Verona VPFSGG365DW Manual de Usario

Verona horno VPFSGG365DW

Lee a continuación 📖 el manual en español para Verona VPFSGG365DW (27 páginas) en la categoría horno. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/27

DOUBLE OVEN GAS RANGE

Models: VPFSGG365D..

INSTALLATION INSTRUCTIONS

IMPORTANT - PLEASE READ AND FOLLOW

• Before beginning, please read these instructions completely and carefully.

• Do not remove permanently affixed labels, warnings, or plates from the product. This may

void the warranty.

• Please observe all local and national codes and ordinances.

• Please ensure that this product is properly grounded.

• The installer should leave these instructions with the consumer who should retain

for local inspector’s use and for future reference.

• The electrical plug should always be accessible.

Installation must conform with local codes or in the absence of codes, the National Fuel Gas

Code ANSI Z223.1/NFPA 54 - Iatest edition. Electrical installation must be in accordance

with the National Electrical Code, ANSI/NFPA70 - latest edition and/or local codes. IN

CANADA: Installation must be in accordance with the current CAN/CGA-B149.1 National

Gas Installation Code or CAN/CGA-B149.2, Propane Installation Code and/or local codes.

Electrical installation must be in accordance with the current CSA C22.1 Canadian Electrical

Codes Part 1 and/or local codes.

INSTALLATION IN MANUFACTURED (MOBILE) HOME: The installation must conform with

the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 [formerly

the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD (Part 280)]

or, when such standard is not applicable, the Standard for Manufactured Home Installations,

ANSI/NCSBCS A225.1, or with local codes where applicable.

INSTALLATION IN RECREATIONAL PARK TRAILERS: The installation must conform with

state or other codes or, in the absence of such codes, with the Standard for Recreational

Park Trailers, ANSI A119.5.

Installation of any gas-fired equipment should be made by a Iicensed plumber. A manual

shut-off valve must be installed in an accessible location in the gas line external to the

appliance for the purpose of turning on or shutting off gas to the appliance (In Massachusetts

such shutoff devices should be approved by the Board of State Examiners of Plumbers &

Gas Fitters).

If an external electrical source is utilized, the appliance, when installed, must be electrically

grounded in accordance with local codes or, in the absence of local codes, with the national

Electrical Code, ANSI/NFPA 70.

FOR INSTALLER ONLY

THIS RANGE IS FOR RESIDENTIAL USE ONLY

Some models are supplied with a protective lm on steel and aluminium

parts. This lm must be removed before installing/using the appliance.

– Do not store or use gasoline or other ammable vapors and

liquids in the vicinity of this or any other appliance.

– NEVER use this appliance as a space heater to heat or

warm the room. Doing so may result in carbon monoxide

poisoning and overheating of the appliance.

– WHAT TO DO IF YOU SMELL GAS:

• Do not try to light any appliance.

• Do not touch any electrical switch.

• Do not use any phone in your building.

• lmmediately call your gas supplier from a neighbor’s

phone. Follow the gas supplier’s instructions.

• lf you cannot reach your gas supplier, call the re

department.

– Installation and service must be performed by a qualied

installer, service agency, or the gas supplier.

If the information in this manual is not followed exactly,

a re or explosion may result causing property damage,

personal injury, or death.

WARNING !

WARNING

- Slide range back so bolt head, on the adjustable bracket assembly, is

-under anti-tip bracket.

- Look for the anti-tip bracket securely attached to oor or wall.

- See installation instructions for details.

- Look for the adjustable bracket assembly securely attached to

-the back of the range.

- Slide range forward.

To verify the anti-tip bracket is installed and engaged:

Tip-Over Hazard

Anti-tip bracket

Adjustable bracket

assembly to be xed to

the back of the range

A child or adult can tip the range and be killed.

Install anti-tip device to range and/or structure per installation

instructions.

Engage the range to the anti-tip device Installed to the structure.

Re-engage anti-tip device if range is moved.

Failure to follow these instructions can result in death or serious

burns to children and adults.

This appliance is designed and manufactured solely for the cooking of domestic (household)

food and in not suitable for any none domestic application and therefore should not be used in a

commercial environment.

The appliance warranty will be void if the appliance is used within a none domestic environment i.e.

a semi commercial, commercial or communal environment.

CONVERSION LABEL

DATA PLATE

WARNING: This product can expose you to chemicals including

formaldehyde, which is known to the State of California to cause cancer,

and lead, which is known to the State of California to cause birth defects or other

reproductive harm. For more information go to www. P65Warnings.ca.gov.

Especificaciones del producto

Marca:	Verona
Categoría:	horno
Modelo:	VPFSGG365DW
Peso.:	686 g
Tipo de conexión en serie:	RS-232/422/485
Número de puertos Ethernet LAN (RJ-45):	1
Certificación:	CE, FCC, EN 55022 Class A, FCC Part 15 Subpart B Class A, EN 55024, EN 50155, EN 50121-4, IEC 60068-2-6
Voltaje de entrada:	12 - 48 V
LAN Ethernet, velocidades de transferencia de datos:	10, 100 Mbit/s
Sistemas operativos compatibles:	Windows 98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8 x86/x64, 2012 x64\r\nSCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac 10.3\r\nLinux kernel 2.4.x, 2.6.x, 3.x
Protocolos de red compatibles:	ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2, LLDP
Seguridad:	UL 60950-1, EN 60950-1
Gestión del flujo de datos:	Ja
Dimensiones (Ancho x Fondo x Alto):	80 x 216.6 x 52.9 mm
Puertos seriales):	4
Temperatura de funcionamiento (TT):	-25 - 55 °C
Señales RS-422:	GND, RxD+, RxD-, TxD+, TxD-
Señales RS-485:	Data+, Data-, GND, RxD+, RxD-, TxD+, TxD-
Señales RS-232:	CTS, DCD, DSR, DTR, GND, RTS, Rx, Tx