Viking K-1900-712L-EWP Manual de Usario
Viking
sistema de intercomunicación
K-1900-712L-EWP
Lee a continuación 📖 el manual en español para Viking K-1900-712L-EWP (8 páginas) en la categoría sistema de intercomunicación. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/8
Applications
The K-1900-7 Series panel phones will auto-dial a 1-32 digit programmable phone number
each time the handset is lifted. The unit will touch tone or pulse dial and will not auto-dial
on incoming calls.
The K-1900-7 Series housing consists of a heavy gauge stainless steel panel, an armored
cable, a heavy duty handset, and an all metal cradle. The K-1900-7 Series phone can be
easily touch tone programmed at the shop or installation site. All programming is stored in
non-volatile memory.
The K-1900-712L and K-1900-712L-EWP feature a 12” long armored cable with an internal
stainless steel lanyard for additional cable strength.
The K-1900-7-EWP and K-1900-712L-EWP share all of the features of the K-1900-7 and
K-1900-712L in addition to Enhanced Weather Protection (EWP) for outdoor installations
where the unit is exposed to precipitation or condensation. EWP products are designed to
meet IP66 standards and may feature foam rubber gaskets, sealed connections, gel-filled
butt connectors, as well as potted circuit boards with internally sealed, field-adjustable trim
pots and DIP switches for easy on-site programming. For more info on EWP, see DOD 859.
Note: SR-1 DOD 477 LPR-1 DOD 550 If a ringer is required, use an external unit such as the Viking ( ), or ( ).
Vandal Resistant
Hot-Line Panel Phones
Features
Specifications
PRODUCT
MANUAL
Designed, Manufactured and Supported in the USA K-1900-7 Series
Hot-Line Panel Phone
June 6, 2022
SECURITY & COMMUNICATION
VIKING
• Vandal Resistant Features: 12 gauge (0.105” thick) 316 stainless steel panel
with permanent laser etched graphics, armored cable, metal cradle and hex
drive mounting screws
• Marine grade 316 stainless steel faceplate and Weather Resistant Features:
screws
• Auto dials one programmable speed dial number (up to 32 digits)
• Touch tone or pulse dialing
• Non-volatile memory (no batteries required)
• Operates on analog PABX and key system extensions or Centrex and CO lines
• Programmable 6 digit security code
• Touch tone programmable
• Optional Enhanced Weather Protection (EWP) available - EWP products are
designed to meet IP66 Ingress Protection Rating, see DOD 859
• 12” armored handset cord on andK-1900-712L K-1900-712L-EWP
• 36” armored handset cord on K-1900-7
• 54” armored handset cord on K-1900-7-EWP
• Programmable pre-dial pause
• Blocks fraudulent calls from hand held pocket dialers
• Hearing aid compatible amplified handset with sealed push button volume
control
• Programmable default volume level
• Programmable volume control disable
• Flush mount using a standard double-gang box (not included)
• Surface mount using an optional surface mount box (not included, see VE-5x10
DOD 424)
Power: Telephone line powered (20V DC/18mA minimum)
Dimensions for Standard Model:
Phone: 5.0” x 10.0” x 5.1” (127mm x 254mm x 130mm)
With rough-in box: 5.0” x 10.0” x 5.2” (127mm x 254mm x 132mm)
Dimensions for EWP Model:
Phone: 5.0” x 10.0” x 5.18” (127mm x 254mm x 132mm)
With rough-in box: 5.0” x 10.0” x 5.28” (127mm x 254mm x 134mm)
Shipping Weight: 4 lbs (1.8 kg )
Operating Temperature: -30°F to 140°F (-34°C to 60°C)
Humidity - Standard Model: 5% to 95% non-condensing
Humidity - EWP Model : Up to 100% condensing
K-1900-712L(EWP) Handset Cable Length: 12” to 12.7” (31 cm to 33 cm)
K-1900-7 Handset Cable Length: 34” to 37” (86 cm to 94 cm)
K-1900-7-EWP Handset Cable Length: 52” to 57” (132 cm to 145 cm)
Touch Tone Dial Speed: Normal = 120ms on/off, Fast = 50ms on/off
Pulse Dial Speed: Normal = 10 pps, Fast = 20 pps
Connections: (2) gel-filled butt connectors
K-1900-7-EWP
with 54”
armored cable
K-1900-712L or
K-1900-712L-EWP
with 12” armored
cable and lanyard
K-1900-7
with 36”
armored cable
• Catalog sales
• Kiosks
• Courtesy phones
• Automated tellers (ATM’s)
• Customer service phones
• Hot-line reservation phones
• Security and emergency phones
• Replaces leased ringdown circuits
• Gate/entrance communication in noisy
areas (diesel trucks, factory noise, etc.)
2
Features Overview
FRONT VIEW of the
K-1900-7 Series Panel Phone
Condensation Drain Hole
Mounting Screws:
(8) 6-32 x 3/4” marine grade
316 stainless steel, flat head,
hexdrive screws (included).
Laser Etched Graphics:
For long lasting easy to
read graphics.
Faceplate Material:
12 gauge 316 stainless steel
with a #4 brushed finish.
