Westcott Zeppelin Manual de Usario

Westcott No categorizado Zeppelin

Lee a continuación 📖 el manual en español para Westcott Zeppelin (2 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

QUICK START GUIDE

Zeppelin™ Para-35

650-watt max

Zeppelin™ Para-47

1000-watt max

Zeppelin™ Para-59

1000-watt max

WARRANTY

One year against manufacturer defect.

Westcott’s warranty obligations for this product are limited to the terms set forth

below: The F.J. Westcott Co. (“Westcott”) warrants this Westcott branded product

against defects in materials and workmanship under normal use for a period of

ONE (1) YEAR from the date of retail purchase by the original end-user purchaser

(“Warranty Period”). If a defect arises and a valid claim is received within the

Warranty Period, at its option and to the extent permitted by law, Westcott will either

(1) repair the defect at no charge, using new or refurbished replacement parts, or (2)

exchange the product with a product that is new or which has been manufactured

from new or serviceable used parts and is at least functionally equivalent to the

original product. This Limited Warranty applies only to products manufactured by

or for Westcott that can be identiﬁed by the “Westcott” trademark, trade name, or

logo afﬁxed to them.

This warranty does not apply: (a) to damage caused by accident, abuse, misuse,

ﬂood, ﬁre, earthquake or other external causes; (b) to damage caused by operating

the product outside the permitted or intended uses described by Westcott; (c) to a

product or part that has been modiﬁed to alter functionality or capability without the

written permission of Westcott.; or (d) to cosmetic damage, including but not limited

to scratches, dents and broken plastic.

Please contact Westcott’s Repair Department for a Return Authorization Number

“RMA" prior to requesting warranty service. This RMA must be clearly written on

the outside of the box to the left of the shipping label. Items sent in without pre-

authorization or that do not fall under the ONE (1) YEAR limited warranty will be

returned at the expense of the sender.

Repair Dept.: 800-886-1689 / 419-243-7311 (International)

E-Mail: INFO@FJWESTCOTT.COM SUBJECT: ATTN: REPAIR DEPT.

Shipping: F.J. Westcott Co, 1425-B Holland Rd, Maumee, OH 43537

SETUP USAGE

CAUTION

• Never use lighting products in or around liquid.

• Zeppelin owners should comply with the Maximum Wattages

stated by Westcott.

• Important: When using the internal mounting method please

avoid touching the light head’s bulbs and/or ﬂash tubes to the

fabric as this could result in permanent damage to the bulbs

and/or the Zeppelin softbox.

• Important: Westcott recommends that ALL Zeppelin owners use

ONLY those Zeppelin Speedrings & Mounting brackets speciﬁed

and approved by Westcott. Failure to do so could result in

damaging the light head and/or the Zeppelin softbox. Please

visit the Zeppelin product pages at fjwestcott.com to ﬁnd a

complete listing of approved speedrings and mounting brackets.

• Each rod must be gently seated completely into the

corresponding speedring hole before moving to the next hole.

Do not force rods into place. Failing to do so could result in

the rods becoming permanently bent, damaging the softbox,

damaging the light head, or causing personal injury.

• Rods may become bent due to improper assembly. Slight

bending of the rods WILL NOT affect the performance of the

Zeppelin product.

REMOVING THE WESTCOTT ZEPPELIN™

FROM THE ZEPPELIN™ MOUNTING

BRACKET WITH BUILT-IN SPEEDRING

1. Remove the rear ventilation cover and both diffusion panels.

2. the If using Mounting Method #1, remove your light head from

Zeppelin Speedring Mounting Bracket.

3. second If using Mounting Method #2, remove the light head and

light stand through the zippered opening.

4. If using Mounting Method #3, remove the light head from the

Boom Arm within the softbox.

5. Bracket Loosen the silver tension knobs on the Zeppelin Speedring

and remove the Zeppelin from the light stand.

6. Place the front edge/face of the Zeppelin Softbox onto a ﬂat

surface.

7. while Grasp one rod with your dominant hand and pull slightly

pushing against the bracket. Repeat with each rod. Remove every

other rod from the speedring for easiest disassembly.

For setup video tutorials please visit: westcottu.com

ZEPPELIN DEEP PARABOLIC SOFTBOX ASSEMBLY

(Requires the Zeppelin Speedring Bracket - Part# 3740/3741

/3742/3743 - Sold Separately)

1. Layout the Zeppelin Softbox ﬂat on

the ﬂoor, with the zippered entry point

centered facing upward. Locate the

two centered rods. Both rods should be

aligned on either side of the zipper.

2. With the Zeppelin Speedring & Mounting

Bracket in hand, insert both rods into the corresponding

receptacles on the BOTTOM of the

mounting bracket.

3. Find the opposing rods, located on

the opposite side of the softbox, and

place these rods into the corresponding

receptacles on the TOP of the mounting

bracket.

4. All rods should now be arranged on the

outside of the mounting bracket for easier installation.

5. To install the remaining 12 rods, place rods in the similar pattern

by placing opposing rods into corresponding receptacles on the

mounting bracket.

6. When all rods are secured in the Zeppelin Speedring Bracket, the

assembly process is complete.

7. Ensure that the yoke of the Zeppelin

Speedring Bracket is parallel to the

ﬂoor and tighten to this position with the

adjustable silver handles located on the

bracket.

* Please note: the following steps will be

skipped when using the 3rd mounting

option (see mounting option #3 and instructions to right).

8. Grasp one rod of the Zeppelin Softbox with one hand and the

Zeppelin Speedring Bracket with the other. Lift the pair and mount

onto an assembled light stand.

9. Tighten the tension knob located on the bracket to ensure secure

placement.

