Wells RWN2 Manual de Usario

Wells Cajón calentador RWN2

Lee a continuación 📖 el manual en español para Wells RWN2 (20 páginas) en la categoría Cajón calentador. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/20

WELLS MANUFACTURING

10 Sunnen Dr., St. Louis, MO 63143

telephone: 314-678-6314

fax: 314-781-2714

www.wellsbloomfield.com

IMPORTANT: DO NOT DISCARD THIS MANUAL

This manual is considered to be part of the appliance and is to be given to the OWNER or

MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of

this appliance. Additional manuals are available from your WELLS DEALER.

THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR

INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any

questions concerning installation, operation or maintenance of this equipment.

OWNERS MANUAL

FREE STANDING

DRAWER WARMERS

with THERMOSTATIC

CONTROL

MODELS

RW1HD

RW2HD

RW3HD

RWN1

RWN2

RWN3

Includes

INSTALLATION

USE & CARE

EXPLODED VIEW

PARTS LIST

WIRING DIAGRAM

041

p/n Rev. F M041 01242M-303335 14

Model RW2HD

Model RWN2

M041 p/n 2M-303335 Owners Manual Free-Standing Drawer Warmer

equipment manufactured by WELLS MANUFACTURING is

warranted against defects in materials and workmanship for a

period of one year from the date of original installation or 18

months from the date of shipment from our factory, whichever

comes rst, and is for the benet of the original purchaser

only.

THIS WARRANTY IS THE COMPLETE AND ONLY

WARRANTY, EXPRESSED OR IMPLIED IN LAW OR IN

FACT, INCLUDING BUT NOT LIMITED TO, WARRANTIES

OF MERCHANTABILITY OR FITNESS FOR ANY

PARTICULAR PURPOSE, AND/OR FOR DIRECT, INDIRECT

OR CONSEQUENTIAL DAMAGES IN CONNECTION

WITH WELLS MANUFACTURING PRODUCTS. This

warranty is void if it is determined that, upon inspection by an

authorized service agency, the equipment has been modied,

misused, misapplied, improperly installed, or damaged in

transit or by re, ood or act of God. It also does not apply

if the serial nameplate has been removed, or if service is

performed by unauthorized personnel. The prices charged

limitations in this warranty. Seller’s obligation under this

warranty is limited to the repair of defects without charge by

a Wells Manufacturing factory authorized service agency

or one of its sub-service agencies. This service will be

provided on customer’s premises for non-portable models.

Portable models (a device with a cord and plug) must be

taken or shipped to the closest authorized service agency,

transportation charges prepaid, for service. In addition to

restrictions contained in this warranty, specic limitations are

shown in the Service Policy and Procedure Guide. Wells

Manufacturing authorized service agencies are located in

principal cities. This warranty is valid in the United States and

Canada and void elsewhere. Please consult your classied

telephone directory, your food-service equipment dealer or

contact:

Wells Manufacturing

10 Sunnen Dr., St. Louis MO 63143 USA

phone (314) 678-6314 or fax (314) 781-2714

for information and other details concerning warranty.

LIMITED WARRANTY STATEMENT

SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS

NOTE: For your protection, please note that equipment

in this shipment was carefully inspected and packaged

by skilled personnel before leaving the factory. Upon

acceptance of this shipment, the transportation company

assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1. VISIBLE LOSS OR DAMAGE: Be certain that any

visible loss or damage is noted on the freight bill or

express receipt, and that the note of loss or damage is

signed by the delivery person.

2. FILE CLAIM FOR DAMAGE IMMEDIATELY:

Regardless of the extent of the damage.

3. CONCEALED LOSS OR DAMAGE: if damage is

unnoticed until the merchandise is unpacked, notify the

transportation company or carrier immediately, and le

“CONCEALED DAMAGE” claim with them. This

should be done within fteen (15) days from the date

the delivery was made to you. Be sure to retain the

container for inspection.

Wells Manufacturing cannot assume liability for damage or

loss incurred in transit. We will, however, at your request,

supply you with the necessary documents to support your

claim.

SHIPPING DAMAGE CLAIM PROCEDURE

1. Resetting of safety thermostats, circuit breakers, over

load protectors, and/or fuse replacements are not

covered by this warranty unless warranted conditions

are the cause.

2. All problems due to operation at voltages or phase other

than specied on equipment nameplates are not covered

by this warranty.

Conversion to correct voltage and/or phase must be

the customer’s responsibility.

3. All problems due to electrical connections not made

in accordance with electrical code requirements and

wiring diagrams supplied with the equipment are not

covered by this warranty.

4. Replacement of items subject to normal wear, to

include such items as knobs, light bulbs; and,

normal maintenance functions including adjustments

of thermostats, adjustment of micro switches and

replacement of fuses and indicating lights are not

covered by warranty.

5. Damage to electrical cords and/or plug due to exposure

to excessive heat are not covered by this warranty.

6. Full use, care, and maintenance instructions supplied

with each machine. Noted maintenance and

preventative maintenance items, such as servicing

and cleaning schedules, are customer responsibility.

Those miscellaneous adjustments noted are customer

responsibility. Proper attention to preventative

maintenance and scheduled maintenance procedures

will prolong the life of the appliance.

7. Travel mileage is limited to sixty (60) miles from an

Authorized Service Agency or one of its sub-service

agencies.

