Wells SS10T Manual de Usario
Wells
plato calentador
SS10T
Lee a continuación 📖 el manual en español para Wells SS10T (24 páginas) en la categoría plato calentador. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/24
WELLS MANUFACTURING
10 Sunnen Dr., St. Louis, MO 63143
telephone: 314-678-6314
fax: 314-781-2714
www.wellsbloomfield.com
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
OWNERS MANUAL
BUILT-IN ROUND WELL
WARMERS
(Insulated & Non-Insulated)
with
THERMOSTAT
CONTROL
MODELS
SS4ULT, ULTD
SS8T, TU TD, TD6
SS8ULT, ULTD
SS10T, TD
SS10ULT, ULTD
(Auto-Fill)
SS8TDUIAF, CIAF
SS10TDUIAF, CIAF
Includes
INSTALLATION
USE & CARE
EXPLODED VIEW
PARTS LIST
WIRING DIAGRAM
011D
p/n 2M-Z17558 Rev. (B) M011D.01 040815
SS10ULT
equipment manufactured by WELLS is warranted against
defects in materials and workmanship for a period of one
year from the date of original installation or 18 months from
the date of shipment from our factory, whichever comes rst,
and is for the benet of the original purchaser only.
THIS WARRANTY IS THE COMPLETE AND ONLY
WARRANTY, EXPRESSED OR IMPLIED IN LAW
OR IN FACT, INCLUDING BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR ANY PARTICULAR PURPOSE, AND/OR FOR
DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES
IN CONNECTION WITH WELLS PRODUCTS. This
warranty is void if it is determined that, upon inspection
by an authorized service agency, the equipment has been
modied, misused, misapplied, improperly installed, or
damaged in transit or by re, ood or act of God. It also
does not apply if the serial nameplate has been removed,
or if service is performed by unauthorized personnel. The
prices charged by Wells for its products are based upon the
warranty is limited to the repair of defects without charge
by a Wells factory authorized service agency or one of its
sub-service agencies. This service will be provided on
customer’s premises for non-portable models. Portable
models (a device with a cord and plug) must be taken
or shipped to the closest authorized service agency,
transportation charges prepaid, for service. In addition to
restrictions contained in this warranty, specic limitations are
shown in the Service Policy and Procedure Guide. Wells
Manufacturing authorized service agencies are located in
principal cities. This warranty is valid in the United States
and Canada and void elsewhere. Please consult your
classied telephone directory, your foodservice equipment
dealer or contact:
Wells Manufacturing
10 Sunnen Dr., St. Louis MO 63143 USA
phone (314) 678-6315 or fax (314) 781-2714
for information and other details concerning warranty.
LIMITED WARRANTY STATEMENT
SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS
NOTE: For your protection, please note that equipment
in this shipment was carefully inspected and packaged
by skilled personnel before leaving the factory. Upon
acceptance of this shipment, the transportation company
assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1. Be certain that any VISIBLE LOSS OR DAMAGE:
visible loss or damage is noted on the freight bill or
express receipt, and that the note of loss or damage is
signed by the delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.
3. if damage is CONCEALED LOSS OR DAMAGE:
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and le
“CONCEALED DAMAGE” claim with them. This
should be done within fteen (15) days from the date
the delivery was made to you. Be sure to retain the
container for inspection.
Wells cannot assume liability for damage or loss incurred in
transit. We will, however, at your request, supply you with
the necessary documents to support your claim.
SHIPPING DAMAGE CLAIM PROCEDURE
xi
1. Resetting of safety thermostats, circuit breakers, over
load protectors, and/or fuse replacements are not
covered by this warranty unless warranted conditions
are the cause.
2. All problems due to operation at voltages or phase
other than specied on equipment nameplates are
not covered by this warranty.
Conversion to correct voltage and/or phase must be
the customer’s responsibility.
3. All problems due to electrical connections not made
in accordance with electrical code requirements
and wiring diagrams supplied with the equipment are
not covered by this warranty.
