Vitek VTD-C510 Manual de Usario

Vitek No categorizado VTD-C510

Lee a continuación 📖 el manual en español para Vitek VTD-C510 (8 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

BLACK

VITEK

VTD-C510

High Resolution Color

Indoor Dome Camera

The VTD-C510 high resolution color dome camera is a

small, attractive camera ideal for use in commercial or

residential applications. It measures less than 5” in

diameter and comes in dual voltage 24 Volt AC/12 Volt

DC power input for easy integration with standard

cameras and power systems.

•1/3" High Resolution CCD (768 x 494)

•580 TV Lines Resolution

•DSP Controls For Superior Backlight, White Balance, And

Gain Control

•0.03 Lux Sensitivity

•Dual Voltage: 12VDC / 24VAC

•Also available in white

WIRING CONNECTIONS

The VTD-C510 Dome Camera should be powered by 12 Volts DC or 24 Volts AC. You

should make sure that the power supply you are using is CSA Certified Class 2 Power

Supply delivering a minimum of 2.5 Watts.

For optimum video signal, use 95% copper shielded coax cable. Twisted pair or CAT-5E

cable may also be used with optional VT-TR1M Passive Video Transceivers. Maximum cable

distance for 95% copper braid coax is approximately. 800’; For Cat-5E or twisted pair, 1500’

using VT-TR1M transceivers, and up to 4500’ with use of VT-TR16AI Active UTP hub.

BLACK

BLACKBLACK

CAMERA SETUP

DIP SWITCH SETTINGS

Your VTD-C510 Dome Camera has been set at average default settings from the factory so

the performance should be excellent right from the start. However, certain challenging

environments may require additional set-up procedures to enhance the image.

There are four dip switches on the rear board of

the camera. The following adjustments may be

made:

Dip Switch Adjustments

AE: Automatic Electronic Shutter Control

Leave this switch in the “On” position when using a fixed lens

version to enhance the camera’s ability to react to changing light.

Switch to “Off” position if your camera has an auto iris lens.

BLC: Back Light Compensation

Leave this switch in the “Off” position if your camera is being

installed outdoors or if the installation is indoors in a controlled

lighting environment.

Switch to “On” position when installing the camera indoors looking

toward windows or doors or if outdoors looking into semi-direct

sunlight. Never install camera looking into direct sunlight.

FL: Flickerless

Flickerless shutter speed for minimizing image flicker under

fluorescent lighting.

AGC: Automatic Gain Control

Used to increase the video signal in low light conditions. If used in

the wrong environment, this setting can add noise in the picture

giving a grainy appearance.

Dip Switch 1

(Default ON)

Dip Switch 2

(Default OFF)

Dip Switch 3

(Default OFF)

Dip Switch 4

(Default OFF)

Especificaciones del producto

Marca:	Vitek
Categoría:	No categorizado
Modelo:	VTD-C510
Peso.:	1040 g
Ancho:	85 mm
Profundidad:	210 mm
Altura:	46 mm
Certificados de sostenibilidad:	RoHS
Cantidad por paquete:	12 stuk(s)
Voltaje de entrada:	80 - 264 V
Potencia de salida:	220 W
Corriente de salida:	15 A
Abarcando:	12 V