Wells BWB1SE Manual de Usario

Wells máquina para hacer gofres BWB1SE

Lee a continuación 📖 el manual en español para Wells BWB1SE (20 páginas) en la categoría máquina para hacer gofres. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/20

WELLS MANUFACTURING

10 Sunnen Dr., St. Louis, MO 63143

telephone: 314-678-6314

fax: 314-781-2714

www.wellsbloomfield.com

IMPORTANT: DO NOT DISCARD THIS MANUAL

This manual is considered to be part of the appliance and is to be given to the OWNER or

MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of

this appliance. Additional manuals are available from your WELLS DEALER.

THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR

INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any

questions concerning installation, operation or maintenance of this equipment.

OWNERS MANUAL

BELGIAN

WAFFLE

BAKER

MODEL

BWB-1S

BWB1SE

Includes

INSTALLATION

USE & CARE

EXPLODED VIEW

PARTS LIST

WIRING DIAGRAM

211

p/n Rev. E M211 08262M-307154 14

Model BWB-1S

M211 2M-307154 Owners Manual for BWB-1S Belgian Wafe Baker

manufactured by Wells Manufacturing is warranted against

defects in materials and workmanship for a period of one year

from the date of original installation or 18 months from the

date of shipment from our factory, whichever comes rst, and

is for the benet of the original purchaser only.

THIS WARRANTY IS THE COMPLETE AND ONLY

WARRANTY, EXPRESSED OR IMPLIED IN LAW OR IN

FACT, INCLUDING BUT NOT LIMITED TO, WARRANTIES

OF MERCHANTABILITY OR FITNESS FOR ANY

PARTICULAR PURPOSE, AND/OR FOR DIRECT, INDIRECT

OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH

WELLS BLOOMFIELD PRODUCTS. This warranty is void

if it is determined that, upon inspection by an authorized

service agency, the equipment has been modied, misused,

misapplied, improperly installed, or damaged in transit or by

re, ood or act of God. It also does not apply if the serial

nameplate has been removed, or if service is performed

by unauthorized personnel. The prices charged by Wells

Manufacturing for its products are based upon the limitations

limited to the repair of defects without charge by a Wells

Manufacturing factory authorized service agency or one of

its sub-service agencies. This service will be provided on

customer’s premises for non-portable models. Portable

models (a device with a cord and plug) must be taken

or shipped to the closest authorized service agency,

transportation charges prepaid, for service. In addition to

restrictions contained in this warranty, specic limitations are

shown in the Service Policy and Procedure Guide. Wells

Manufacturing authorized service agencies are located in

principal cities. This warranty is valid in the United States

and Canada and void elsewhere. Please consult your

classied telephone directory, your foodservice equipment

dealer or contact:

Wells Manufacturing

10 Sunnen Dr., St. Louis MO 63143 USA

phone (314) 678-6314 or fax (314) 781-2714

for information and other details concerning warranty.

LIMITED WARRANTY STATEMENT

SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS

NOTE: For your protection, please note that equipment

in this shipment was carefully inspected and packaged

by skilled personnel before leaving the factory. Upon

acceptance of this shipment, the transportation company

assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1. VISIBLE LOSS OR DAMAGE: Be certain that any

visible loss or damage is noted on the freight bill or

express receipt, and that the note of loss or damage is

signed by the delivery person.

2. FILE CLAIM FOR DAMAGE IMMEDIATELY:

Regardless of the extent of the damage.

3. CONCEALED LOSS OR DAMAGE: if damage is

unnoticed until the merchandise is unpacked, notify the

transportation company or carrier immediately, and le

“CONCEALED DAMAGE” claim with them. This

should be done within fteen (15) days from the date

the delivery was made to you. Be sure to retain the

container for inspection.

Wells Manufacturing cannot assume liability for damage or

loss incurred in transit. We will, however, at your request,

supply you with the necessary documents to support your

claim.

SHIPPING DAMAGE CLAIM PROCEDURE

1. Resetting of safety thermostats, circuit breakers, over

load protectors, and/or fuse replacements are not

covered by this warranty unless warranted conditions

are the cause.

