Wells MOD100T Manual de Usario

Wells plato calentador MOD100T

Lee a continuación 📖 el manual en español para Wells MOD100T (24 páginas) en la categoría plato calentador. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/24

WELLS MANUFACTURING

10 Sunnen Dr., St. Louis, MO 63143

telephone: 314-678-6314

fax: 314-781-2714

www.wellsbloomfield.com

IMPORTANT: DO NOT DISCARD THIS MANUAL

This manual is considered to be part of the appliance and is to be given to the OWNER or

MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of

this appliance. Additional manuals are available from your WELLS DEALER.

THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR

INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any

questions concerning installation, operation or maintenance of this equipment.

OWNERS MANUAL

BUILT-IN

SINGLE WELL

MODULAR

WARMERS

with

THERMOSTAT & DIGITAL

ELECTRONIC CONTROL

MODELS

MOD100T, TD, TDWA

MOD100E, ED, HE

MOD100HT, HTD

MOD127TD, TDWA

Includes

INSTALLATION

USE & CARE

EXPLODED VIEW

PARTS LIST

WIRING DIAGRAM

011C

2M-308017 Rev. (B) M011C.01 120312

MOD100T

equipment manufactured by Wells Manufacturing is

warranted against defects in materials and workmanship

for a period of one year from the date of original installation

or 18 months from the date of shipment from our factory,

whichever comes rst, and is for the benet of the original

purchaser only.

THIS WARRANTY IS THE COMPLETE AND ONLY

WARRANTY, EXPRESSED OR IMPLIED IN LAW

OR IN FACT, INCLUDING BUT NOT LIMITED TO,

WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR ANY PARTICULAR PURPOSE, AND/OR FOR

DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES IN

CONNECTION WITH WELLS MANUFACTURING. This

warranty is void if it is determined that, upon inspection

by an authorized service agency, the equipment has

been modied, misused, misapplied, improperly installed,

or damaged in transit or by re, ood or act of God. It

also does not apply if the serial nameplate has been

removed, or if service is performed by unauthorized

for its products are based upon the limitations in this

warranty. Seller’s obligation under this warranty is

limited to the repair of defects without charge by a Wells

Manufacturing factory authorized service agency or one of

its sub-service agencies. This service will be provided on

customer’s premises for non-portable models. Portable

models (a device with a cord and plug) must be taken

or shipped to the closest authorized service agency,

transportation charges prepaid, for service. In addition to

restrictionscontained in this warranty, specic limitations are

shown in the Service Policy and Procedure Guide. Wells

Manufacturing authorized service agencies are located in

principal cities. This warranty is valid in the United States

and Canada and void elsewhere. Please consult your

classied telephone directory, your foodservice equipment

dealer or contact:

Wells Manufacturing

10 Sunnen Dr., St. Louis MO 63143 USA

phone (314) 781-2777 or fax (314) 781-2714

for information and other details concerning warranty.

LIMITED WARRANTY STATEMENT

SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS

NOTE: For your protection, please note that equipment

in this shipment was carefully inspected and packaged

by skilled personnel before leaving the factory. Upon

acceptance of this shipment, the transportation company

assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1. Be certain that any VISIBLE LOSS OR DAMAGE:

visible loss or damage is noted on the freight bill or

express receipt, and that the note of loss or damage is

signed by the delivery person.

2. FILE CLAIM FOR DAMAGE IMMEDIATELY:

Regardless of the extent of the damage.

3. if damage isCONCEALED LOSS OR DAMAGE:

unnoticed until the merchandise is unpacked, notify the

transportation company or carrier immediately, and le

“CONCEALED DAMAGE” claim with them. This

should be done within fteen (15) days from the date

the delivery was made to you. Be sure to retain the

container for inspection.

Wells Manufacturing cannot assume liability for damage or

loss incurred in transit. We will, however, at your request,

supply you with the necessary documents to support your

claim.

SHIPPING DAMAGE CLAIM PROCEDURE

1. Resetting of safety thermostats, circuit breakers, over

load protectors, and/or fuse replacements are not

covered by this warranty unless warranted conditions

are the cause.

2. All problems due to operation at voltages or phase

other than specied on equipment nameplates are

not covered by this warranty.

Conversion to correct voltage and/or phase must be

the customer’s responsibility.

3. All problems due to electrical connections not made

in accordance with electrical code requirements

and wiring diagrams supplied with the equipment are

not covered by this warranty.

4. Replacement of items subject to normal wear, to

include such items as knobs, light bulbs; and, normal

maintenance functions including adjustments of

thermostats, adjustment of micro switches and

replacement of fuses and indicating lights are not

covered by warranty.

5. Damage to electrical cords and/or plug due to exposure

to excessive heat are covered by this warranty.not

6. Full use, care, and maintenance instructions supplied

with each machine. Noted maintenance and

preventative maintenance items, such as servicing and

cleaning schedules, are customer responsibility. Those

miscellaneous adjustments noted are customer

responsibility. Proper attention to preventative

maintenance and scheduled maintenance procedures

will prolong the life of the appliance.

7. Travel mileage is limited to sixty (60) miles from an

Authorized Service Agency or one of its sub-service

agencies.

8. All labor shall be performed during regular working

hours. Overtime premium will be charged to the buyer.

9. All genuine Wells replacement parts are warranted

for ninety (90) days from date of purchase on non-

warranty equipment. This parts warranty is limited only

to replacement of the defective part(s). use of Any

non-genuine voids any Wells parts completely

warranty.

