Warwick Gnome Manual de Usario

Lee a continuación 📖 el manual en español para Warwick Gnome (5 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
MANUAL
Warwick Amplification Gnome Series
Bass Amplifier Heads
Gnome Gnome i Gnome i Pro· ·
War
Introduction
Thank you for purchasing a Warwick amplier - clear, dened bass sound, true power and a built-in USB audio interface on the Gnome Gnome i
and Gnome i Pro models - all packed in a super compact, lightweight design that will easily t in your pocket! The amp heads were Gnome
developed to oer transparent, crisp and noise-free performance combined with an ultra-portable, lightweight design in an aordable and
reliable amp for discerning musicians and for the seasoned professionals.
The Warwick Gnome i Gnome i Pro and oer an easy-to-use audio interface without any special driver or software requirements. The USB audio
interface allows you to connect your amp to a PC, MAC or compatible mobile device to record your playing or to process your signal using Gnome
digital audio software plug-ins.
Precautions / Safety Instructions
Power Supply
The Warwick Gnome is powered by an IEC power cable, which provides AC power to the unit. Connect the IEC power cable to provide power.
Improper line voltage can cause serious damage to the unit, always check the line voltage marking on the amplier before you connect the IEC
power cable. Unplug the unit when not in use or during electrical storms.
Connections
Always turn o power to all other equipment before connecting or disconnecting. This will help to prevent malfunction and damage to any of
the devices used.
Cleaning
Clean only with a soft, dry cloth.
Handling
Do not apply excessive force to the switches or controls. Do not block any ventilation openings. Install in accordance to the instructions. Do not let
paper, metal, dirt or other objects come into contact with the device or its connections. Take care not to drop the device and do not subject it to
shock or excessive pressure. The unit should be connected to a mains socket outlet with a protective earthing connection. Replace fuse with rated
value, never bridge defective fuses. Before changing fuse disconnect power cable from unit! To avoid deformation, discoloration, or other serious
damage, do not expose this unit to any of the following conditions:
Direct sunlight
Strong magnetic elds
Excessively dusty or dirty environments
Strong vibration or shock
Heat sources
Extreme temperature
High humidity or moisture
War
1 2 3 5 6 7
Front Panel Description
1. Input Jack: Accepts 6.35 mm ( “) audio jacks for connecting active or passive basses. If you use eects pedals, connect the output /
from the last unit in the signal chain here. We recommend using high quality instrument cables for best sonic performance and reliable
connection.
2. Signal LED: The LED will light up green when the instrument signal passes the preamp without any compression. Higher input levels and
gain settings will activate the built-in compressor / limiter to prevent clipping in the pre-amp stage. The LED will light up red to indicate
active compression. The compressor also tracks changes made to the EQ settings, therefore an increase in an EQ setting might require a
decrease in the Gain setting to maintain the same amount of compression.
3. Gain: Adjusts the input gain of the pre-amp stage.
4. 3-Band EQ: The active tone control EQ section provides up to +/- 15 dB cut or boost for each band. All controls set to center position
(12 o‘clock) will provide a at EQ, turning the knobs clockwise will boost the frequency band, turning the controls counterclockwise will
cut the frequency band.
5. Master: The master volume control sets the signal level for the power output stage and the speaker output on the back of the Gnome
amplier. Set Master completely counterclockwise before you turn on the amplier and increase the control slowly until you reach the
desired volume level. A built-in limiter will prevent power amplier clipping when maximum power is detected.
6. Power LED: GnomeThe LED will light up green when the is powered and turned on.
7. Headphone Jack: Accepts headphones with 6.35 mm ( “) audio jacks. Silent practicing is possible if you disconnect the speaker output /
and input your headphones. Silent practicing without connected load will not cause any damage to the amplier.
4

Especificaciones del producto

Marca: Warwick
Categoría: No categorizado
Modelo: Gnome

¿Necesitas ayuda?

Si necesitas ayuda con Warwick Gnome haz una pregunta a continuación y otros usuarios te responderán




No categorizado Warwick Manuales

No categorizado Manuales

Últimos No categorizado Manuales