WMD C4RBN Manual de Usario

Lee a continuación 📖 el manual en español para WMD C4RBN (1 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
HP/BP/LP (LEDs & BUTTON): Cycle
through the 4 POLE frequency re-
sponses. The LED changes imme-
diately but the audio will wait until
the user has made their selection.
Holding the button will delay the
audio change until release.
FM: Inverting attenuator for
scaling the signal at the FM input
jack. Input is exponential and
controls lter cutoff.
V/OCT: Calibrated exponential CV
input for controlling lter cutoff in
the classic keytracking style.
PING: Sending a gate or trigger
into ping generates a fast decay
envelope emulating the response
of a vactrol.
C4RBN
4/2-POLE STATE-VARIABLE FILTER W/ WAVEFOLDING
LP/BP/HP/4 POLE: LP, BP, and HP
are the respective outputs of the
rst 2-Pole lter. 4P is the output
of the 2nd, series, 2-Pole lter with
selectable frequency response and
output wavefolder.
FREQ: Manual lter cutoff
frequency control. 2.5Hz to 10kHz
FOLD/SAT (LEDs & BUTTON):
Press this button to toggle the 4P
output wavefolder. The FOLD LED
will be lit if it is enabled. Hold this
button to cycle through 4 levels of
input saturation. The current level
is indicated by the SAT LED.
RES: Manual and CV control of
lter’s resonance. Self oscillates
above 3’Oclock.
SAT: Analog CV input for the input
saturator. Offers greater control
over the saturation level.
C4RBN builds on WMDs history with state-variable lters adding interface renements and
improved warm environment stability for live performance and beyond. A novel input saturation
circuit and the output wavefolder from WMD’s classic SYNCHRODYNE lter pair together to push
the timbral exibilty to the next level. C4RBN is the building block to life in your eurorack.
IN: Audio input passes through the
input saturator before entering the
rst 2-Pole lter.
SPECS:
Size: 4hp
PCB: 112mm
Depth: 38mm (with cables)
Power: +92mA, -82mA
Memory: 1 save / minute
Audio Input:
100k ohm impedance
20Vpp range
V/Oct Input:
82k ohm impedance
Temperature Compensated
CV Inputs:
>100k ohm impedance
Filter Outputs:
1k ohm impedance
20Vpp range

Especificaciones del producto

Marca: WMD
Categoría: No categorizado
Modelo: C4RBN

¿Necesitas ayuda?

Si necesitas ayuda con WMD C4RBN haz una pregunta a continuación y otros usuarios te responderán




No categorizado WMD Manuales

WMD

WMD C4RBN Manual de Usario

12 Septiembre 2024
WMD

WMD AXYS Manual de Usario

2 Septiembre 2024
WMD

WMD Blender Manual de Usario

2 Septiembre 2024
WMD

WMD S.P.O. Manual de Usario

2 Septiembre 2024
WMD

WMD OSD Manual de Usario

22 Julio 2024

No categorizado Manuales

Últimos No categorizado Manuales