10. Attach the rear heat-resistant collar using

to the hook-and-loop strip found along

the exterior edge of the softbox.

* Please note: the heat-resistant collar may

overlap the Zeppelin Speedring Bracket

when attached properly.

SETUP USAGE

OPTIONAL ACCESSORIES:

MOUNTING THE ZEPPELIN™ DEFLECTOR PLATE

The Zeppelin Deﬂector Plate should only be used when utilizing mounting

method #2 and # 3. The deﬂector plate will eliminate back spill of light,

maximizing your light output. To quickly install the Zeppelin Deﬂector Plate,

simply point the dome of the plate towards the rear of the Zeppelin, and

position the deﬂector plate’s clips to slide onto the silver portion of the

speedring. The deﬂector plate is

easily removable by removing the

Zeppelin’s back ventilation collar,

locating the back of the deﬂector

plate, and gently pressing forward

until the clips release from the

speedring.

MOUNTING A LIGHT HEAD TO THE WESTCOTT

ZEPPELIN PARA SOFTBOX

Please reference your light head manual to ensure correct attachment and

positioning on any speedring, bracket, stand, or arm.

Mounting Option #1: Rear Mount of the Light Head

1. Once assembly of the Zeppelin Deep

Parabolic softbox is complete, afﬁx your light

head to the speedring located on the rear of

the Zeppelin Speedring Bracket.

2. Conﬁrm that your light head is secure.

Failure to do so could result in the light head

becoming loose from the speedring and

being damaged.

* Please note that when using the 1st mounting

option, it is common to use the included ½-stop inner diffusion panel

to reduce any possible hotspots. This panel can be attached with the

elastic button tabs located on the interior of the softbox. The included

front diffusion panel may also be attached for further light diffusion.

The front diffusion panel can be attached to the Zeppelin Softbox via

the hook-and-loop strip located on the interior edge of the opening.

Mounting Option #2: Internal Light Head Mount Using

Secondary Light Stand

* Please note that, for proper utilization of this mounting method, you

must ensure that the zippered panel is facing the ﬂoor during assembly

(see Softbox Assembly steps 1 and 2 to left).

* Please note that, while not required, Westcott highly recommends the

purchase of the Zeppelin Deﬂector Plate (Westcott Part# 3730-DP,

sold separately) to minimize light spill when utilizing this mounting

method.

1. complete, Once assembly of the Zeppelin Deep Parabolic Softbox is

attach the Zeppelin Deﬂector Plate to the Zeppelin Speedring

Bracket to ensure maximum light output (see Mounting the Deﬂector

Plate to right).

2. Unzip the mounting panel located on the bottom exterior of the

softbox.

3. Insert an additional light stand

through the zippered opening

and mount your light head

onto this light stand.

4. Conﬁrm that your light head is

secure. Failure to do so could result in the light head becoming loose

from the speedring and being damaged.

* Please note when using the second mounting option, Westcott DOES

NOT recommend using the ½-stop inner diffusion panel. The front

diffusion panel, however, may be used to soften the light source. The

front diffusion panel can be attached to the Zeppelin Softbox via the

hook-and-loop strip located on the interior edge of the opening.

Mounting Option #3: Internal Light Head Mount Using Westcott Boom

Arm (Requires the Westcott Boom Arm - Part# 6017 - Sold Separately)

*Please note that, while not required, Westcott highly recommends

the purchase of the Zeppelin Deﬂector Plate (Westcott Part# 3730-DP,

sold separately) to minimize light spill when utilizing this mounting

method.

1. Complete assembly of the Zeppelin Deep Parabolic Softbox,

leaving the rear heat resistant collar unattached (complete step 2

prior to mounting on a stand).

2. Locate the Westcott Boom Arm and mount to an assembled light

stand ensuring that the Boom Arm is balanced properly.

3. Lift the Zeppelin Softbox and Speedring Bracket with both hands

and thread the spigot end of the Boom Arm carefully between two

exposed rods located near the rear of the softbox.

4. Attach the Zeppelin Softbox and Speedring Bracket to the light

stand. Tighten the tension knob located on the bracket to ensure

security.

5. Attach the Zeppelin Deﬂector Plate to the Zeppelin Speedring

Bracket to ensure maximum light output.

6. Attach the rear heat-resistant collar to the

Zeppelin Softbox to ensure maximize light

output.

7. Afﬁx your light head to the spigot on the

boom arm. When assembled correctly,

the boom are will be located inside of the

Zeppelin Softbox.

8. secure. Conﬁrm that your light head is

Failure to do so could result in the light

head becoming loose from the speedring

and being damaged.

* Please note that, depending on the design of your light head,

additional hardware (such as a tilter bracket or spigot) may be

required to successfully attach your light head to the boom arm.

Especificaciones del producto

Marca:	Westcott
Categoría:	No categorizado
Modelo:	Zeppelin

¿Necesitas ayuda?

Si necesitas ayuda con Westcott Zeppelin haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

No categorizado Westcott Manuales

Westcott Zeppelin Manual de Usario

11 Septiembre 2024

Westcott Apollo Manual de Usario

11 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024

Philips 43PUL7672 Manual de Usario

27 Octubre 2024

Manhattan 461504 Manual de Usario

27 Octubre 2024

Sungrow SG125HV Manual de Usario

27 Octubre 2024

Schneider CCT724319 Manual de Usario

27 Octubre 2024

Technoline WS 250 Manual de Usario

27 Octubre 2024

Livarno IAN 354423 Manual de Usario

27 Octubre 2024

Kupper 12152 Manual de Usario

27 Octubre 2024

JennAir CARBON24L Manual de Usario

27 Octubre 2024