Valcom V-A2416B Klok Manual de Usario
Lee a continuación 📖 el manual en español para Valcom V-A2416B Klok (33 páginas) en la categoría el reloj. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/33
Valcom, Inc.
5614 Hollins Road
Roanoke, VA 24019
USA
P. 540-563-2000
F. 540-362-9800
www.valcom.com
Valcom Wired Analog Clocks
Installation Manual V2.0
Current as of November 2016
V-A2412 / V-A2412B and V-A2416 / V-A2416B
V-A11012 / V-A11012B and V-A11016 / V-A11016B
2
Valcom, Inc.
5614 Hollins Road
Roanoke, VA 24019
USA
P. 540-563-2000
F. 540-362-9800
www.valcom.com
Valcom Wired Analog Clocks
Table of Contents
Table of Contents 2
Important Safety Instructions 3
Identify Your Clock 4
Wall Mount Installation - 5 - 8
Flag Mount Installation - 9 - 15
Double Mount Installation - 16 - 20
Wiring Information - 2-Wire Digital Communication 21
- 3-Wire Synchronous (Sync-Wire) Communication 24V 22
- 3-Wire Synchronous (Sync-Wire) Communication 110VAC 23
Frequently Asked Questions 24
Questions about Protocols 25
Troubleshooting 26
Diagnostic #1 - Protocol Verification 27 - 28
Diagnostic #2 - Comprehensive Test 29 - 30
Diagnostic #3 - Manufacturing Default 31 - 32
Warranty 32
Manuals may change without prior notice
3
Valcom, Inc.
5614 Hollins Road
Roanoke, VA 24019
USA
P. 540-563-2000
F. 540-362-9800
www.valcom.com
Important Safety Instructions
VERY IMPORTANT:
KNOW YOUR COMMUNICATION PROTOCOL
The Valcom Wired clock is designed to support the 2-Wire Digital Communication Protocol as well as
3-wire (sync-wire) communication protocols. To run either system properly, the clock requires the correct
wiring format. It is very important that you only follow the wiring instructions appropriate to your clock’s
communication protocol. For example: if your system includes converter boxes which are only used for the
2-wire system, then you should only follow the instructions that relate to the 2-wire digital communication
protocol wiring.
,H
|
DANGER
SHOCK HAZARD
• Keep the electricity to this device turned
OFF until the clock installation
is complete.
• Do not expose the clock movement to
water, or install the clock in a location
where it may be exposed to water.
WARNING
FIRE HAZARD
• Always follow your national and regional
electrical codes or ordinances.
• The AC power circuit for the clock must
be attached to a circuit breaker that can
be reset by the user.
PHYSICAL INJURY HAZARD
• If you are standing on an object while
installing your clock, make sure that the
object can support your weight, and will
not sway or move as you stand on it.
• Take precautions to avoid injury by
potential safety hazards near the point
of installation including (but not limited
to) heavy machinery, sharp objects, hot
surfaces, or exposed cables carrying an
electric current.
• Follow all mounting instructions exactly
as stated in this manual. Failure to do so
may result in the device falling off the
point of installation.
• Packaging materials and mounting items
include plastic bags and small pieces,
which pose a suffocation hazard to
young children.
NOTICE
• Do not install the clock outdoors.
Damage to the clock if placed outdoors
voids the warranty.
• Do not hang objects from the clock or
clock mounting parts. The clocks are not
designed to support the weight of other
objects.
• The clock face and housing may
be cleaned with a damp cloth or
disinfectant. Test other cleaning products
on a small part of the clock housing
before attempting to use on the rest of
the clock. Avoid bleach and chemicals
known to dissolve plastics.
! !
Especificaciones del producto
| Marca: | Valcom |
| Categoría: | el reloj |
| Modelo: | V-A2416B Klok |
¿Necesitas ayuda?
Si necesitas ayuda con Valcom V-A2416B Klok haz una pregunta a continuación y otros usuarios te responderán
el reloj Valcom Manuales
16 Julio 2024
el reloj Manuales
Últimos el reloj Manuales
19 Octubre 2024
16 Octubre 2024