Viking VBO1830 Manual de Usario

Viking No categorizado VBO1830

Lee a continuación 📖 el manual en español para Viking VBO1830 (8 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

Use & Care

MANUAL

Outdoor Stainless Steel Cabinets

VBBO1601 / VBBO2602 / VURO3200 / VBO1811 / VBO1830 / VSBO2402 / VTOP1810

IMPORTANT - PLEASE READ AND FOLLOW

•Before beginning, please read these instructions completely and carefully.

•Do not remove permanently afﬁ xed labels, warnings, or plates from product. This may void the warranty.

• Outdoor stainless steel cabinets are not designed to be water tight. Water may enter cabinetry under certain conditions

•The installer should leave instructions with the consumer who should retain for future reference

•NEVER use LP tanks inside any stainless steel cabinetry. Tanks must be located outside of the cabinetry at all times.

TO INSTALL CABINETS:

1. Verify cabinet product number(s) on box(es) to list of

cabinets ordered.

2. Carefully unpack cabinets making sure not to scratch fronts.

Front panels are protected by plastic coating (that must be

removed after setup). Cabinets with interchangeable doors

are shipped from the factory with opening from left to right

as shown (See illustration #1).

3. In cabinets with interchangeable doors, hardware package

will contain hole covers and hardware to install.

Illustration #1

4. Install 4 legs in the leg plates attached to bottom of each

cabinet. Screw in place. (See illustration #2).

Illustration #2

IMPORTANT - PLEASE READ AND FOLLOW!

5. Place cabinet(s) in approximate ﬁ nal position.

Level cabinets using leveling legs. If installing

two or more cabinets, use 1/2” SMS screws

provided to screw them together. (See

illustration #3).

6. On cabinets with interchangeable left or right hand swing,

determine appropriate hinge side for cabinets. Remove

outside door panel. Install hinges by placing hinge

bracket in hole in door and fasten in place with hardware

provided. Screw hole plate covers in appropriate pre-

drilled holes in cabinet side. Fasten hole covers with

hardware provided. (See Illustration #4).

7. Cabinet doors must be adjusted when cabinets are level

in ﬁ nal position. There are two adjustment screws on the

hinge receiver. (See Illustration #5)

• The front screw is used to center the door in the

opening. Turning the front screws in or out will

center the door over the cabinet opening.

• The back screw is used to align the front of the

door with the cabinet frame and secure the door

to the cabinet. Slightly loosen the screw and slide

door in or out. Retighten the screw to secure the

door.

Illustration #5

Use #8 x 3/8”

(.95 cm) ﬂ at head

M.S. and locknut

to attach hinge

bracket to the

inside door

Use #8 x 3/8”

(.95 cm) M.S.

and locknut

to fasten hole

cover to inside

door panel.

Illustration #3

Install (4) Tinnerman clips

(provided) before fastening

cabinets together.

Mount cabinets with

#10 x 1/2” (1.3 cm)

screws provided.

Back

Screw

Front

Screw

Especificaciones del producto

Marca:	Viking
Categoría:	No categorizado
Modelo:	VBO1830
Color del producto:	Rood
Peso.:	10000 g
Longitud del cable:	9.45 m
tipo de limpieza:	Droog
Tipo de contenedor de aspiradora:	Zakloos
voltaje-de-entrada-de-CA:	120 V