Viewsonic PA700X Manual de Usario

Lee a continuación 📖 el manual en español para Viewsonic PA700X (82 páginas) en la categoría proyector. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/82
PA700S_PA700X_PA700W
PS502X_PS502W
DLP Projector
User Guide
Model No. VS19341 | VS19343 | VS19342 | VS19344 | VS19345
P/N: PA700S | PA700X | PA700W | PS502X | PS502W
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in
a safe manner, as well as registering your product for future service. Warranty information contained in this User
Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at ®
http://www.viewsonic.com in English, or in specific languages using the Regional selection box of our website.
2
Thank you for choosing ViewSonic®
As a world-leading provider of visual solutions, ViewSonic® is dedicated to
exceeding the world’s expectations for technological evolution, innovation, and
simplicity. At ViewSonic®, we believe that our products have the potential to make
a positive impact in the world, and we are confident that the ViewSonic® product
you have chosen will serve you well.
Once again, thank you for choosing ViewSonic®!
3
Safety Precauons
P wing before you start using the projector.lease read the follo Safety Precauons
Keep this user guide in a safe place for later reference.
Read all warnings and follow all instrucons.
Allow at least 20“ (50 cm) clearance around the projector to ensure proper
venlaon.
Place the projector in a well-venlated area. Do not place anything on the
projector that prevents heat dissipaon.
Do not place the projector on an uneven or unstable surface. The projector may
fall over, causing personal injury or projector malfuncon.
Do not look straight at the projector lens during operaon. The intense light
beam may damage your eyes.
Always open the lens shuer or remove the lens cap when the projector lamp is
on.
Do not block the projecon lens with any objects when the projector is under
operaon as this could cause objects to become heated and deformed or even
cause a re.
The lamp becomes extremely hot during operaon. Allow the projector to
cool for approximately 45 minutes prior to removing the lamp assembly for
replacement.
Do not use lamps beyond the rated lamp life. Excessive use of lamps beyond the
rated life could cause them to break on rare occasions.
Never replace the lamp assembly or any electronic component unless the
projector is unplugged.
Do not aempt to disassemble the projector. There are dangerous high voltages
inside which may cause death if you should come into contact with live parts.
When moving the projector, be careful not to drop or bump the projector on
anything.
Do not place any heavy objects on the projector or connecon cables.
Do not stand the projector on end vercally. Doing so may cause the projector to
fall over, causing personal injury or projector malfuncon.
Avoid exposing the projector to direct sunlight or other sources of sustained
heat. Do not install near any heat sources such as radiators, heat registers,
stoves, or other devices (including ampliers) that may increase the temperature
of the projector to dangerous levels.

Especificaciones del producto

Marca: Viewsonic
Categoría: proyector
Modelo: PA700X
Color del producto: Rood
Ancho: 745 mm
Altura: 845 mm
Manual de usuario: Ja
Diámetro: 750 mm
Material: Aluminium, Plastic, Steel
Fortalecimiento: 38.5 dBi
Rango de frecuencia de entrada: 10.7 - 12.75 GHz

¿Necesitas ayuda?

Si necesitas ayuda con Viewsonic PA700X haz una pregunta a continuación y otros usuarios te responderán




proyector Viewsonic Manuales

proyector Manuales

Últimos proyector Manuales