Metal Heavy Duty Vandal
Resistant Hookswitch
VIKING
Handset:
Hearing aid compatible
amplified handset with
sealed push button
volume control
Stainless Steel
Armored Cable:
36” on K-1900-7
54” on K-1900-7-EWP
12” on K-1900-712L
12” on K-1900-712L-EWP
3
Installation and Mounting
C.O. Line
or Analog
PABX/KSU
Station
*
*
SIDE VIEW
of the K-1900-7
(8) #6-32 x 3/4" Stainless
Steel Hexdrive
Screws (included)
10.0"
9.5"
4.50"
5.00"
3.28"
1.30"
FRONT VIEW
of the K-1900-7
1.8"
"Old Work"
Double Gang Bo
x
(not included)
Viking’s optional Surface Mount Boxes
(VE-5x10 shown right) are designed to be
surface mounted to a single gang box,
double gang box, or any Viking Gooseneck
Pedestal (VE-GNP shown left). For more
information on Viking Surface Mount Boxes
or Gooseneck Pedestals, see DOD 424.
OR
Optional Surface Mount Box,
model shownVE-5x10
(not included) other models
also available
10.14"
3.69"
5.22"
2.75"
Tall Min.
2.10"
Deep
Min.
3.50"
Wide
Min.
Red
Green
K-1900-7-EWP shown with
VE-5x10 Surface Mount
Box and VE-GNP
Gooseneck Pedestal
(not included)
To install the panel phone, attach the panel to an existing double gang box (with minimum dimensions shown K-1900-7
below) using the provided screws or use the optional weather resistant surface mount box. VE-5x10
Note: Four extra screws and nuts are provided to fill the unused mounting holes. The optional VE-5x10 surface mount box
(shown below right) is designed to be surface mounted to a wall, post, single gang box or a or goose VE-GNP VE-GNP-2
neck pedestal (shown below left). The can also be mounted in an optional K-1900-7 VE-9x20 Weatherproof Enclosure
( ). DOD# 413
Note: K-1900-7-EWP VE-9x20 When mounting a in a , the length of the handset cable must be reduced. Use a 3/32” hex
key or bit to loosen the set screw in the brass handset cable retainer. Pull approximately 18 inches of the cable through the
panel and retighten the set screw.
IMPORTANT: Electronic devices are susceptible to lightning and power station electrical surges. It is recommended
that a surge protector be installed to protect against such surges.
* Note: The gel-filled (water-tight) butt connectors are designed for
insulating displacement on 19-26 gauge wire with a maximum insulation
of 0.082 inches. Cut off stripped wire ends before terminating.
Especificaciones del producto
| Marca: | Viking |
| Categoría: | sistema de intercomunicación |
| Modelo: | K-1900-712L-EWP |
¿Necesitas ayuda?
Si necesitas ayuda con Viking K-1900-712L-EWP haz una pregunta a continuación y otros usuarios te responderán
sistema de intercomunicación Viking Manuales
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
sistema de intercomunicación Manuales
- sistema de intercomunicación Philips
- sistema de intercomunicación Panasonic
- sistema de intercomunicación Hikvision
- sistema de intercomunicación Elro
- sistema de intercomunicación EMOS
- sistema de intercomunicación Toa
- sistema de intercomunicación DataVideo
- sistema de intercomunicación Axis
- sistema de intercomunicación Byron
- sistema de intercomunicación Midland
- sistema de intercomunicación Smartwares
- sistema de intercomunicación Steren
- sistema de intercomunicación Dahua Technology
- sistema de intercomunicación Siedle
- sistema de intercomunicación Valcom
- sistema de intercomunicación Chacon
- sistema de intercomunicación Planet
- sistema de intercomunicación Konig
- sistema de intercomunicación Becken
- sistema de intercomunicación Busch-Jaeger
- sistema de intercomunicación Swann
- sistema de intercomunicación Extel
- sistema de intercomunicación Marmitek
- sistema de intercomunicación M-e
- sistema de intercomunicación DoorBird
- sistema de intercomunicación Gira
- sistema de intercomunicación Russound
- sistema de intercomunicación Fanvil
- sistema de intercomunicación Aiphone
- sistema de intercomunicación Avidsen
- sistema de intercomunicación Monacor
- sistema de intercomunicación RTS
- sistema de intercomunicación Vimar
- sistema de intercomunicación Akuvox
- sistema de intercomunicación Hollyland
- sistema de intercomunicación EtiamPro
- sistema de intercomunicación CyberData Systems
- sistema de intercomunicación COMMAX
- sistema de intercomunicación Bintec-elmeg
- sistema de intercomunicación Eartec
- sistema de intercomunicación Gewiss
- sistema de intercomunicación TCS
- sistema de intercomunicación Seco-Larm
- sistema de intercomunicación NuTone
- sistema de intercomunicación GEV
- sistema de intercomunicación Tador
- sistema de intercomunicación WHD
- sistema de intercomunicación Mobotix
- sistema de intercomunicación FlyingVoice
- sistema de intercomunicación Vibell
Últimos sistema de intercomunicación Manuales
27 Octubre 2024
26 Octubre 2024
8 Octubre 2024
1 Octubre 2024
27 Septiembre 2024
27 Septiembre 2024
22 Septiembre 2024
21 Septiembre 2024
20 Septiembre 2024
19 Septiembre 2024