Vitamix Ascent A3300i Manual de Usario
Vitamix
procesador de alimentos
Ascent A3300i
Lee a continuación 📖 el manual en español para Vitamix Ascent A3300i (2 páginas) en la categoría procesador de alimentos. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
PRINTER’S INSTRUCTIONS:
INSTR,INSTL,IRE-1.0 • LINEAR P/N: 223101X20 • INK: BLACK •
MATERIAL: 20LB. GLOSS WHITE PAPER • SIZE: 4.250” X 17.500” FOLD TO 4.250” X 3.500”
• FOLDING: 5 PARALLEL FAN-FOLDS, FINISH WITH LOGO SHOWING • SCALE: 1-1
223101X20 • IMAGE 1
DESCRIPTION
The IRE-1.0 represents the highest level in sophistication for attachable
IR Emitters. It features a unique EZ-Docker
™ port that permits instant
removal of the emitter when rearranging or servicing components.
An improved adhesive reduces callbacks for reattachment of “fallen
emitters”. The case may also be taken apart so that the tiny internal
emitter can be placed inside a component, when desired. High IR
output from the top curved surface allows emitter to be mounted
on a nearby surface, below, above or on a cabinet door, rather than
directly on the sensor of the unit where conditions permit.
ATTACHMENT
First, locate the component’s IR sensor window and (see Note 1)
thoroughly clean it of any fingerprints or other greasy substances.
The EZ-Docker™ port has a clear adhesive layer on its bottom surface.
Peel the protective layer off,
exposing the adhesive.
Orient the port vertical (see
Fig. 2) and press it over the
center of the component’s
sensor window. Press and
hold for several seconds to
ensure maximum contact
of the adhesive.
Slide the emitter from the
top down, into the EZ-
Docker™ port. You should
feel it “snap” into place. (To
remove the emitter at any
time, simply push upward
until it “pops” out).
IRE-1.0
Emitter
8 FT 9/16"
7/16"
3.5mm
mini plug
1/4"
Side View
Emitter
Wire Lead
Docki ng
Port
Clear Adhe sive Tape
(See Note 3)
Top View
NOTE: White striped side is posit ive ( +)
(– )
(+ )
Emitter slides in to
Docki ng Port
TYPICAL INSTALLATION
Satellite Receiver
PS-1.0
IRE-1.0
IRE-1.0
Emitter
IRE-1.0
Emitter
VCR
A/V Receiver
Hand Held
Remote
IRC-3.0
Emitter
IR Sensor
Window
AT-1.0
Amplified Terminator
Unit
Power Supply
120V AC
(unswitched)
Shelf Top
IR Receiver
Fig. 1
Insert the 3.5mm plug into an Emitter jack on a SpeakerCraft
Terminator or other source of IR (see Fig. 3)
.
CAUTION: Do not plug into an emitter jack that is set to Blaster
Power (BL ON) or to the HIGH OUT of other connecting blocks.
To do so will smoke the emitters!!
Note 1: If you have difficulty finding the component’s IR sensor, try
using a flashlight. Sometimes the owner’s manual is helpful. You may
need to contact the manufacturer direct.
Note 2: You may also attach the emitter without the EZ-Docker
™
port. Use one of the spare adhesives (included) applying it directly to
the bottom surface of the IRE-1.0 shell.
Note 3: If you need to remove the EZ-Docker™ port or emitter previ-
ously stuck to a component’s surface, use a fresh adhesive (included)
before reattaching.
Note 4: The emitter shell and EZ-Docker™
port, though dark in
appearance, are transparent to Infrared. This allows IR commands
to pass through them, permitting local hand held remote control as
well as through the IRE-1.0.
