Vonyx LM54 Manual de Usario

Vonyx Vocero LM54

Lee a continuación 📖 el manual en español para Vonyx LM54 (20 páginas) en la categoría Vocero. Esta guía fue útil para 15 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/20

LM-Series Light Motion Speaker

Ref. nr.: 178.610; 178.613

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

GEBRAUCHSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.3

ENGLISH

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to

benet fully from all features.

Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions

to avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the product, please ask advice from a

specialist. When the product is switched on for the rst

time, some smell may occur. This is normal and will

disappear after a while.

- The product contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the

product. This may cause electrical shock and

malfunction.

- Do not place the product near heat sources such as

radiators, etc. Do not place the product on a vibrating

surface. Do not cover the ventilation holes.

- The product is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the product from a mains outlet,

always pull the plug, never the lead.

- Do not plug or unplug the product with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the product is damaged to such an extent that internal

parts are visible, do NOT plug the product into a mains

outlet and DO NOT switch the unit on. Contact your

dealer. Do NOT connect the product to a rheostat or

dimmer.

- To avoid re and shock hazard, do not expose the

product to rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the product to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the product will not be used

for a longer period of time, unplug it from the mains. The

rule is: Unplug it from the mains when not in use.

- If the oduct has not been used for a longer period of pr

time, condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the

product in humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the product on and o. This

shortens the life time.

- Keep the product out of the reach of children. Do not

leave the product unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- his product is with speaker inside which can cause If t

magnetic eld. Keep the product at least 60cm away

from computer or TV.

- If this product have a built-in lead-acid rechargeable

battery. Please recharge the battery every 3 months if

you are not going to use the product for a long period of

time. Otherwise the battery may be permanently

damaged.

- If the battery is damaged please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- If the product has fallen, always have it checked by a

qualied technician before you switch the product on

again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the product with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the product o prior to unplugging it from the

mains and/or other equipment. Unplug all leads and

cables prior to moving the product.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this product.

- Keep the original packing material so that you can

transport the product in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that p2-he should

read and adhere to.

The product has been certied CE. It is prohibited to make any changes to the product. They would invalidate the CE certicate

and their guarantee!

NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed The specications are typical. The actual values can slightly change from one unit to the other. .

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also

invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the

warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are

present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if

any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing

materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original

factory box and packing.

If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The

arising condensation water might damage your device. Leave the device switched o until it has reached room temperature.

POWERSUPPLY

On the label on the backside of the produ is indicated on this type of power supply must be connected. Check that the mains ct

voltage corresponds to this, all other voltages than specied, the product can be irreparably damaged. The product must also be

directly connected to the mains and may be used. No dimmer or adjustable power supply.

Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate

electrical ground to avoid the risk of electrocution or re.

OVERVIEW

1. Mode

Turn this knob to select the mode for the on the front LED’s

2. Colour

See table below

3. Sensitivity / Speed

See table below

Function

selector

LED output

description

Sound

controlled

Colour

potentiometer

Sensitivity

potentiometer

Mood

Auto change No - -

Meter

"VU meter"

single colour

Yes Colour select -

Mix

"VU meter"

multi colour

Yes - -

Pulse

Strobe Yes Colour select Sound sensitivity

Party

Change No - Speed

4. Mediaplayer

Mediaplayer for playing MP3 songs via USB, SD or BT

technology.

5. Level Mic / Line1

Volume control for the microphone line 1 input. or

6. Level Player / Line 2

Volume control for the player and line 2 input.

7. Treble

Adjust high tone control.

8. Bass

Adjust low tone control.

9. MIC / Line 1 Input

XLR jack input for connecting microphone or audio source with

line level output (e.g. mixer, CD player)

10. RCA Line 2 Input

RCA jack input for connecting audio source with line level

output (e.g. mixer, CD player)

11. Jack 3.5 Line 2 Input

3.5mm (1/8" jack to connect an audio source to line 2. )

12. Link output

XLR jack output for connecting another active loudspeaker.

13. Player / Line 2 Switch

Press this button to select between Player or Line 2 input.

14. LED Power

Indicator lights up when power turned on.

15. Power On/O

Turns the loudspeaker on/o. Make sure the volume knob is set to minimum before turning it on.

16. Power Input

Connect the included power cable to this input and connect the other end of the cable to a power source.

Especificaciones del producto

Marca:	Vonyx
Categoría:	Vocero
Modelo:	LM54
Tipo de operación:	Knoppen
Color del producto:	Grijs
Peso.:	7540 g
Ancho:	505 mm
Profundidad:	240 mm
Altura:	345 mm
Amable:	Automatische naaimachine
Activos:	100 W
Mostrar.:	LCD
Tipo de comida:	Electrisch
Estuche de almacenamiento:	Ja
Luz incorporada:	Ja
Manejas):	Nee
voltaje-de-entrada-de-CA:	127/220 V
Funciones de la máquina de coser:	Naaiwerk
brazo libre:	Ja
Cantidad de patrones de puntadas:	300
Bobina de ajuste rápido:	Ja
Incluye accesorios para máquinas de coser.:	Blind stitch foot, Button sewing foot, Buttonhole foot, Zigzag foot, Zipper foot
Número de fuentes:	2
Velocidad de costura:	1050 steken per minuut
Longitud de sutura:	Variabel
Incluye almohadillas de fieltro para pasadores de bobina.:	Ja
Longitud de puntada ajustable:	Ja
pedal de control de pie:	Ja
Número de ojales:	9
Pie prensatelas universal incluido.:	Ja
Destripador de costuras incluido:	Ja
Incluye destornillador:	Ja
Costuras de dobladillo invisible:	Ja
Cortadores de alambre incluidos:	Ja