2. All problems due to operation at voltages or phase

other than specied on equipment nameplates are not

covered by this warranty.

Conversion to correct voltage and/or phase must be

the customer’s responsibility.

3. All problems due to electrical connections not made

in accordance with electrical code requirements

and wiring diagrams supplied with the equipment are

not covered by this warranty.

4. Replacement of items subject to normal wear, to

include such items as knobs, light bulbs; and, normal

maintenance functions including adjustments of

thermostats, adjustment of micro switches and

replacement of fuses and indicating lights are not

covered by warranty.

5. Damage to electrical cords and/or plug due to exposure

to excessive heat are not covered by this warranty.

6. Full use, care, and maintenance instructions supplied

with each machine. Noted maintenance and

preventative maintenance items, such as servicing

and cleaning schedules, are customer responsibility.

Those miscellaneous adjustments noted are customer

responsibility. Proper attention to preventative

maintenance and scheduled maintenance procedures

will prolong the life of the appliance.

7. Travel mileage is limited to sixty (60) miles from an

Authorized Service Agency or one of its sub-service

agencies.

8. All labor shall be performed during regular working

hours. Overtime premium will be charged to the buyer.

9. All genuine Wells replacement parts are warranted

for ninety (90) days from date of purchase on non-

warranty equipment. This parts warranty is limited only

to replacement of the defective part(s). Any use of non-

genuine Wells parts completely voids any warranty.

10. Installation, labor, and job check-outs are not

considered warranty and are thus not covered by this

warranty.

11. Charges incurred by delays, waiting time or operating

restrictions that hinder the service technician’s ability

to perform service are not covered by warranty. This

includes institutional and correctional facilities.

M211 2M-307154 Owners Manual for BWB-1S Belgian Wafe Baker

WARRANTY xi

SPECIFICATIONS 1

FEATURES & OPERATING CONTROLS 2

PRECAUTIONS & GENERAL INFORMATION 3

AGENCY LISTING INFORMATION 3

INSTALLATION 4

OPERATION 5

OPERATION - ELECTRONIC UNITS 6

CLEANING INSTRUCTIONS 7

TIMER ADJUSTMENT 9

TROUBLESHOOTING SUGGESTIONS 9

EXPLODED VIEW & PARTS LIST 10 - 15

WIRING DIAGRAM 16

PARTS & SERVICE 17

CUSTOMER SERVICE DATA 17

Thank You for purchasing this Wells Manufacturing appliance.

Proper installation, professional operation and consistent maintenance of this appliance will ensure that it

gives you the very best performance and a long, economical service life.

This manual contains the information needed to properly install this appliance, and to use and care for the

appliance in a manner which will ensure its optimum performance.

TABLE OF CONTENTS

SPECIFICATIONS

INTRODUCTION

MODEL STYLE VOLTAGE 1ø WATTS AMPS POWER SUPPLY CORD

BWB1S Single Belgian

Wafe Baker

120 VAC 900W 7.5 A NEMA 5-15P

BWB1SE-KOR 220/240V 792/912 3.6/3.8 CEE7/VII

Especificaciones del producto

Marca:	Wells
Categoría:	máquina para hacer gofres
Modelo:	BWB1SE
Color del producto:	Wit
Ancho:	113 mm
Profundidad:	89 mm
Altura:	28 mm
Indicadores LED:	Ja
Frecuencia del procesador:	650 MHz
Modelo de procesador:	Qualcomm Atheros QCA9531
Incluye adaptador de CA:	Ja
Número de puertos Ethernet LAN (RJ-45):	4
Consumo de energía (máx.):	3 W
Conexión para adaptador de red:	Ja
Memoria interna:	32 MB
Tipo de procesador:	Ja
LAN Ethernet, velocidades de transferencia de datos:	10, 100 Mbit/s
Nivel de ganancia de antena (máx.):	1.5 dBi
Interno:	Ja
Botón de reinicio:	Ja
2,4GHz:	Ja
Funciones de antena:	Ingebouwde antenne
voltaje-de-entrada-de-CA:	5 V
Código del Sistema Armonizado (SA):	85176990
Estándar inalámbrico:	802.11b/g/n