Fig. 3
IR Controlled Components
IR sensor
window
Docking Port
IRE-1.0 attached to
IR sensor window
2) Slide EmitterIRE-1.0
end into docking port
1) Attach Docking PortIRE-1.0
to IR sensor window with adhesive pad
Fig. 2
PRINTER’S INSTRUCTIONS:
INSTR,INSTL,IRE-1.0 • LINEAR P/N: 223101X20 • INK: BLACK •
MATERIAL: 20LB. GLOSS WHITE PAPER • SIZE: 4.250” X 17.500” FOLD TO 4.250” X 3.500”
• FOLDING: 5 PARALLEL FAN-FOLDS, FINISH WITH LOGO SHOWING • SCALE: 1-1
223101X20 • IMAGE 2
IR Controlled Components
IR Sensor
Window
Fig. 5a IRE-1.0 attached directly
to IR sensor window
Cabinet Door
Fig. 5b IRE-1.0 attached to inside of
cabinet door directly opposite
IR sensor window
IRE-1.0 attached to shelf directly
below or above IR sensor window
Fig. 5c & d
Fig. 5
Low
output side
toward IR
sensor
Connecting
lead
Emitter
Shell
High
output
side
Internal
IR Emitter
In others, it may be necessary to remove the internal emitter from its
shell so that it will fit in tiny chassis places. In this case, use the thin
edge of a knife to carefully pry the lower cover from the shell of the
emitter. Gently ease the tiny emitter and lead from it’s nest within the
shell. Use heat shrink tubing, or other insulating means, to prevent
shorting of the exposed leads.
Fig. 4
IRE-1.0
IR Emitter
SmartPath™
INSTALLATION INSTRUCTIONS
LIT03100 (rev2)
223101X20
2
940 Columbia Avenue, Riverside, CA 92507 • Phone 1-800-448-0976 • Fax 951-787-8747
www.speakercraft.com
LIMITED 5-YEAR WARRANTY
SpeakerCraft Inc. warrants to the original retail purchaser only that this
SpeakerCraft product will be free from defects in materials and workman-
ship, for a period of 5-years, provided it was purchased from a SpeakerCraft
Authorized Dealer.
Defective products must be shipped, together with proof of purchase,
prepaid insured to the SpeakerCraft Authorized Dealer from whom they
were purchased, or to the SpeakerCraft factory at the address listed on this
installation instruction manual. Freight collect shipments will be refused. It
is preferable to ship this product in the original shipping container to lessen
the chance of transit damage. In any case, the risk or loss or damage in
transit is to be borne by the purchaser. If upon examination at the Factory
or SpeakerCraft Authorized Dealer it is determined that the unit was defec-
tive in materials or workmanship at any time during this warranty period,
SpeakerCraft or the SpeakerCraft Authorized Dealer will, at its option, repair
or replace this product at no additional charge, except as set forth below.
If this model is no longer available and can not be repaired effectively,
SpeakerCraft, at its sole option may replace the unit with a current model of
equal or greater value. In some cases where a new model is substituted, a
modification to the mounting surface may be required. If mounting surface
modification is required, SpeakerCraft assumes no responsibility or liability
for such modification. All replaced parts and product become the property
of SpeakerCraft Inc. Products replaced or repaired under this warranty
will be returned to the original retail purchaser, within a reasonable time,
freight prepaid.
This warranty does not include service or parts to repair damage caused
by accident, disaster, misuse, abuse, negligence, inadequate packing or
shipping procedures, commercial use, voltage inputs in excess of the rated
maximum of the unit, or service, repair or modification of the product which
has not been authorized or approved by SpeakerCraft. This warranty also
excludes normal cosmetic deterioration caused by environmental conditions.
This warranty will be void if the Serial number on the product has been
removed, tampered with or defaced.
This warranty is in lieu of all other expressed warranties. If the product is
defective in materials or workmanship as warranted above, the purchaser’s
sole remedy shall be repair or replacement as provided above. In no event
will SpeakerCraft be liable for any incidental or consequential damages
arising out of the use or inability to use the product, even if SpeakerCraft
Inc. or a SpeakerCraft Inc. Authorized Dealer has been advised of the pos-
sibility of such damages, or for any claim by any other party. Some states
do not allow the exclusion or limitation of consequential damages, so the
above limitation and exclusion may not apply. All implied warranties on the
product are limited to the duration of this expressed warranty. Some states
do not allow limitation on the length of an implied Warranty. If the original
retail purchaser resides in such a state, this limitation does not apply.
Other Emitter Placements
Since the IRE-1.0 has high output from it’s curved top , (See Fig. 4)
you may attach it to other surfaces nearby, if the installation permits.
(See Fig. 5)
Use the higher power setting (NOT Blaster Power) on the connect-
ing block or terminator, if so provided.
