Velleman K7302 Manual de Usario

Velleman cargador de bateria K7302

Lee a continuación 📖 el manual en español para Velleman K7302 (12 páginas) en la categoría cargador de bateria. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/12

UNIVERSAL BATTERY CHARGER

K7302

ILLUSTRATED ASSEMBLY MANUAL H7302IP-1

Total solder points: 20

Diﬃculty level: beginner 1 2 3 4    5 advanced

Low cost soluton for charging of

both NiCd and NiMh batteries.

Specifications:

 Charges Ni Cd or Ni MH batteries.

 Ideal for in car use.

 Transforms a mains adapter into a charger (adapter socket included).

 Charge cellular phone, toys, portables, video batteries …

 Selectable charge current.

 LED charge indication.

Features:

 Charge current (±20%): 50mA, 100mA, 200mA, 300mA, 400mA. (selectable)

 Supply voltage: from 6.5VDC to 21VDC (depending on used battery)

 Supply current: same as charge current.

 Power supply polarity protected.

 LED function indication.

 Dimensions: 40 x 60 mm

 Fits in G403 type housing

Features & Specifications

Assembly hints

1. Assembly (Skipping this can lead to troubles ! )

Ok, so we have your attention. These hints will help you to make this project successful. Read them carefully.

1.1 Make sure you have the right tools:

• A good quality soldering iron (25-40W) with a small tip.

• Wipe it often on a wet sponge or cloth, to keep it clean; then apply solder to the tip, to give it a wet look. This is called ‘thinning’ and will

protect the tip, and enables you to make good connections. When solder rolls off the tip, it needs cleaning.

• Thin raisin-core solder. Do not use any flux or grease.

• A diagonal cutter to trim excess wires. To avoid injury when cutting excess leads, hold the lead so they

cannot fly towards the eyes.

• Needle nose pliers, for bending leads, or to hold components in place.

• Small blade and Phillips screwdrivers. A basic range is fine.

For some projects, a basic multi-meter is required, or might be handy

1.2 Assembly Hints :

⇒ Make sure the skill level matches your experience, to avoid disappointments.

⇒ Follow the instructions carefully. Read and understand the entire step before you perform each operation.

⇒ Perform the assembly in the correct order as stated in this manual

⇒ Position all parts on the PCB (Printed Circuit Board) as shown on the drawings.

⇒ Values on the circuit diagram are subject to changes.

⇒ Values in this assembly guide are correct*

⇒ Use the check-boxes to mark your progress.

⇒ Please read the included information on safety and customer service

* Typographical inaccuracies excluded. Always look for possible last minute manual updates, indicated as ‘NOTE’ on a separate leaflet.

0.0 0

Especificaciones del producto

Marca:	Velleman
Categoría:	cargador de bateria
Modelo:	K7302
Ancho:	348 mm
Profundidad:	243 mm
red LAN:	Ja
Número de puertos USB 2.0:	2
Número de puertos HDMI:	1
Número de puertos Ethernet LAN (RJ-45):	2
Versión HDMI:	2.0b
Puertos DVI-D:	1
Número de DisplayPorts:	1
Temperatura de almacenamiento:	0 - 50 °C
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	2
Zócalo del procesador:	LGA 1200
Fabricante del procesador:	Intel
Memoria interna máxima:	128 GB
Número de puertos USB 3.2 Gen 2 (3.1 Gen 2) Tipo C:	2
Canales de salida de audio:	- kanalen
ETC:	Ja
Tipo de interfaz Ethernet:	2.5 Gigabit Ethernet, Gigabit Ethernet
Número de puertos USB 3.2 Gen 2 (3.1 Gen 2) Tipo A:	4
Versión DisplayPort:	1.4a
Tipo de ranura de memoria:	DIMM
Soporte RAID:	Ja
Interfaces de unidad de almacenamiento compatibles:	M.2, SATA
Puertos seriales):	1
Componente para:	PC
voltaje de la memoria:	1.2 V
Controlador LAN:	Intel I225-V
Tipos de incursión:	0, 1,5, 10
Número de conectores SATA III:	4
No ECC:	Ja
Activación de la LAN:	Ja
Ranuras PCI:	1
Procesadores compatibles:	Intel Core i5, Intel Core i7, Intel Core i9
Serie Intel® Xeon:	W3500
Tipos de memoria soportados:	DDR4-SDRAM
Temperatura de funcionamiento (TT):	-20 - 60 °C
Código del Sistema Armonizado (SA):	84733020
Familia de chipsets de placa base:	Intel
Factor de forma de la placa base:	ATX
Número de ranuras de memoria:	4
Velocidades de reloj de memoria admitidas:	3200 MHz
tipo de BIOS:	AMI
Tamaño de la memoria del BIOS:	256 Mbit
Versión ACPI:	6.0
monitor de salud de la computadora:	LED, Temperature, Voltage
Conector TPM:	Ja
Capacidades de módulos de memoria admitidas:	2GB, 4GB, 8GB, 16GB, 32GB
Zócalos de procesador compatibles:	LGA 1200 (Socket H5)
Número de ranuras M.2 (M):	1
Ranuras PCI Express x16 (Gen 4.x):	2