8. All labor shall be performed during regular working

hours. Overtime premium will be charged to the buyer.

9. All genuine Wells replacement parts are warranted for

ninety (90) days from date of purchase on non-warranty

equipment. This parts warranty is limited only to

replacement of the defective part(s). Any use of non-

genuine Wells parts completely voids any warranty.

10. Installation, labor, and job check-outs are not considered

warranty and are thus not covered by this warranty.

11. Charges incurred by delays, waiting time or operating

restrictions that hinder the service technician’s ability

to perform service are not covered by warranty. This

includes institutional and correctional facilities.

M041 p/n 2M-303335 Owners Manual Free-Standing Drawer Warmer

WARRANTY xi

SPECIFICATIONS 1

FEATURES & OPERATING CONTROLS 2

PRECAUTIONS & GENERAL INFORMATION 3

AGENCY LISTING INFORMATION 3

INSTALLATION 4

OPERATION 6

CLEANING INSTRUCTIONS 8

TROUBLESHOOTING SUGGESTIONS 9

MAINTENANCE INSTRUCTIONS 10

EXPLODED VIEW & PARTS LIST 11

WIRING DIAGRAM 13

PARTS & SERVICE 17

CUSTOMER SERVICE DATA 17

Thank You for purchasing this Wells Manufacturing appliance.

Proper installation, professional operation and consistent maintenance of this appliance will ensure that it

gives you the very best performance and a long, economical service life.

This manual contains the information needed to properly install this appliance, and to use and care for the

appliance in a manner which will ensure its optimum performance.

TABLE OF CONTENTS

INTRODUCTION

SPECIFICATIONS

MODELS VOLTS

50/60 Hz 1ø WATTS AMPS POWER

CORD

RW1HD, RWN1 120 VAC 3.8450 W NEMA-5-15P

208/240 VAC 1.6/1.9338/450 W NEMA 6-15P

RW2HD, RWN2 120 VAC 900 W 7.5 NEMA-5-15P

208/240 VAC 676/900 W 3.3/3.8 NEMA 6-15P

RW3HD, RWN3 120 VAC 11.31350 W NEMA-5-15P

208/240 VAC 1014/1350 W 4.9/5.6 NEMA 6-15P

Especificaciones del producto

Marca:	Wells
Categoría:	Cajón calentador
Modelo:	RWN2
Color del producto:	Black, Grey
Pantalla incorporada:	Nee
Peso.:	21660 g
Ancho:	448 mm
Profundidad:	500 mm
Altura:	130 mm
Ancho del embalaje:	779 mm
Empaquetadura en profundidad:	580 mm
Altura del embalaje:	450 mm
Amable:	Opslagserver
Indicadores LED:	Ja
Puerto USB:	Nee
red LAN:	Ja
Lector de tarjetas de memoria integrado:	Nee
Número de puertos Ethernet LAN (RJ-45):	8
Certificación:	UL, BSMI, CB, EAC\nCE, BSMI, FCC, KC
Memoria interna:	4 GB
Tipo de memoria interna:	DDR3
LAN Ethernet, velocidades de transferencia de datos:	10,100,1000 Mbit/s
Algoritmos de seguridad compatibles:	SSH
Soporta Windows:	Ja
Temperatura de almacenamiento:	-40 - 60 °C
numero de fans:	2 ventilator(en)
Gestión basada en web:	Ja
Soporta el sistema operativo Mac:	Ja
Humedad de almacenamiento:	5 - 95 procent
Compatibilidad con Mac:	Ja
Tipo de vivienda:	Rack (3U)
Número de tomas:	2
Capacidad de la unidad de fuente de alimentación (PSU):	460 W
Certificación 80 PLUS:	80 PLUS
Fuente de alimentación redundante:	Ja
Capacidad de la unidad de almacenamiento:	- GB
Capacidad total de almacenamiento instalada:	- TB
Compatible con Linux:	Ja
Altura operativa:	0 - 3660 m
Altura en almacenamiento:	0 - 12192 m
Sistemas operativos de servidor compatibles:	Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2
Tipo de enfriamiento:	Actief
Interfaz de disco de almacenamiento:	Serial ATA, Serial Attached SCSI (SAS)
Soporte RAID:	Ja
Tamaño del disco de almacenamiento:	2.5/3.5 "
Clase de dispositivo:	Kleine & middelgrote bedrijven
Puertos seriales):	1
Protocolos de gestión:	SNMP, Telnet
Tipos de incursión:	0, 0+1, 1,3, 5,6, 10, 30, 50, 60, JBOD
Número de unidades de almacenamiento admitidas:	16
Wifi.:	Nee
voltaje-de-entrada-de-CA:	100-240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Temperatura de funcionamiento (TT):	0 - 40 °C
Humedad relativa de funcionamiento (VV):	5 - 95 procent
Unidad óptica incorporada:	Nee
Bahías de unidades de intercambio en caliente:	Ja
Función de copia de seguridad:	Ja
Soporte INTELIGENTE:	Ja
Tipos de unidades de almacenamiento compatibles:	HDD & SSD
soporte iSCSI:	Ja
Ubicación de la fuente de alimentación:	Ingebouwd
RAM máxima admitida:	64 GB
Paquete de montaje en bastidor:	Ja