Some installers like the option of placing the emitter completely inside
a component, as near as possible to the IR sensor, for a clean external
appearance. In some cases, the whole emitter can be so placed.
ELT03100
SpeakerCraft®
SpeakerCraft®
Especificaciones del producto
Marca: | Vitamix |
Categoría: | procesador de alimentos |
Modelo: | Ascent A3300i |
¿Necesitas ayuda?
Si necesitas ayuda con Vitamix Ascent A3300i haz una pregunta a continuación y otros usuarios te responderán
procesador de alimentos Vitamix Manuales
2 Septiembre 2024
1 Septiembre 2024
31 Agosto 2024
30 Agosto 2024
procesador de alimentos Manuales
- procesador de alimentos Electrolux
- procesador de alimentos Bosch
- procesador de alimentos AEG
- procesador de alimentos Braun
- procesador de alimentos Philips
- procesador de alimentos Panasonic
- procesador de alimentos BEKO
- procesador de alimentos Grundig
- procesador de alimentos Kenwood
- procesador de alimentos Krups
- procesador de alimentos Quigg
- procesador de alimentos Siemens
- procesador de alimentos Tefal
- procesador de alimentos Adler
- procesador de alimentos Ariete
- procesador de alimentos Arendo
- procesador de alimentos Bartscher
- procesador de alimentos Morphy Richards
- procesador de alimentos Shark
- procesador de alimentos GE
- procesador de alimentos Princess
- procesador de alimentos Sharp
- procesador de alimentos Klarstein
- procesador de alimentos Brandt
- procesador de alimentos Omega
- procesador de alimentos Severin
- procesador de alimentos Smeg
- procesador de alimentos Gorenje
- procesador de alimentos Silvercrest
- procesador de alimentos Nedis
- procesador de alimentos Korona
- procesador de alimentos Black And Decker
- procesador de alimentos Breville
- procesador de alimentos KitchenAid
- procesador de alimentos Tristar
- procesador de alimentos Domo
- procesador de alimentos Trisa
- procesador de alimentos Vice Versa
- procesador de alimentos Waring Commercial
- procesador de alimentos OBH Nordica
- procesador de alimentos Manta
- procesador de alimentos Hanseatic
- procesador de alimentos Vox
- procesador de alimentos Oster
- procesador de alimentos ECG
- procesador de alimentos Moulinex
- procesador de alimentos Sinbo
- procesador de alimentos Izzy
- procesador de alimentos Jata
- procesador de alimentos Melissa
- procesador de alimentos Magic Chef
- procesador de alimentos Swan
- procesador de alimentos Emerio
- procesador de alimentos Clatronic
- procesador de alimentos Fritel
- procesador de alimentos Taurus
- procesador de alimentos Russell Hobbs
- procesador de alimentos Sencor
- procesador de alimentos Cuisinart
- procesador de alimentos Concept
- procesador de alimentos Solac
- procesador de alimentos Sunbeam
- procesador de alimentos Teesa
- procesador de alimentos Mesko
- procesador de alimentos Profilo
- procesador de alimentos Gemini
- procesador de alimentos Beper
- procesador de alimentos Mellerware
- procesador de alimentos Schneider
- procesador de alimentos Eldom
- procesador de alimentos Philco
- procesador de alimentos Babymoov
- procesador de alimentos Ninja
- procesador de alimentos DCG
- procesador de alimentos Trebs
- procesador de alimentos Solis
- procesador de alimentos Bourgini
- procesador de alimentos Nordmende
- procesador de alimentos Haier
- procesador de alimentos H.Koenig
- procesador de alimentos Binatone
- procesador de alimentos Steba
- procesador de alimentos Kubo
- procesador de alimentos Beem
- procesador de alimentos Costway
- procesador de alimentos Elba
- procesador de alimentos Zelmer
- procesador de alimentos Nutrichef
- procesador de alimentos Sage
- procesador de alimentos ETA
- procesador de alimentos Champion
- procesador de alimentos Bomann
- procesador de alimentos Hamilton Beach
- procesador de alimentos Buffalo
- procesador de alimentos Wmf
- procesador de alimentos Farberware
- procesador de alimentos Rommelsbacher
