Worx WG801 Manual de Usario
Worx
cortasetos
WG801
Lee a continuación 📖 el manual en español para Worx WG801 (28 páginas) en la categoría cortasetos. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/28
20V Cordless Shrub Shear & Grass Shear EN P02
Cisaille à gazon et arbuste sans fil de 20 V F P11
Podadora de arbustos y césped inalámbrica 20V ES P19
2
WARNING: Some dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals known to
the state of California to cause cancer, birth defects
or other reproductive harm. Some examples of these
chemicals are:
● Lead from lead-based paints;
● Crystalline silica from bricks and cement and
other masonry products;
● Arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemical: work in a well ventilated
area, and work with approved safety equipment,
such as those dust masks that are specially designed
to filter out microscopic particles.
WARNING: This product can expose you
to chemicals including lead and Di(2-
ethylhexyl)phthalate (DEHP) which are known
to the State of California to cause cancer and
birth defects or other reproductive harm. For
more information go to www.P65Warnings.
ca.gov.
WARNING: Read all safety warnings and
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current
device (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the
correct power tool for your application. The
correct power tool will do the job better and safer
at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tools operation.
If damaged, have the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and
tool bits etc., in accordance with these
instructions and in the manner intended for
the particular type of power tool, taking
into account the working conditions and
the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified
by the manufacturer. A charger that is suitable
for one type of battery pack may create a risk of
fire when used with another battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may
cause irritation or burns.
6) SERVICE
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts.This will ensure that the
safety of the power tool is maintained.
1. Keep all parts of the body away from the
cutter blade. Do not remove cut material
or hold material to be cut when blades
are moving. Make sure the switch is off
when clearing jammed material. Blades
coast after turn off. A moment of inattention
while operating the hedge trimmer may result in
serious personal injury.
2. Carry the hedge trimmer by the handle
with the cutter blade stopped. When
transporting or storing the hedge trimmer
always fit the cutting device cover. Proper
handling of the hedge trimmer will reduce
possible personal injury from the cutter blades.
3. Hold the power tool by insulated gripping
surfaces only, because the cutter blade
may contact hidden wiring or its own cord.
Cutter blades contacting a live wire may make
exposed metal parts of the power tool live and
could give the operator an electric shock
4. Keep hands away from blade. Contact with
blade will result in serious personal injury.
5. Only use with handle and guard properly
assembled to hedge trimmer. The use of the
hedge trimmer without the proper guard
or handle provided may result in serious
personal injury.
6. Check the hedge for foreign objects, e.g.
wire fences.
Important Safety Instructions
WARNING: When using electric gardening
appliances, basic safety precautions should
always be followed to reduce the risk of fire, electric
shock, and personal injury, including the following:
WARNING: Read all instructions
FOR ALL APPLIANCES
1) Avoid Dangerous Environment - Don’t use
appliances in damp or wet locations.
2) Don’t Use In Rain.
3) Keep Children Away - All visitors should be kept
at a distance from work area.
4) Dress Properly - Do not wear loose clothing or
jewelry. They can be caught in moving parts.
Use of rubber gloves and substantial footwear
is recommended when working outdoors. Wear
protective hair covering to contain long hair.
5) Use Safety Glasses - Always use face or dust
mask if operation is dusty.
6) Use Right Appliance - Do not use appliance for
any job except that for which it is intended.
7) Don’t grasp the exposed cutting blades or cutting
edges when picking up or holding the appliance.
8) Don’t Force Appliance - It will do the job better
and with less likelihood of a risk of injury at the
rate for which it was designed.
3
Especificaciones del producto
| Marca: | Worx |
| Categoría: | cortasetos |
| Modelo: | WG801 |
¿Necesitas ayuda?
Si necesitas ayuda con Worx WG801 haz una pregunta a continuación y otros usuarios te responderán
cortasetos Worx Manuales
5 Septiembre 2024
5 Septiembre 2024
10 Agosto 2024
cortasetos Manuales
- cortasetos Bosch
- cortasetos DeWalt
- cortasetos WOLF-Garten
- cortasetos Al-ko
- cortasetos Ferm
- cortasetos Ozito
- cortasetos Gude
- cortasetos Makita
- cortasetos Hitachi
- cortasetos Black And Decker
- cortasetos Vonroc
- cortasetos Skil
- cortasetos Hyundai
- cortasetos Hanseatic
- cortasetos Ryobi
- cortasetos Florabest
- cortasetos Metabo
- cortasetos Meec Tools
- cortasetos Milwaukee
- cortasetos Hikoki
- cortasetos Sun Joe
- cortasetos Cramer
- cortasetos Sovereign
- cortasetos Einhell
- cortasetos Gardena
- cortasetos Baumr-AG
- cortasetos Ferrex
- cortasetos Husqvarna
- cortasetos Tanaka
- cortasetos Craftsman
- cortasetos Powerplus
- cortasetos Stiga
- cortasetos Cotech
- cortasetos Trotec
- cortasetos Topcraft
- cortasetos Texas
- cortasetos Spear & Jackson
- cortasetos Atika
- cortasetos Honda
- cortasetos Sterwins
- cortasetos Stihl
- cortasetos Dolmar
- cortasetos Shindaiwa
- cortasetos Powerworks
- cortasetos Zipper
- cortasetos Fieldmann
- cortasetos Varo
- cortasetos Pattfield
- cortasetos Fuxtec
- cortasetos Kibani
- cortasetos Grizzly
- cortasetos Cocraft
- cortasetos Maruyama
- cortasetos Batavia
- cortasetos Gardenline
- cortasetos Levita
- cortasetos Efco
- cortasetos Anova
- cortasetos Hurricane
- cortasetos EGO
- cortasetos Palmera
- cortasetos Eurogarden
- cortasetos Garden Feelings
- cortasetos Mr Gardener
- cortasetos Jonsered
- cortasetos Robust
- cortasetos LawnMaster
- cortasetos Ergotools Pattfield
- cortasetos G-Technology
- cortasetos Bestgreen
- cortasetos CMI
- cortasetos MacAllister
- cortasetos Maxbear
- cortasetos Yellow Garden Line
Últimos cortasetos Manuales
18 Octubre 2024
17 Octubre 2024
15 Octubre 2024
15 Octubre 2024
15 Octubre 2024
14 Octubre 2024
13 Octubre 2024
13 Octubre 2024
13 Octubre 2024
11 Octubre 2024