4. Replacement of items , tosubject to normal wear
include such items as knobs, light bulbs; and, normal
maintenance functions including adjustments of
thermostats, adjustment of micro switches and
replacement of fuses and indicating lights are not
covered by warranty.
5. Damage to electrical cords and/or plug due to exposure
to excessive heat are covered by this warranty.not
6. Full use, care, and maintenance instructions supplied
with each machine. Noted maintenance and
preventative maintenance items, such as servicing and
cleaning schedules, are customer responsibility. Those
miscellaneous adjustments noted are customer
responsibility. Proper attention to preventative
maintenance and scheduled maintenance procedures
will prolong the life of the appliance.
7. Travel mileage is limited to from an fty (50) miles
Authorized Service Agency or one of its sub-service
agencies.
8. All labor shall be performed during regular working
hours. Overtime premium will be charged to the buyer.
9. All genuine Wells replacement parts are warranted
for ninety (90) days from date of purchase on non-
warranty equipment. This parts warranty is limited only
to replacement of the defective part(s). use of Any
non-genuine Wells parts completely voids any
warranty.
10. Installation, labor, and job check-outs are not
considered warranty and are thus covered by this not
warranty.
11. Charges incurred by delays, waiting time or operating
restrictions that hinder the service technician’s ability to
perform service are covered by warranty. This not
includes institutional and correctional facilities.
M011D.01 2M-Z17558 Owners Manual for Built-In Round T’Stat Warmers
M011D.01 2M-Z17558 Owners Manual for Built-In Round T’Stat Warmers
3
WARRANTY xi
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 3
AGENCY LISTING INFORMATION 3
INSTALLATION 4
OPERATION 7-8
MAINTENANCE INSTRUCTIONS 9
CLEANING INSTRUCTIONS 10-11
TROUBLESHOOTING SUGGESTIONS 12
WIRING DIAGRAM 12-13
EXPLODED VIEW & PARTS LIST
Non Auto-Fill Units 14
Auto-Fill Units 19
ACCESSORIES LIST 23
CUSTOMER SERVICE DATA 23
Thank You for purchasing this Wells appliance.
Proper installation, professional operation and consistent maintenance of this appliance will ensure that it
gives you the very best performance and a long, economical service life.
This manual contains the information needed to properly install this appliance, and to use and care for the
appliance in a manner which will ensure its optimum performance.
TABLE OF CONTENTS
INTRODUCTION
SPECIFICATIONS
MODEL VOLTS AMPS WATTS POWER SUPPLY CORD
SS4T, TD, ULT, ULTD 120 VAC 1ø 6.9A 825W
NOT SUPPLIEDSS8T, TD, ULT, ULTD 208 VAC 1ø 3.0A 620W
SS10T, TD, ULT, ULTD 240 VAC 1ø 3.4A 825W
Especificaciones del producto
| Marca: | Wells |
| Categoría: | plato calentador |
| Modelo: | SS10T |
¿Necesitas ayuda?
Si necesitas ayuda con Wells SS10T haz una pregunta a continuación y otros usuarios te responderán
plato calentador Wells Manuales
25 Agosto 2024
19 Agosto 2024
19 Agosto 2024
17 Agosto 2024
plato calentador Manuales
- plato calentador Topcom
- plato calentador Ariete
- plato calentador Bartscher
- plato calentador Salton
- plato calentador Tristar
- plato calentador Waring Commercial
- plato calentador Hendi
- plato calentador Steba
- plato calentador Beem
- plato calentador Rommelsbacher
- plato calentador Crock-Pot
- plato calentador Bifinett
- plato calentador Proctor Silex
- plato calentador Saro
- plato calentador CaterChef
- plato calentador Chefman
- plato calentador Max Pro
- plato calentador Avantco
- plato calentador Hatco
- plato calentador Merco
- plato calentador Casselin
- plato calentador Royal Catering
- plato calentador Brentwood
Últimos plato calentador Manuales
14 Octubre 2024
5 Octubre 2024
24 Septiembre 2024
24 Septiembre 2024
21 Septiembre 2024
19 Septiembre 2024
18 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024