Wells H2412G Manual de Usario

Wells horno H2412G

Lee a continuación 📖 el manual en español para Wells H2412G (34 páginas) en la categoría horno. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/34
WELLS MANUFACTURING
10 Sunnen Dr., St. Louis, MO 63143
telephone: 314-678-6314
www.wellsbloomfield.com
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
OPERATION
MANUAL
for
COUNTER TOP
GAS HOTPLATE
Model
H-2412G
INSTANT-ON
Includes
INSTALLATION
USE & CARE
228
p/n 2M-306916 Rev. E M228 120210
Model H-2412G
Instant-On
FOR YOUR SAFETY
Do not store gasoline or other ammable liquids in the vicinity of this or any
other appliance.
WARNING:
Improper installation, adjustment, alteration, service or maintenance can cause
property damage, injury or death. Read the installation, operating and maintenance
instructions thoroughly before installing or servicing this equipment.
IMPORTANT:
The purchaser of this equipment must post in a prominent location instructions to be followed in the
event the user smells gas. This information shall be obtained by consulting the local gas supplier.
M228 2M-306916 OpM H-2412 Instant-On Dual Pilot Gas Hotplate
equipment manufactured by WELLS BLOOMFIELD, LLC is
warranted against defects in materials and workmanship
for a period of one year from the date of original installation
or 18 months from the date of shipment from our factory,
whichever comes rst, and is for the benet of the original
purchaser only.
THIS WARRANTY IS THE COMPLETE AND ONLY
WARRANTY, EXPRESSED OR IMPLIED IN LAW
OR IN FACT, INCLUDING BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR ANY PARTICULAR PURPOSE, AND/OR FOR
DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES IN
CONNECTION WITH WELLS BLOOMFIELD PRODUCTS.
This warranty is void if it is determined that, upon inspection
by an authorized service agency, the equipment has been
modied, misused, misapplied, improperly installed, or
damaged in transit or by re, ood or act of God. It also
does not apply if the serial nameplate has been removed,
or if service is performed by unauthorized personnel.
are based upon the limitations in this warranty. Seller’s
obligation under this warranty is limited to the repair of
defects without charge by a Wells Bloomeld factory
authorized service agency or one of its sub-service
agencies. This service will be provided on customer’s
premises for non-portable models. Portable models (a
device with a cord and plug) must be taken or shipped
to the closest authorized service agency, transportation
charges prepaid, for service. In addition to restrictions
contained in this warranty, specic limitations are shown in
the Service Policy and Procedure Guide. Wells Bloomeld
authorized service agencies are located in principal cities.
This warranty is valid in the United States and Canada and
void elsewhere. Please consult your classied telephone
directory, your foodservice equipment dealer or contact:
Wells Bloomeld, LLC
10 Sunnen Dr., St. Louis MO 63143 USA
phone (314) 678-6314 or fax (314) 781-2714
for information and other details concerning warranty.
LIMITED WARRANTY STATEMENT
SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS
NOTE: For your protection, please note that equipment
in this shipment was carefully inspected and packaged
by skilled personnel before leaving the factory. Upon
acceptance of this shipment, the transportation company
assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1. Be certain that any VISIBLE LOSS OR DAMAGE:
visible loss or damage is noted on the freight bill or
express receipt, and that the note of loss or damage is
signed by the delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.
3. if damage isCONCEALED LOSS OR DAMAGE:
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and le
“CONCEALED DAMAGE” claim with them. This
should be done within fteen (15) days from the date
the delivery was made to you. Be sure to retain the
container for inspection.
Wells Bloomeld cannot assume liability for damage or loss
incurred in transit. We will, however, at your request, supply
you with the necessary documents to support your claim.
