Wilson Electronics NMO Manual de Usario

Wilson Electronics antena de televisión NMO

Lee a continuación 📖 el manual en español para Wilson Electronics NMO (4 páginas) en la categoría antena de televisión. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

Installation

NMO Mount

Antenna

• Vehicle use

• Installs Easily

• Permanent installation

• Requires antenna adapter (sold separately)

• Compatible with Wilson Electronics Signal Booster

(sold separately)

How it Works

Wilson Electronics NMO Mount antenna will collect the cell tower signal and send it through

the cable to a signal booster or directly to the cell phone or cellular data card. When the

cellular device transmits, the signal is transferred to a signal booster or directly to the

antenna and broadcasted back to the cell tower. See the back cover for information on

Wilson Electronics Signal Boosters. An external adapter is required to connect the cell

phone or cellular data card to the antenna.

The external adapter is cell phone/data card-specific and may be purchased through a

local retailer. Refer to Wilson Electronics Adapter Guide to identify the right adapter for your

cell phone or cellular data card. The Adapter Guide is available through a local retailer. It

is also available on our web site, www.WilsonElectronics.com, or you may call Technical

Support at 866-294-1660.

Feed the cable end

(FME) into hole

from outside.

Step 1:

Step 2:

Gently feed NMO

connector through

hole until flush.

For installing ¾ in NMO:

Installing optional NMO Mounts

For installing the NMO Trunk Mount

Antenna (sold separately):

(Part# 901102) (Part# 901101)

Wilson Electronics Signal Boosters Amplify Coverage

When used in conjunction with your antenna, a Wilson Signal Booster can improve

your cell phone and laptop data card coverage area up to 20 times. Wilson Electronics

manufactures a wide range of wireless and direct connect Signal Boosters for mobile or in-

building use. See your dealer for details or visit www.WilsonElectronics.com.

Contact Wilson Electronics Technical Support with any questions at 866-294-1660

Or email: tech@wilsonelectronics.com Hours: 7am to 6pm MST.

Select a location on the trunk or the 1.

hood for mounting the antenna.

Slide the trunk mount bracket on 2.

the trunk or hood lip in the selected

location, and tighten the two set

screws on the bottom lip underneath

the trunk or hood lip with the Allen

wrench provided.

Route the cable between the mount 3.

and phone location.

Screw the antenna coil into place.4.

Inside of

Trunk

Trunk lid

NMO Trunk

Mount Antenna

Car Diagram

Select a location for mounting the antenna. The best

location would be centered on the vehicle roof, although

other locations are acceptable.

Roof mount only: For mounting the antenna to the roof of

your vehicle, use Wilson Electronics part #901102 (3/4”)

or #901103 (3/8”), which must be purchased separately

(A). Drill a hole in the desired location for mounting. The

size of the hole should be 3/8” or 3/4”, depending on the

type of mount purchased.

The plastic washer (B) should be placed over the

threads of the NMO mount (A). From the inside of the

vehicle, insert the threaded portion of the mount up

through the hole in the vehicle.

From the top of the vehicle, screw the threaded nut

roof and tighten until secure.

The black rubber washer (D) should now be

positioned around the threaded nut.

Working from the inside of the vehicle, securely

route and position the cable provided with your

mount to your signal booster or cell phone.

Screw the NMO antenna assembly (E) into place on

top of the vehicle. Part# 301105

Installing the NMO Mount Antenna

Vehicle Mounting Surface

A. Roof Mount

B. Plastic Washer

C. Threaded Nut

D. Rubber Washer

E. NMO Antenna

F. Trunk Mount

Trunk Mount Part # 901101 F

⅜ NMO Part #901103

Shown above.

Contact Wilson Electronics Technical Support with any questions at 866-294-1660

Or email: tech@wilsonelectronics.com Hours: 7am to 6pm MST.

Especificaciones del producto

Marca:	Wilson Electronics
Categoría:	antena de televisión
Modelo:	NMO
Color del producto:	Wit
Ancho:	221 mm
Profundidad:	134.6 mm
Altura:	27.9 mm
Indicadores LED:	LAN, Power, WAN, WLAN
Tipo de embalaje:	Doos
Estándares wifi:	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Puerto USB:	Nee
red LAN:	Ja
Tipo de fuente de energía:	DC
Cables suministrados:	LAN (RJ-45)
Incluye adaptador de CA:	Ja
Número de puertos Ethernet LAN (RJ-45):	4
Conexión para adaptador de red:	Ja
Memoria interna:	64 MB
Ranura para tarjeta SIM:	Nee
Compatibilidad con módem USB 3G/4G:	Nee
banda wifi:	Dual-band (2.4 GHz / 5 GHz)
Estándar Wi-Fi:	Wi-Fi 5 (802.11ac)
Velocidad de transferencia de datos WLAN (máx.):	867 Mbit/s
Velocidad de transferencia de datos WLAN (primera banda):	300 Mbit/s
Velocidad de transferencia de datos WLAN (segunda banda):	867 Mbit/s
Tipo de interfaz Ethernet LAN:	Fast Ethernet
LAN Ethernet, velocidades de transferencia de datos:	10, 100 Mbit/s
Algoritmos de seguridad compatibles:	WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Cantidad de antenas:	4
Nivel de ganancia de antena (máx.):	5 dBi
Soporta Windows:	Windows 10, Windows 2000, Windows 7, Windows 8, Windows 8.1, Windows 98SE, Windows NT, Windows Vista, Windows XP
3G:	Nee
4G:	Nee
Gestión basada en web:	Ja
Soporta el sistema operativo Mac:	MacOS
Compatibilidad con Mac:	Ja
Botón de reinicio:	Ja
Filtrado de direcciones MAC:	Ja
Filtración:	Ja
Red WAN:	Ja
Cortafuegos:	Ja
filtro de dirección IP:	Ja
Corriente de salida:	1 A
Abarcando:	12 V
Guía de Instalación Rápida:	Ja
Memoria flash:	8 MB
Servidor DHCP:	Ja
Plug and Play universal (UPnP):	Ja
Supervisión parental:	Ja
Wi-Fi multimedia (WMM)/(WME):	Ja
cliente DHCP:	Ja
Protocolos soportados:	IPv6
Navegador compatible:	Internet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0
Soporte DMZ:	Ja
Acceso de invitados:	Ja
WAN ADSL:	Nee
5G:	Nee
Seguridad del botón pulsador WPS:	Ja
Tipo de conexión WAN:	RJ-45
Temperatura de funcionamiento (TT):	0 - 40 °C
Humedad relativa de funcionamiento (VV):	10 - 90 procent
Tipo-producto:	Router om neer te zetten
Número-de-productos-incluidos:	1 stuk(s)
Propiedades de VPN:	PPTP/L2TP/OpenVPN/WireGuard
Diseño de antena:	Extern
DNS dinámico (DDNS):	Ja
Reenvío de puertos:	Ja
Poortactivering:	Ja
Número de redes de invitados (5 GHz):	1
Número de redes de invitados (2,4 GHz):	1
Tipo de WAN admitido:	Dynamic IP/Static IP/PPPoE
Radio inalámbrico:	Ja