- procesador de alimentos Wilfa
- procesador de alimentos Laica
- procesador de alimentos AYA
- procesador de alimentos Brabantia
- procesador de alimentos Camry
- procesador de alimentos Imetec
- procesador de alimentos Sammic
- procesador de alimentos Arzum
- procesador de alimentos Bifinett
- procesador de alimentos Koblenz
- procesador de alimentos Primo
- procesador de alimentos Tower
- procesador de alimentos Comfee
- procesador de alimentos Gastroback
- procesador de alimentos MPM
- procesador de alimentos Rotel
- procesador de alimentos Becken
- procesador de alimentos Sogo
- procesador de alimentos Hobart
- procesador de alimentos ProfiCook
- procesador de alimentos Kambrook
- procesador de alimentos G3 Ferrari
- procesador de alimentos Zephir
- procesador de alimentos Magimix
- procesador de alimentos Efbe-schott
- procesador de alimentos Gourmetmaxx
- procesador de alimentos Kunft
- procesador de alimentos Caso
- procesador de alimentos Dualit
- procesador de alimentos Turmix
- procesador de alimentos Fakir
- procesador de alimentos OXO
- procesador de alimentos C3
- procesador de alimentos Coline
- procesador de alimentos Home Electric
- procesador de alimentos Dynamic
- procesador de alimentos Optimum
- procesador de alimentos Springlane
- procesador de alimentos Beaba
- procesador de alimentos Cecotec
- procesador de alimentos Micromaxx
- procesador de alimentos Dash
- procesador de alimentos Eurochef
- procesador de alimentos Weasy
- procesador de alimentos Gutfels
- procesador de alimentos Turbotronic
- procesador de alimentos Krefft
- procesador de alimentos Eden
- procesador de alimentos Max Pro
- procesador de alimentos Orava
- procesador de alimentos Rösle
- procesador de alimentos Witt
- procesador de alimentos Thermomix
- procesador de alimentos Redmond
- procesador de alimentos Khind
- procesador de alimentos Ankarsrum
- procesador de alimentos Domoclip
- procesador de alimentos Exido
- procesador de alimentos Magnani
- procesador de alimentos Kitchen Crew
- procesador de alimentos Kogan
- procesador de alimentos Sam Cook
- procesador de alimentos Flama
- procesador de alimentos LERAN
- procesador de alimentos DoughXpress
- procesador de alimentos Mistral
- procesador de alimentos Espressions
- procesador de alimentos Koliber
- procesador de alimentos Zeegma
- procesador de alimentos Lund
- procesador de alimentos Berkel
- procesador de alimentos Pacojet
- procesador de alimentos WestBend
- procesador de alimentos GAM
- procesador de alimentos Nemco
- procesador de alimentos Robot Coupe
- procesador de alimentos Ravanson
- procesador de alimentos Kitchen Chef
- procesador de alimentos Smapp
- procesador de alimentos Girmi
- procesador de alimentos Waring
- procesador de alimentos Eurodib
- procesador de alimentos Enkho
- procesador de alimentos Tokit
- procesador de alimentos Kitchenware
- procesador de alimentos Mainstreet Equipment
- procesador de alimentos Philips-Avent
- procesador de alimentos Reber
- procesador de alimentos RoyaltyLine
- procesador de alimentos Sirman
- procesador de alimentos Beautiful
- procesador de alimentos Home Electronics
- procesador de alimentos Studio
- procesador de alimentos Robusta
- procesador de alimentos Nuc Electronics
- procesador de alimentos Major
- procesador de alimentos Catler
- procesador de alimentos Kohersen
- procesador de alimentos Jupiter
- procesador de alimentos Tescoma
- procesador de alimentos Brentwood
- procesador de alimentos Lauben
- procesador de alimentos Electroline
- procesador de alimentos Healthy Choice
- procesador de alimentos Imarflex
- procesador de alimentos Huslog
- procesador de alimentos General Technic
- procesador de alimentos Yamazen
Últimos procesador de alimentos Manuales
27 Octubre 2024
24 Octubre 2024
23 Octubre 2024
23 Octubre 2024
23 Octubre 2024
23 Octubre 2024
23 Octubre 2024
23 Octubre 2024
22 Octubre 2024
22 Octubre 2024