Wet Sounds HTX-6 Manual de Usario

Lee a continuación 📖 el manual en español para Wet Sounds HTX-6 (19 páginas) en la categoría receptor. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/19
1 2 4 6
HIGH PERFORMANCE MARINE AUDIO
HTX SERIES
1
CONGRATULATIONS!
Thank you for purchasing the Wet Sounds Hydro-Tech
TM X (HTX) series amplier.
Wet Sounds represents the ultimate in High Performance Marine Audio. Wet
Sounds HTX Series Marine Ampliers are designed to be a complete solution for
every type of extreme marine application. HTX ampliers use superior performance
circuitry by utilizing Class D Power Supplies. These ampliers have extreme
power output packed inside a small chassis, thermal overload protection, exible
crossovers, extended inputs. HTX ampliers are a well balanced match for all of
the Wet Sounds™ products.
WARNING
We build all Wet Sounds products to play at high volumes for extended periods of
time. Your ears however are not designed for high volume listening. This product
can easily generate high volumes that can permanently damage your hearing.
We urge you to limit your exposure to very high volume sound. You may also nd
your state has laws governing the volume of an audio system. Please be aware
of all local and state laws in your area. A Properly tuned and operated audio
system will deliver years of enjoyment when used properly.
WARNING
Please check the installation location before you begin. Do not cut any of the boats
structure. Pay close attention to what items are behind the panels and carpet.
Often the manufacturer will hide wires, mechanical or other electronic devices in
the exact locations you wish to install in.
Wet Sounds HTX Series Owner’s Manual
WET SOUNDS HTX SERIES SUBWOOFER AMPLIFIERS
2
Wet Sounds HTX Series Owner’s Manual
INSTALLATION INSTRUCTIONS
Wet Sounds Marine Ampliers are designed for easy installation in your boat. To
ensure proper installation of your new purchase please follow all the suggestions
listed below. If you do not have experience with marine electrical and
mechanical systems contact a professional installer. Paying a qualied
installer is almost always cheaper than paying a dealership to repair your
boat.
LOCATING THE AMPLIFIER
The amplier must be securely mounted to a solid surface. Please select a
dry location to mount your amplier. All Wet Sounds products are designed to
operate in humid environments however direct contact with water can damage
the electronics. Do not mount the amplier to any area that may have excessive
vibration (like a subwoofer enclosure). Position the amplier in an area that
receives sufcient airow for proper heat dissipation.
SUPPLYING ENOUGH POWER
Your amplier does NOT make power; it converts power, or current, from your
boats electrical system and converts it into high power musical energy. If the amp
can’t get all the power it needs it will not produce its full output. Your Wet Sounds
amplier will produce full output longer than other amplies on the market today.
Should your voltage or current drop too low the amplier will drop below the rated
output. Make sure your boats charging system is in good working order. Any high
performance audio amplier will increase the demand on your alternator and
battery. If you are unsure have you charging system checked system testing by a
professional technician.

Especificaciones del producto

Marca: Wet Sounds
Categoría: receptor
Modelo: HTX-6

¿Necesitas ayuda?

Si necesitas ayuda con Wet Sounds HTX-6 haz una pregunta a continuación y otros usuarios te responderán




receptor Wet Sounds Manuales

receptor Manuales

Últimos receptor Manuales