Vortex CROSSFIRE II Manual de Usario

Vortex Prismáticos CROSSFIRE II

Lee a continuación 📖 el manual en español para Vortex CROSSFIRE II (5 páginas) en la categoría Prismáticos. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
Objective Lens
Ocular Lens
Twist-up Eyecup
Strap
Attachment
Tripod Adapter Socket
Center Focus
Diopter
IPD
The eyecups on a Cross re®II binocular twist up and down so any
viewer can see the full eld and enjoy comfortable viewing—with
or without eyeglasses.
When not using eyeglasses or
sunglasses, keep the eyecups fully
extended. For the best viewing
when viewing through eyeglasses,
twist eyecups down.
Adjust the interpupillary distance
The interpupillary distance (IPD) is the distance between the centers
of the left and right eye pupils. Match the IPD of your eyes to that of
the binocular so that you see a single image that is free of shading.
BASIC OPERATION
Adjust the eyecups
Rotate the binocular barrels
inward or outward to line your
eyes up with ocular lenses.
Distance between the centers
of the ocular lenses.
32
Properly focus the binocular
For the best views, follow this two-step process to properly adjust
the center focus and diopter. Choose an object that is about
20 yards away from you and stay in the same spot until you have
adjusted the binocular for your eyes.
1. Adjust the center focus—start by closing your right eye
or covering the right objective lens
with your hand. Focus your left eye
on the object and adjust the center
focus wheel until the image is in focus.
Leave the center focus in this position
as you adjust the diopter.
2. Adjust the diopter—start by closing your left eye or covering
the left objective lens with your hand.
Look through your right eye and adjust
the diopter ring (found on the right
eyepiece) until the object is in focus.
Make note of this diopter setting in
case you need to set it again. From this
point on, you will only need to use the center focus wheel.
The Crossfire II comes with a rainguard for the ocular lenses and
tethered objective lens covers. Use these covers to protect the
lenses whenever you are not viewing.
Lens Covers
The Crossfire II binocular’s protective case provides safe storage
between viewing sessions.
Carry Case
ACCESSORIES
Attach the padded neckstrap to the Crossfire II in three simple
steps. Begin with the right barrel of the binocular and repeat the
process for the left barrel.
Neckstrap
1. Push a few inches
of the strap through
the strap attachment
on the binocular.
3. Adjust the overall
length, then pull the
tight until strap secured
within the buckle.
2. Hold the buckle
and thread the end of
the strap through the
buckle.
Note: If using another type of strap, never attach the metal o-rings
directly onto the strap attachment.
54

Especificaciones del producto

Marca: Vortex
Categoría: Prismáticos
Modelo: CROSSFIRE II

¿Necesitas ayuda?

Si necesitas ayuda con Vortex CROSSFIRE II haz una pregunta a continuación y otros usuarios te responderán




Prismáticos Vortex Manuales

Prismáticos Manuales

Últimos Prismáticos Manuales