Woxter Fit Care Manual de Usario

Lee a continuación 📖 el manual en español para Woxter Fit Care (4 páginas) en la categoría Massage apparaat. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
Encendido y modo de vibración
1. Antes de un primer uso, cargue la batería al máximo
de su capacidad. Para saber si se p1-ha cargado
completamente, fíjese que la luz led que hay situada en
la parte inferior del cargador, cambie a color verde.
2. Introduzca el cabezal haciendo rosca con sus manos
hacia el cuerpo de la pistola.
3. Encienda el dispositivo, quitando la Presilla en el centro
del masajeador. A continuación presione el botón de
encendido en la parte posterior durante más de 2
segundos hasta que empiece a vibrar.
4. Ajuste el modo de vibración. Cambie entre sus
diferentes modos desde el botón
5. Para cambiar la velocidad de la
vibración o activar el modo calor*, pulse el botón
*Solo compatible con el cabezal
de temperatura
Declaración de conformidad
Importante
1. Con el fin de ser más respetuosos con el medio
ambiente, solo se p1-ha incluido esta guía rápida para una
primera toma de contacto con el producto, le
recomendamos que visite nuestra web www.woxter.es y
descargue y lea las instrucciones completas antes de su
uso diario
2. Este masajeador y todos sus componentes cumplen con
todas las normativas de seguridad europeas, pero le
recomendamos hacer un uso responsable
3. Puede contactar con nosotros a través de
soporte@woxter.es
GARANTÍA.
Este producto cuenta con dos años de garantía, consulte
las condiciones completas en nuestra web
El producto se apaga automáticamente a los 15 minutos
de funcionamiento, el tiempo recomendado para trabajar
la zona afectada.
Declaración de conformidad
QUATROTEC ELECTRÓNICA, S.L. (B-85036887)
P.I. San José de valderas, C/Yunque, nº 15
28918 Leganés- Madrid-España
Fabricado en China
QUATROTEC ELECTRONICA, S.L. declara que este masajeador:
Woxter Fit Care
Cumple con las disposiciones de la DIRECTIVA 2011/65/EU sobre
restricciones a la utilización de determinadas sustancias peligrosas en
aparatos eléctricos y electrónicos y cumple con el estandar:
EN 50581:2012
Madrid, 22 de Enero de 2020
Mario Mateos
CEO- QUATROTEC ELECTRÓNICA, S.L.
www.woxter.es
vibration
Ergonomic
design
Lithium
Battery
massage
accessories
6
Heat
Mode
Up to
50º
Presilla para encender
/apagar el producto
Soporte
Cabezales
ene cualquier problema con el
cionamiento,
o montaje del producto
de contactar con nosotros a tras de:
soporte@woxter.es
Masajeador de mano con 5 cabezales
de masaje y 1 cabezal de calor
ejercer
esión
Para dolores
focalizados
Para grupos
musculares
al de calor
sta 50º
Para una amplia
superficie Para zonas
sensibles
Modo de calor
Esquema de la unidad
Fit Care cuenta con un cabezal térmico que le ayudará a
tratar contracturas, lumbalgias etc. Si el cabezal térmico
es añadido, deberá activar la función CALOR.
Para activar la función Calor, siga estos pasos.
1. Con el producto apagado o desactivado cambie el
cabezal.
2. Quite la presilla de apagado (si estuviera puesta) y
active el funcionamiento con el botón
3. Cambie de modo hasta que el el cabezal deje de
vibrar y presione el botón
Botón de
activación
Cabezal
(6 cabezales
diferentes)
Presilla, quitarla para
encender el
producto y ponerla
para apagarlo
Mango
ergonómico
Al cambiar al cabezal de temperatura, Fit Care detectará que está conectado y
cambiará la tonalidad de los botones de Azul a Rojo.
Botones en azul: Se p1-ha conectado cabezales para masaje
Botones en rojo: Se p1-ha conectado el cabezal de temperatura
Los cabezales se introducen o se quitan mediante rosca. Antes de cambiarlos, pulse
el botón hasta que no produzcan ningún movimiento
Fit Care cuenta con 2 modos
de temperatura que se activan
pulsando el botón
Modo 1. Hasta 40º
Modo 2. Hasta 50º
Fit care
Masajeador de Mano
Power On and vibration mode Features
1. Before a first use, charge the batteries to the
maximum capacity. To know if it has been fully charged,
make sure that the LED light on the bottom of the
charger changes to green.
2. Insert the head and tighten it
3. Turn on the device, removing the Clip in the center of
the massager. Then hold the power button for more
than 2 seconds.
4. Set the vibration mode. Switch between your different
modes from the button
5. To change the speed of vibration or Heat, press the
button 6 different speeds
Important
1. In order to be more environmentally friendly, this quick
guide has only been included for a first contact with the
product, p2-we recommend you visit our website
www.woxter.es and download and read the full
instructions before of your daily use
2. This massager and all its components comply with all
European safety regulations, but we recommend making
responsible use
3. You can contact us through support@woxter.es
WARRANTY.
This product has a two year warranty, see the full
conditions on our website
The product will turn off automatically after 15 minutes of
opeation. That is the recommended time to work on one
desired area of the body.
www.woxter.es
vibration
Ergonomic
design
Lithium
Battery
massage
accessories
6
Heat
Mode
Up to
50º
Clip to turn on / o the
product
Support
Headers
u have any problem with the operation,
duct use or assembly
can contact with us:
soporte@woxter.es
Hand massager with 5 massage heads
and 1 Care head
pressure
For focused
pain
For muscle
groups
re head
to 50º
For a wide area For sensitive
areas
Heat Mode
Unit scheme
Fit Care has a thermal head that will help you treat
contractures, low back pain etc. If the thermal head is
added, you must activate the Care function.
To activate the Heat function, follow these steps.
1. With the product in Power Off, change the head.
2. Remove the power off clip and activate the operation
with the button
3. Change mode until the head stops vibrating
and press the button
Activation
button
Header
(6 headers) Clip, remove it to
turn on the product
and put it to turn it
o
Ergonomic
handle
When switching to the temperature head, Fit Care will detect that it is connected and
will change the hue of the buttons from Blue to Red.
Blue buttons: Heads in Vibration Mode
Red buttons: Head in Temperature Mode
The heads are inserted or removed by thread. Before changing, press the button
until there is no movement
Fit Care has 2 temperature
modes that are activated by
pressing the button
Mode 1. Up to 40º
Mode 2. Up to 50º
Woxter Fit Care is a hand massager that will help you
increase blood flow and rebuild the mobility of your
muscles after long training / exercise sessions. With 5
interchangeable massage heads suitable for activating the
nerve endings of your body and its high capacity battery
and its Heat head for heal contractures and low back pain.
It will become a completely essential accessory in the care
of your health.
Specs:
- 5 interchangeable heads for cervical, head, neck,
muscles ... and head for Heat
- Lithium battery with a long duration
- High quality ABS material with metallic tones texture (soft
touch)
- Touch buttons, turn off / on and adjust the level of
vibration and Care from its buttons
- 3 vibration modes with 6 speeds and 1 mode for Heat
- Ergonomic design, it is very nice to keep
- Dimensions and weight: 30x8x10 cm (without header),
740 gr. Includes bag to keep the headers
Fit care
Massage Gun

Especificaciones del producto

Marca: Woxter
Categoría: Massage apparaat
Modelo: Fit Care

¿Necesitas ayuda?

Si necesitas ayuda con Woxter Fit Care haz una pregunta a continuación y otros usuarios te responderán




Massage apparaat Woxter Manuales

Massage apparaat Manuales

Últimos Massage apparaat Manuales