10. Installation, labor, and job check-outs are not

considered warranty and are thus covered by this not

warranty.

11. Charges incurred by delays, waiting time or operating

restrictions that hinder the service technician’s ability to

perform service are covered by warranty. This not

includes institutional and correctional facilities.

2M-308017-011C Built-In Single Well Modular Warmer w/T-Stat Control

WARRANTY xi

FEATURES & OPERATING CONTROLS 2

PRECAUTIONS & GENERAL INFORMATION 3

AGENCY LISTING INFORMATION 3

INSTALLATION 4

OPERATION 6

MAINTENANCE INSTRUCTIONS 7

CLEANING INSTRUCTIONS 8

TROUBLESHOOTING SUGGESTIONS 10

EXPLODED VIEW & PARTS LIST 12-16

WIRING DIAGRAM 17

PARTS & SERVICE 20

CUSTOMER SERVICE DATA 21

Thank You for purchasing this Wells Manufacturing appliance.

Proper installation, professional operation and consistent maintenance of this appliance will ensure that it

gives you the very best performance and a long, economical service life.

This manual contains the information needed to properly install this appliance, and to use and care for the

appliance in a manner which will ensure its optimum performance.

TABLE OF CONTENTS

INTRODUCTION

SPECIFICATIONS

MODEL VOLTS AMPS WATTS POWER SUPPLY

CORD

MOD100T,

MOD100TD

120 VAC 1ø 13.8A 1600W

NOT SUPPLIED208 VAC 1ø 6.0A 1240W

240 VAC 1ø 6.9A 1600W

MOD127TD

208 VAC 1ø 6.0A 1240W

NOT SUPPLIED

240 VAC 1ø 6.9A 1600W

Especificaciones del producto

Marca:	Wells
Categoría:	plato calentador
Modelo:	MOD100T
Ancho:	244 mm
Profundidad:	244 mm
Bluetooth:	Ja
Estándares wifi:	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Versión Bluetooth:	4.2
Tipo de conector USB:	USB Type-A
red LAN:	Ja
Tipo de fuente de energía:	ATX
Número de puertos USB 2.0:	4
Número de puertos HDMI:	1
Micrófono, entrada de línea:	Ja
Número de puertos Ethernet LAN (RJ-45):	1
Salidas de auriculares:	1
Puertos DVI-D:	1
Software incluido:	Realtek 8118 Gaming LAN Bandwidth Control Utility\nNorton Internet Security
Estándar Wi-Fi:	Wi-Fi 5 (802.11ac)
Soporta Windows:	Windows 10
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	4
Zócalo del procesador:	Socket AM4
Fabricante del procesador:	AMD
Memoria interna máxima:	128 GB
Sistemas operativos compatibles:	Windows 10 64-bit
Canales de salida de audio:	7.1 kanalen
ETC:	Ja
Modelo de controlador WLAN:	Intel Dual Band Wireless-AC 3168
Tipo de interfaz Ethernet:	Gigabit Ethernet
placa base con chipset:	AMD B550
Tipo de ranura de memoria:	DIMM
Ranuras PCI Express x1:	1
Ranuras PCI Express x16:	1
Tipo de enfriamiento:	Passief
Soporte RAID:	Ja
Canal de memoria:	Dubbelkanaals
Interfaces de unidad de almacenamiento compatibles:	M.2, NVMe, SATA III
Ranuras PCI Express x4:	1
Componente para:	PC
Tipos de incursión:	0, 1,10
Número de conectores SATA III:	4
No ECC:	Ja
Procesadores compatibles:	AMD Ryzen 3 3rd Gen, AMD Ryzen 5 3rd Gen, AMD Ryzen 5 5th Gen, AMD Ryzen 7 3rd Gen, AMD Ryzen 7 5th Gen, AMD Ryzen 9 3rd Gen, AMD Ryzen 9 5th Gen
Tipos de memoria soportados:	DDR4-SDRAM
Wifi.:	Ja
Tipos de unidades de almacenamiento compatibles:	HDD & SSD
Familia de chipsets de placa base:	AMD
Factor de forma de la placa base:	micro ATX
Número de ranuras de memoria:	4
Velocidades de reloj de memoria admitidas:	2133,2400,2667,2933,3200,3333,3600,4000,4400,4600,4733 MHz
tipo de BIOS:	UEFI AMI
Tamaño de la memoria del BIOS:	256 Mbit
Versión ACPI:	5.0
Versión del BIOS de administración del sistema (SMBIOS):	2.7
Conexión para refrigerador de CPU:	Ja
Conector de alimentación ATX (24 pines):	Ja
Conector del panel frontal:	Ja
Conexión del ventilador de la fuente de alimentación:	Ja
Conexiones USB 2.0:	1
Conexión para panel de audio en el frente:	Ja
monitor de salud de la computadora:	CPU, FAN, Temperature, Voltage
Memoria sin búfer:	Ja
Conexiones USB 3.2 Gen 1 (3.1 Gen 1):	1
Número de conexiones ATA paralelas:	1
Conector de alimentación EPS (8 pines):	Ja
Capacidades de módulos de memoria admitidas:	4GB, 8GB, 16GB, 32GB
Zócalos de procesador compatibles:	Socket AM4
Conector de audio:	Ja
Versión Interfaz de administración de escritorio (DMI):	2.7
Conector paralelo:	Ja