WMD Subway Manual de Usario

Lee a continuación 📖 el manual en español para WMD Subway (1 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
AN (Knob & CV Input): Scans
rough the inputs that are
abled. The potentiometer
comes an attenuator when a CV
applied to the jack.
OUT (Jack & LED): Output of t
the crossfader. Bicolor LED
bipolar signals.
SUBWAY
8 INPUT 1 OUTPUT SCANNING CROSSFADER
INPUTS: DC coupled inputs for
the signals you would like to scan
through.
ENABLES: Buttons that enable and
disable the associated input. When
an input is disabled the signal will
be removed from the scanning
crossfade.
SPECS:
Size: 6hp
Depth: 38mm (with cables)
Power: +80mA, -22mA
100k ohm input/CV impedance
1k ohm output impedance
20Vpp range
Memory:
Front panel settings save to
EEPROM 1 minute after last button
press.
Digitally controlled analog signal
path operates at 48kHz
FADE CURVES: Subway has 3
selectable crossfade curves.
Choose a curve by holding one of
the following buttons on startup:
1. Linear
2. Exponential
3. Equal Power
Subway is the intelligent crossfader for multiple signals that we never knew we needed. Eight
inputs that can all be crossfaded transparently in analog by a smart digital control interface.
The uses for Subway are endless. Dramatically increase the timbral possiblities of your os-
cillator(s) or turn any module with multiple outputs into a continuously crossfading system.
Subway will nd plenty of uses in your rack.

Especificaciones del producto

Marca: WMD
Categoría: No categorizado
Modelo: Subway

¿Necesitas ayuda?

Si necesitas ayuda con WMD Subway haz una pregunta a continuación y otros usuarios te responderán




No categorizado WMD Manuales

No categorizado Manuales

Últimos No categorizado Manuales