Vonyx SPJ-1000ABT Manual de Usario

Vonyx Vocero SPJ-1000ABT

Lee a continuación 📖 el manual en español para Vonyx SPJ-1000ABT (16 páginas) en la categoría Vocero. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
SPJ -End Active Speaker Series /USB/SD Hi BT
Ref. nr.: 178.045 / 178.042 / 178.041 / 178.040
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
GEBRAUCHSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
V1.3
2
ENGLISH
Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to
benet fully from all features.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions
to avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the product, please ask advice from a
specialist. When the product is switched on for the rst
time, some smell may occur. This is normal and will
disappear after a while.
- The product contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the
product. This may cause electrical shock and
malfunction.
- Do not place the product near heat sources such as
radiators, etc. Do not place the product on a vibrating
surface. Do not cover the ventilation holes.
- The product is not suitable for continuous us e.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the product from a mains outlet,
always pull the plug, never the lead.
- Do not plug or unplug the product with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualied technician.
- If the product is damaged to such an extent that internal
parts are visible, do NOT plug the product into a mains
outlet and DO NOT switch the unit on. Contact your
dealer. Do NOT connect the product to a rheostat or
dimmer.
- To avoid re and shock hazard, do not expose the
product to rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the product to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the product will not be used
for a longer period of time, unplug it from the mains. The
rule is: Unplug it from the mains when not in use.
- If the product has not been used for a longer period of
time, condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the
product in humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the product on and o. This
shortens the life time.
- Keep the product out of the reach of children. Do not
leave the product unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- his product is with speaker inside which can cause If t
magnetic eld. Keep the product at least 60cm away
from computer or TV.
- If the product has built-in lead-acid rechargeable battery.
Please recharge the battery every 3 months if you are
not going to use the unit for a long period of time. Or the
battery may be damaged.
- If the battery is damaged please replace with same
specications battery. And dispose the damaged battery
environment friendly.
- If the product has fallen, always have it checked by a
qualied technician before you switch the product on
again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the product with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the product o prior to unplugging it from the
mains and/or other equipment. Unplug all leads and
cables prior to moving the product.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this product.
- Keep the original packing material so that you can
transport the product in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that p2-he should
read and adhere to.
The product has been certied CE. It is prohibited to make any changes to the product. They would invalidate the CE certicate
and their guarantee!
NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also
invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the
warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
3
CONTROLS AND CONNECTIONS
1. Microphone Inputs
XLR and 6.3mm ¼” input jack for connecting a
microphone.
2. Line Inputs
XLR and RCA jack input for connecting audio units
with line level output (e.g. mixer, CD player)
3. Line Outputs
XLR and 6.3mm ¼” output jack for connecting an
extra active speaker or audio unit with line level
input.
4. Microphone Level
Adjust the signal level of microphone.
5. Line Level
Adjust the signal level of line input.
6. Master Volume
Adjust the overall output level of the portable sound
set.
7. Treble
Adjust high tone control.
8. Bass
Adjust low tone control.
9. Clip Indicator
Indicator lights up when signal level is too high.
When the LED light up continually you must reduce
the volume to protect the speaker.
10. Power Indicator
Indicator lights up when power turned on.
11. Mode button
Press the button to select BT/USB/SD
function. Press for 2 seconds to turn the
mediaplayer On or O.
12. Play butt on
For switching between play and pause.
13. Folder button
Press this button to open the folder map of
USB or SD-card.
14. Repeat button
Press key for repeating of single track or
all tracks.
15. Forward - Backward button
For title selection (short actuation) and increase or decrease volume (long actuation).
16. SD port
Connect your SD/MMC devices to this slot to play music with MP3 or WMA format.
17. USB port
Connect your USB devices to this slot to play music with MP3 or WMA format.
18. MP3 Level
Adjust the level of media player.
CONNECT BT-DEVICE
1. Set the search function on of the BT device you want to play the music. See the operating
instructions for that device..
2. -function of media player Press the “MODE” button and activate BT .
3. Find on your BT- he connection device “VONYX SPJ” and make t
If password is required, you can enter "0000".

Especificaciones del producto

Marca: Vonyx
Categoría: Vocero
Modelo: SPJ-1000ABT

¿Necesitas ayuda?

Si necesitas ayuda con Vonyx SPJ-1000ABT haz una pregunta a continuación y otros usuarios te responderán




Vocero Vonyx Manuales

Vocero Manuales

Últimos Vocero Manuales