Whynter BH-2200 Manual de Usario

Whynter Libra BH-2200

Lee a continuación 📖 el manual en español para Whynter BH-2200 (7 páginas) en la categoría Libra. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/7

Whynter Digital Body Fat and Water Scale

MODEL: BH-2100/ BH-2200

Please read this instruction booklet completely before operating.

1. SCALE CONSTRUCTION

2. TECHNICAL SPECIFICATION

 Max weight: 150kg / 330lb / 24st

 Min effective: 2kg / 4.4lb

 Weight division: 0.1kg / 0.2lb

 Weight unit: kg-lb-st

 Body fat division: 0.1%

 Age range for body fat: 10-80 years old

 Height range: 100-220cm / 3ft 3.5in-7ft 2.5in

 Fat range: 0-80%

 Water range: 20-80%

 Height unit: cm / ft-in

 Memory: 10 person

 Power: 2x3 V CR2032 Li-battery

3. WORKING PRINCIPLE

■ What is body fat percentage?

Body fat percentage is derived from the ratio between the body weight and body fat.

Due to difference in race and region, the charts above are for reference only.

■ Original Measure Method:

Body fat percentage used to be measured in several ways:

CALIPER: Using hand-held caliper that exert a standard pressure, the skinfold thickness

is measured at various body location.

DEXA: Use a whole body scanner that has x-rays to pass a person’s reclining body to

collect the data.

UNDERWATER WEIGHING: This method measures whole body density by determining

body volume. There is a variety of equipments available to do underwater weighing. It first

requires weighing of a person out of the water and then immersing the person totally in

water and weight again. The densities of bone and muscles are higher than water, and fat

is less dense than water so a person with more bone and muscle will weigh more in water

than a person with more fat.

■ Our Method:

BIA We design our method of body fat percentage measuring as BIA (electronic

impedance analysis). Body impedance is measured when a small and safe electric signal

passes through the body. Body impedance is greatest in fat issue, which fat-free body

mass allows the signal to pass through much more easily. Using the impedance

measurements along with a person’s height, weight, age and gender, the percentage of

body fat and water is calculated.

■Factor affected body fat percentage

Body fat percentage is affected by body hydration. To ensure the accuracy of body fat

percentage, have your body fat percentage measured at night. And there will be little

difference on the reading of the body fat percentage than weighing yourself at different

times of the day. Measuring under consistent environments will yield the best results.

Body fat percentage is also affected by following factor, diet style, drinking too much

alcohol, heavy exercise, certain prescription drugs or diuretics, illness or woman’s

menstrual cycle.

4. MANUAL

■ Button Definition

Press once to start the scale

During setting, press to change the parameter or to confirm the data input

During setting, press to change the parameter

■ Preparation before weighing:

1) Power Supply:

 When the LCD indicates “Lo”, replace battery.

2) Units option: The scale is equipped with LB / KG /ST unit systems. Please choose unit

system on the back of scale as shown in the picture below.

3) Scale position: Always place the scale on hard and flat surface to ensure the accuracy.

▲Attention: Please do not put your foot on the edge of scale to avoid tipping.

To measure the weight, body fat and water percentage

Note:

1. Select a person number (P0-P9) and input your gender, height and age before

standing on the scale.

2. The personal data only needs to be entered once and the scale will store your data

under your person number.

Especificaciones del producto

Marca:	Whynter
Categoría:	Libra
Modelo:	BH-2200
Color del producto:	Black, White
Peso.:	1700 g
Altura:	190.9 mm
Formatos de vídeo soportados:	H.264, MPEG4
factor vorm:	Dome
Soporte de colocación:	Binnen & buiten
Tecnología de conectividad:	Bedraad
red LAN:	Ja
Método de montaje:	Plafond
Resolución Máxima:	720 x 576 Pixels
Número total de megapíxeles:	0.44 MP
Diámetro:	147.4 mm
Tipo de fuente de energía:	Power over Ethernet (PoE)
Iluminación mínima:	0.15 Lux
Lector de tarjetas de memoria integrado:	Ja
Tarjetas de memoria compatibles:	SD, SDHC
Disco duro incorporado:	Nee
Vision nocturna:	Ja
Capacidad de zoom:	Ja
Micrófono, entrada de línea:	Ja
Número de puertos Ethernet LAN (RJ-45):	1
Rango focal:	3.4 - 122.4 mm
Formato de señal analógica:	PAL
Tamaño del sensor óptico:	1/4 "
Conexión para adaptador de red:	Ja
Tipo de sensor de imagen:	CCD
Zoom digital:	12 x
Zoom óptico:	36 x
Velocidad de obturación de la cámara:	1/1 - 1/10000 s
Interfaz:	RJ-45
balance de blancos:	Auto, Manual
Tipo cámarasluiter:	Elektronisch
Resoluciones de gráficos compatibles:	320 x 240,384 x 288,704 x 576,640 x 480 (VGA)
Cumple con los estándares de la industria:	IEEE802.1x, IEEE802.3at
Tecnología de cableado:	10/100Base-T(X)
Temperatura de almacenamiento:	-20 - 60 °C
Máximo 30 cuadros por segundo:	30 fps
Protocolos de red compatibles:	IPv4, IPv6, TCP, UDP, ARP, ICMP, IGMP, HTTP, HTTPS, FTP (client/server), SMTP, DHCP, DNS, NTP, RTP/RTCP, RTSP, SNMP(MIB-2)
Alimentación a través de Ethernet (PoE):	Ja
Control PTZ:	Ja
Procesador mínimo:	Intel Core 2 Duo, 2 GHz
rango de panorámica:	0 - 340 °
Velocidad de giro:	300 °/sec
Velocidad panorámica:	300 °/sec
RAM mínima:	1024 MB
Entrada/salida de alarma:	Ja
Wifi.:	Nee
Consumo de energía (típico):	25 W
Temperatura de funcionamiento (TT):	-5 - 50 °C
Rango de ángulo de inclinación:	0 - 105 °
Ángulo de visión de la lente, horizontal:	1.7 °
Resoluciones PAL:	720 x 576 Pixels