SHIPPING DAMAGE CLAIM PROCEDURE
xi
1. Resetting of safety thermostats, circuit breakers, over
load protectors, and/or fuse replacements are not
covered by this warranty unless warranted conditions
are the cause.
2. All problems due to operation at voltages or phase
other than specied on equipment nameplates are
not covered by this warranty.
Conversion to correct voltage and/or phase must be
the customers responsibility.
3. All problems due to electrical connections not made
in accordance with electrical code requirements
and wiring diagrams supplied with the equipment are
not covered by this warranty.
4. Replacement of items subject to normal wear, to
include such items as knobs, light bulbs; and, normal
maintenance functions including adjustments of
thermostats, adjustment of micro switches and
replacement of fuses and indicating lights are not
covered by warranty.
5. Damage to electrical cords and/or plug due to exposure
to excessive heat are covered by this warranty.not
6. Full use, care, and maintenance instructions supplied
with each machine. Noted maintenance and
preventative maintenance items, such as servicing and
cleaning schedules, are customer responsibility.
Those miscellaneous adjustments noted are customer
responsibility. Proper attention to preventative
maintenance and scheduled maintenance procedures
will prolong the life of the appliance.
7. Travel mileage is limited to from an sixty (60) miles
Authorized Service Agency or one of its sub-service
agencies.
8. All labor shall be performed during regular working
hours. Overtime premium will be charged to the buyer.
9. All genuine Wells replacement parts are warranted
for ninety (90) days from date of purchase on non-
warranty equipment. This parts warranty is limited only
to replacement of the defective part(s). use of Any
non-genuine Wells parts completely voids any
warranty.
10. Installation, labor, and job check-outs are not
considered warranty and are thus covered by this not
warranty.
11. Charges incurred by delays, waiting time or operating
restrictions that hinder the service technician’s ability to
perform service are covered by warranty. This not
includes institutional and correctional facilities.
M228 2M-306916 OpM H-2412 Instant-On Dual Pilot Gas Hotplate
WARRANTY xi
SPECIFICATIONS 1
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 3
AGENCY APPROVAL INFORMATION 3
INSTALLATION 4
INITIAL ADJUSTMENT 7
OPERATION 8
TROUBLESHOOTING 10
CLEANING INSTRUCTIONS 11
ASSEMBLY DIAGRAM 12
PARTS & SERVICE 13
CUSTOMER SERVICE DATA 13
Thank You for purchasing this
Wells Bloomeld appliance.
Proper installation, professional
operation and consistent
maintenance of this equipment
will ensure that it gives you the
very best performance and a long,
economical service life.
This manual contains the
information needed to properly
install this equipment, and to use
and care for the equipment in a
manner which will ensure its
optimum performance.
TABLE OF CONTENTS
SPECIFICATIONS
1
MODEL COOKING
SURFACE STYLE FUEL MANIFOLD
PRESSURE
B.T.U /HR/
BURNER
TOTAL
B.T.U./HR
H-2412G
Instant-On
Dual Pilot
11-7/32” Wide,
22-27/32” Deep
2 BURNERS
WITH INDIVIDUAL
CONTROL
Natural
Gas 5.0” W.C. 12,000 24,000
Propane 10.0” W.C. 12,000 24,000

Especificaciones del producto

Marca: Wells
Categoría: horno
Modelo: H2412G
Color del producto: Black, White
Peso.: 970 g
Número de lámparas: - gloeilamp(en)
Tipo de lámpara: LED
Interruptor encendido / apagado: Ja
Diámetro: 43 mm
Incluye adaptador de CA: Ja
Número: 1
Vida útil de la lámpara: - uur
Corriente de salida: 4 A
Abarcando: 15 V
Los activos totales: 35 W
Regulable: Ja
Índice de reproducción cromática (CRI): 97
Temperatura de color ajustable: Ja
Temperatura de color (máx.): 12000 K
voltaje-de-entrada-de-CA: 100 - 240 V
Frecuencia-de-entrada-de-CA: 50 / 60 Hz
Temperatura de color (mín.): 2700 K
Consumo de energía por 1000 horas.: - kWu

¿Necesitas ayuda?

Si necesitas ayuda con Wells H2412G haz una pregunta a continuación y otros usuarios te responderán




horno Wells Manuales

horno Manuales

Últimos horno Manuales