Waring Commercial WFP14SW Manual de Usario

Waring Commercial procesador de alimentos WFP14SW

Lee a continuación 📖 el manual en español para Waring Commercial WFP14SW (27 páginas) en la categoría procesador de alimentos. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/27

WFP11SW and WFP14SW

For your safety and continued enjoyment of this product,

always read the instruction book carefully before using.

An que ce produit vous procure en toute sécurité beaucoup de satisfaction,

lisez toujours soigneusement les directives avant de l’utiliser.

Para su seguridad y para disfrutar plenamente de este producto,

siempre lea las instrucciones cuidadosamente antes de usarlo.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should

always be followed including the following:

1. READ ALL INSTRUCTIONS.

2. Always unplug from outlet when not in use, before

putting on or taking off parts, before removing food

from work bowl, and before cleaning. To unplug, grasp

plug and pull from electrical outlet. Never pull cord.

3. Blades are sharp. Handle carefully.

4. Your Waring® batch processor is a piece of kitchen

equipment and, as with all other kitchen equipment,

extreme care must be used when operating it. Although

training requirements are minimal, only responsible and

prudent individuals should be allowed to operate this

batch processor. It should not be used by or near children

or individuals with certain disabilities.

5. To avoid injury, never place cutting blade on base without

rst having put the bowl properly in place.

6. Keep hands as well as spatulas and other utensils away

from moving blades while processing food to prevent the

possibility of severe personal injury or damage to the batch

processor. A plastic scraper may be used, but must be

used only when the batch processor is not running.

7. To protect against risk of electrical shock, do not put base

in water or other liquids.

8. Avoid contact with moving parts.

9. Make sure motor has completely stopped before removing

the lid.

10. Do not operate any appliance with a damaged cord or

plug, or after appliance has been dropped

or damaged in any manner. Return appliance to the nearest

authorized Waring service facility for

examination, repair or adjustment.

11. The use of attachments not recommended or sold by

Waring may cause re, electric shock or injury.

GROUNDING INSTRUCTIONS

For your protection, this appliance is equipped with a

3-conductor cordset.

120-volt units are supplied with a molded 3-prong grounding-type

plug (NEMA 5-15P) and should be used in combination with a

properly connected grounding type outlet as shown in Figure 1.

If a grounding type outlet is not available, an adapter, shown in

Figure 2, may be utilized to enable a 2-slot wall outlet to be used

with a 3-prong plug, except in Canada and Europe.

Referring to Figure 3, the adapter must be grounded by attaching

its grounding lug under the screw of the outlet cover plate.

CAUTION: Before using an adapter, it must be determined that

the outlet cover plate screw is properly grounded. If in doubt,

consult a licensed electrician. Never use an adapter unless you

are sure it is properly grounded.

NOTE: Use of an adapter is not permitted in Canada and Europe.

Green/Yellow: Earth Ground • Blue: Neutral • Brown: Live

Note: User-installed cord set plugs are not permitted in Europe.

INTRODUCTION

Especificaciones del producto

Marca:	Waring Commercial
Categoría:	procesador de alimentos
Modelo:	WFP14SW
Color del producto:	Zwart
Pantalla incorporada:	Ja
Peso.:	11500 g
Ancho:	490 mm
Profundidad:	420 mm
Altura:	380 mm
Material de la carcasa:	Polyvinyl chloride (PVC), Steel
Actual:	2 A
Puerto USB:	Ja
red LAN:	Nee
Lector de tarjetas de memoria integrado:	Ja
Tarjetas de memoria compatibles:	SD
Kijkglas:	Ja
Temperatura de almacenamiento:	0 - 32 °C
tecnología de impresión:	Fused Filament Fabrication (FFF)
Incluye tarjeta de memoria:	SD
voltaje-de-entrada-de-CA:	100-240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Temperatura de funcionamiento (TT):	15 - 32 °C
Material de impresión:	ABS, Polylactic acid (PLA)
Tamaño máximo de impresión:	285 x 153 x 155 mm
Espesor de capa (mín.):	- mm
Espesor de capa (máx.):	- mm
Formatos de archivo de modelo admitidos:	obj, stl, thing