Wagner SprayTech FLEXiO 590 Manual de Usario

Wagner SprayTech pulverizador de pintura FLEXiO 590

Lee a continuación 📖 el manual en español para Wagner SprayTech FLEXiO 590 (21 páginas) en la categoría pulverizador de pintura. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/21

EnglishFrançaisEspañol

0113 • Form No. 0529835B

Owner’s Manual

Read this manual for complete instructions

Français (page 17) / Español (página 33)

Contents

2 Important Safety Information

4Controls and Functions

6Material Preparation

7Assembly

8 Air and Material Controls

9 Spray Pattern Adjustment

10 Proper Spraying Technique

12 Cleanup

14 Reassembly

15 Maintenance

16 Troubleshooting

49 Parts List

56 Warranty

Questions?

Call Wagner Technical Service at:

1-800-328-8251

www.wagnerspraytech.com

English

Important Safety Information

Read all safety information before

operating the equipment. Save these

instructions.

Indicates a hazardous situation which,

if not avoided, could result in death or

serious injury.

To reduce the risks of re or explosion,

electrical shock and the injury to

persons, read and understand all

instructions included in this manual. Be

familiar with the controls and proper

usage of the equipment.

Grounding Instructions

This product must be grounded. In the event of an

electrical short circuit, grounding reduces the risk

of electric shock by providing an escape wire for

the electric current. This product is equipped with a

cord having a grounding wire with an appropriate

grounding plug. The plug must be plugged into an

outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

WARNING - Improper installation of

the grounding plug can result in a risk

of electric shock.

If repair or replacement of the cord or plug is

necessary, do not connect the green grounding wire

to either at blade terminal. The wire with insulation

having a green outer surface with or without yellow

stripes is the grounding wire and must be connected

to the grounding pin.

Check with a qualied electrician or serviceman

if the grounding instructions are not completely

understood, or if you are in doubt as to whether the

product is properly grounded. Do not modify the

plug provided. If the plug will not t the outlet, have

the proper outlet installed by a qualied electrician.

This product is for use on a nominal 120 volt

circuit and has a grounding plug that looks like

the plug illustrated below. Make sure that the

product is connected to an outlet having the same

conguration as the plug. No adapter should be

used with this product.

Grounded Outlet

Grounding Pin

Cover for grounded outlet box

WARNING - To reduce the risk

of re or explosion:

1. Do not spray ammable or combustible

materials near an open ame, pilot lights

or sources of ignition such as hot objects,

cigarettes, motors, electrical equipment and

electrical appliances. Avoid creating sparks

from connecting and disconnecting power

cords.

2. For use with only water-based or mineral

spirit-type materials with a minimum ash point

of 21ºC (70º F) — Do not spray or clean with

liquids having a ash point of less than 21ºC

(70º F). Flash point is the temperature at which

a uid can produce enough vapor to ignite.

3. Verify that all containers and collection systems

are grounded to prevent static discharge.

4. Connect to a grounded outlet and use

grounded extension cords (electric models

only). Do not use a 3 to 2 adapter.

5. Keep spray area well ventilated. Keep a good

supply of fresh air moving through the area

to keep the air within the spray area free from

accumulation of ammable vapors.

6. Do not smoke in the spray area.

7. Do not operate light switches, engines, or

similar spark producing products in the spray

area.

8. Keep area clean and free of paint or solvent

containers, rags, and other ammable materials.

9. Know the contents of the paint and solvents

being sprayed. Read all Material Safety Data

Sheets (MSDS) and container labels provided

with the paints and solvents. Follow the paint

and solvent manufacture’s safety instructions.

10. Fire extinguisher equipment shall be present

and working.

English

Important Safety Information

WARNING - To reduce the risk of

injury:

1. Always wear appropriate gloves, eye protection,

clothing and a respirator or mask when

painting. Hazardous vapors – Paints, solvents,

insecticides, and other materials can be harmful

if inhaled or come in contact with body. Vapors

can cause severe nausea, fainting or poisoning.

2. Do not operate or spray near children. Keep

children away from equipment at all times.

3. Do not overreach or stand on an unstable

support. Keep eective footing and balance at

all times.

4. Stay alert and watch what you are doing.

5. Do not operate the unit when fatigued or under

the inuence of drugs or alcohol.

6. Never aim spray gun at any part of the body.

7. Follow all appropriate local, state, and national

codes governing ventilation, re prevention,

and operation.

8. The United States Government Safety Standards

have been adopted under the Occupational

Safety and Health Act (OSHA). These standards,

particularly part 1910 of the General Standards

and part 1926 of the Construction Standards

should be consulted.

9. Use only manufacturer authorized parts. User

assumes all risks and liabilities when using parts

that do not meet the minimum specications

and safety devices of the turbine manufacturer.

10. Power cord must be connected to a grounded

circuit.

11. Do not spray outdoors on windy days.

WARNING - To reduce the risk of

electric shock:

1. Always remove turbine before cleaning.

2. Power cord must be connected to a grounded

circuit.

3. Never submerge electrical parts.

4. Never expose the equipment to rain. Store

indoors.

5. Keep electrical cord plug and spray gun trigger

free from paint and other liquids. Never hold

the cord at plug connections to support the

cord. Failure to observe may result in an

electrical shock.

Important Electrical

Information

Use only a 3-wire extension cord that has a 3-blade

grounding plug and a 3-slot receptacle that will

accept the plug on the product. Make sure your

extension cord is in good condition. When using an

extension cord, be sure to use one heavy enough

to carry the current your product will draw. An

undersized cord will cause a drop in line voltage

resulting in loss of power and overheating. A 14

gauge or 12 gauge cord is recommended. If an

extension cord is to be used outdoors, it must be

marked with the sux W-A after the cord type

designation. For example, a designation of SJTW-A

would indicate that the cord would be appropriate

for outdoor use.

IMPORTANT:

Household use only. Intended

for indoor/outdoor use ONLY with materials

having ashpoint above 70ºF (21ºC).

Thank you for your purchase!

Thank you for purchasing the Wagner FLEXiO sprayer with best-in-class features

that are designed for spraying residential paint, un-thinned, indoors or out.

Only the FLEXiO sprayers have the power of the X-Boost® turbine and versatility

of the iSpray nozzle that will help you nish projects fast and professionally.

They are easy to use right out of the box and with low overspray and less

clogging you will enjoy the exibility to tackle all the painting projects on your

list. We appreciate your feedback, so please visit our website and write a review

on the FLEXiO handheld sprayer so we can continue to learn and improve our

products.

Just click on www.wagnerexio.com

Especificaciones del producto

Marca:	Wagner SprayTech
Categoría:	pulverizador de pintura
Modelo:	FLEXiO 590
Tipo de operación:	Draaiknop
Color del producto:	Black, White
Número de niveles de potencia:	2
Fuente de calor:	Electrisch
Amable:	Halogeen-elektrisch verwarmingstoestel
Material de la carcasa:	Metaal
Activos:	2000 W
Mostrar.:	Nee
Termostato ajustable:	Ja
Protección contra sobrecalentamiento:	Ja
Manejas):	Ja
voltaje-de-entrada-de-CA:	230 V
Nivel de ruido ventilación (máx.):	50 dB
Capacidad de calentamiento:	2000 W
Opciones de colocación:	Vloer
Potencia de calefacción (mín.):	1000 W