Wavtech linkDQ Manual de Usario

Lee a continuación 📖 el manual en español para Wavtech linkDQ (14 páginas) en la categoría Convertidor de audio/video. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/14
WIDTH
PARAMETRIC EQ
BOOST FREQ
NAR WIDE
3 50
(dB)12 (Hz)
30 80
Owners Manual
www.wavtech-usa.com
Parametric EQ ŸRLC ReadyAuto Turn-On
Ÿ
2-Channel LOC / Line Driver
Any function that requires your DO NOT DRIVE WHILE DISTRACTED.
prolonged attention should not be performed while driving. Always stop the
vehicle in a safe location before performing any such function. Failure to do so
may result in an accident.
KEEP THE VOLUME AT MODERATE LEVELS WHILE DRIVING. Excess
volume levels can obscure sounds such as emergency vehicle sirens or road
warning signals and may result in an accident. Continuous exposure to high
sound pressure levels may cause permanent hearing loss. Use common sense
and practice safe sound.
FOR USE WITH 12V NEGATIVE GROUND VEHICLE APPLICATIONS ONLY.
Using this product other than in its designed application may result in fire,
injury or product damage.
MAKE THE CORRECT WIRING CONNECTIONS AND USE PROPER FUSE
PROTECTION. Failure to connect wiring correctly or use appropriate fuse
protection may result in re, injury or product damage . Ensure proper fusing
of all system power wiring and install a 1-ampere in-line fuse (not included)
with the +12V lead to the unit’s power supply connector.
DISCONNECT THE NEGATIVE BATTERY TERMINAL BEFORE
INSTALLATION. Failure to do so may result in fire, injury or damage to the
unit.
D O NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING
OBJECTS. Arrange wiring and cables to prevent obstructions when driving.
Cables or wiring that obstruct or hang up on places such as steering wheel,
brake pedals, etc. can be extremely hazardous.
DO NOT DAMAGE VEHICLE SYSTEMS OR WIRING WHEN DRILLING HOLES.
When drilling holes in the chassis for installation, take precautions so as not to
contact, puncture or obstruct brake lines, fuel lines, fuel tanks, electrical
wiring, etc. Failure to take such precautions may result in fire or an accident.
DO NOT UTILIZE OR CONNECT TO ANY PART OF VEHICLE SAFETY
SYSTEMS. Bolts, nuts or wires used in the brake, airbag, steering or any other
safety-related systems or fuel tanks should NEVER be used for mounting,
power or ground connections. Using such parts may disable control of the
vehicle or result in fire.
WARNING
WARNING
This symbol means important instructions.
Failure to heed them can result in serious injury or death.
CAUTION This symbol means important instructions.
Failure to heed them can result in injury or property damages.
1
STOP USE IMMEDIATELY IF A PROBLEM OCCURS. Failure to do so may
result in personal injury or damage to the product. Return it to your
authorized Wāvtech dealer.
HAVE AN EXPERT DO THE WIRING AND INSTALLATION. This unit requires
special technical skill and experience for wiring and installation. To insure
safety and proper function, always contact the authorized dealer where you
purchased the product to have it done professionally.
INSTALL THE UNIT SECURELY WITH SPECIFIED PARTS. Be sure to use only
the included parts and specified installation accessories (not included). Use of
other than designated parts may damage this unit. Install the unit securely so
that it will not come loose during a collision or sudden jolt.
ROUTE WIRING AWAY FROM SHARP EDGES AND MOVING PARTS. Arrange
cables and wiring away from sharp or pointed edges and avoid moving parts
such as seat hinges or rails to prevent pinching or wear. Use loom protection
where appropriate and always use a grommet for any wiring routed through
metal.
NEVER RUN SYSTEM WIRING OUTSIDE OR UNDERNEATH THE VEHICLE.
All wiring must be routed, secured and protected inside the vehicle. Failure to
do so may result in fire, injury or property damage.
INSTALL THE UNIT IN A DRY AND VENTILATED LOCATION. Avoid
mounting locations where the unit will likely be exposed to high moisture or
heat without adequate ventilation. Moisture penetration or heat buildup may
result in product failure.
REDUCE GAIN AND SOURCE VOLUME TO MINIMUM LEVELS FOR INITIAL
SYSTEM TUNING AND BEFORE CONNECTION TO AN AMPLIFIER. Ensure
amplifier power is off before connecting RCA cables and follow proper system
gain setting procedures. Failure to do so may result in damage to the amplifier
and/or connected components.
CAUTION
Package Contents:
Main Unit Terminals
Accessories Required for
Installation :(not included)
Mounting Tabs
(detachable)
ŸRCA Interconnects
Ÿ18AWG Wire
ŸIn-line Fuse Holder w/1A fuse
ŸBattery Ring Terminal
ŸWire Crimp Connectors
ŸGrommets and Loom
ŸCable Ties
ŸMounting Screws
PWR/SPK GND
2
50

Especificaciones del producto

Marca: Wavtech
Categoría: Convertidor de audio/video
Modelo: linkDQ

¿Necesitas ayuda?

Si necesitas ayuda con Wavtech linkDQ haz una pregunta a continuación y otros usuarios te responderán




Convertidor de audio/video Wavtech Manuales

Convertidor de audio/video Manuales

Últimos Convertidor de audio/video Manuales