn dirt.
6. If out of order, contact sales agency immediately.
If any troubles arise, remove the power plug immediately, and contact an engineer for repairing.
Do not open the cabinet yourself, it may result in an electric shock.
6-1. Be careful with the power cable.
Never pull the power cable to remove the plug from the outlet, be sure to hold the plug. When not
using the player for an extended period of time be sure to disconnect the plug from the outlet.
7. Handle the compact disc carefully.
Always keep the disc clean; do not use cracked discs, it will damage the player.
Keep the packaging safe so that, if the equipment is defective, you can
send it back in its original packaging and so avoid any damage.
©US Blaster Europe BV
Do not carry out any repairs on the equipment yourself; doing so will invalidate the guarantee.
The equipment may also not be modified; doing so will also invalidate the guarantee.
The guarantee is also invalidated if accidents and damage of any form are caused as a result
of improper use and/or not heeding the warnings in general as laid out in this user guide.
US Blaster Europe accepts no responsibility for any personal accidents as a consequence of not
following the safety instructions and warnings. This is also the case for consequential loss in
any form.
USB 7334 - 7335 - 7336
‘Black Sabbath’ CD Players
1. POWER BUTTON
Press the power switch to turn the unit on. To switch the POWER off press the
POWER switch again.
2. JOG & SHUTTLE WHEELS
Shuttle: Use the dial to select the scanning direction and speed. The disc is scanned in forward
direction when the shuttle dial is turned clockwise from the neutral position and in the reverse
direction when the shuttle dial is turned counter-clockwise. The scanning speeds up when the
shuttle dial is tumed faster.
Jog: ln pause mode, if you turn the jog, the point at which the sound is being produced moves by
anumber of frames corresponding to the number of clicks. Clockwise moves the point forward,
counterclockwise moves the point backward.
In play mode ,the jog increases or decreases the speed of the song.
(clockwise : increase, counter-clockwise: decrease).
3. TIME BUTTON
Use this button to choose the time mode: Elapsed time, remaining time or total remaining time.
4. REPEAT BUTTON
Use this button to repeat one track or all the tracks of the CD.
5. PGM BUTTON
You can program several tracks (20 tracks max.):
-Press the PGM button to enter the program mode.
-Use the skip track buttons to choose the track you want, then press the PGM button
-Repeat the operation to select all the tracks you want.
-Press the play / pause button to start the playback.
6. IN BUTTON (LOOP SYSTEM)
This button sets the beginning of the loop. The loop indicator flashes on the display.
7. OUT BUTTON (LOOP SYSTEM)
When you press this button, you set the end point of the seamless loop and you start the loop.
Tofinish the loop, press this button again.
8. RELOOP BUTTON (LOOP SYSTEM)
Use this button to start the last saved loop.
9. SKIP |<< BUTTON
Use this button to re-start the track or to select the previous track.
10. SKIP >>| BUTTON
Use this button to select the next track.
11. PLAY/PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from
pause to play.
Especificaciones del producto
| Marca: | US Blaster |
| Categoría: | Música de fiesta de DJ |
| Modelo: | USB 7334 |
¿Necesitas ayuda?
Si necesitas ayuda con US Blaster USB 7334 haz una pregunta a continuación y otros usuarios te responderán
Música de fiesta de DJ US Blaster Manuales
5 Septiembre 2024
1 Septiembre 2024
30 Agosto 2024
28 Agosto 2024
28 Agosto 2024
28 Agosto 2024
24 Agosto 2024
16 Agosto 2024
Música de fiesta de DJ Manuales
- Música de fiesta de DJ Pioneer
- Música de fiesta de DJ Gemini
- Música de fiesta de DJ Vonyx
- Música de fiesta de DJ Envivo
- Música de fiesta de DJ Skytec
- Música de fiesta de DJ Atomix
- Música de fiesta de DJ Hercules
- Música de fiesta de DJ Serato
Últimos Música de fiesta de DJ Manuales
23 Septiembre 2024
22 Septiembre 2024
8 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024