Xantech D5KP Manual de Usario
Xantech
controlador
D5KP
Lee a continuación 📖 el manual en español para Xantech D5KP (24 páginas) en la categoría controlador. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/24
- 1 -
INSTALLATION INSTRUCTIONS
D5KP
DIGI-5 DDS Digital Distribution System
OLED Keypad for 1-source and 4-source systems
- 2 -
Safety Information
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instruction in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT SAFETY INFORMATION
Read Information — All the safety and operating information should be read before the appliance is operated.
Follow Information — All operating and use information should be followed.
Retain Information — The safety and operating information should be retained for future reference.
Heed Warnings — All warnings on the appliance and in the operating instructions should be heeded.
Wall Mounting — Mounting of this appliance should be done only by an authorized installer.
Ventilation — The appliances should be situated so that their location or position does not interfere with their proper
ventilation. These appliances should never be placed near or over a radiator or heat register. These appliances should not
be placed in a built-in installation such as a bookcase or cabinet that may impede the flow of air through the ventilation
openings.
Non-Use Periods — Appliances that are left unattended and unused for long periods of time should be de-energized.
Grounding or Polarization — Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one blade wider than the other blade. A grounding type plug has two blades and a third grounding
prong. The polarized wide blade and the third prong are provided for your safety. If the provided plug does not fit your
outlet, consult an electrician for replacement of the obsolete outlet.
Power Cord Protection — Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
Water — Do not use the apparatus near water.
Cleaning — Unplug the apparatus from the power outlet before cleaning. Use only a dry cloth to clean the apparatus.
Power Lines — An outdoor antenna should be located away from power lines. When installing an outside antenna
system, extreme care should be taken to avoid touching power lines or circuits, as contact with them may be fatal.
Object and Liquid Entry — Never insert objects of any kind through the openings of these appliances, as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Care should be taken so that
objects do not fall and liquids are not spilled into the appliance through openings in the enclosure.
Servicing — Do not attempt to service these appliances yourself, as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
- 3 -
Damage Requiring Service — These appliances should be serviced by qualified service personnel when:
• A power supply connection or a plug has been damaged or
• If liquid has been spilled into the appliance or objects have fallen into the appliance or
• The appliance has been exposed to water or moisture or
• The appliance does not appear to operate normally or exhibits a marked change in performance or
• The appliance has been dropped or the enclosure damaged.
Replacement Parts — When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards. The Master Control Unit battery should be replaced only after turning the
power off and only by an authorized installer.
Safety Check — Upon completion of any service or repairs to this audio product, ask the service technician to perform
safety checks to determine that the audio product is in proper operating condition.
Lightning Storms — Unplug this apparatus during lightning storms or when unused for long periods of time.
Attachments and Accessories — Use only attachments/accessories specified by the manufacturer.
Cart, Stand, Tripod, Bracket or Table — Use only with a cart, stand, tripod, bracket or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination
to avoid injury from tip over.
Disconnect Device — Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain operable.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or n be determined by turning the television reception, which ca
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by Xantech could void the user’s authority to operate the
equipment
Caring For the D5KP
Clean only with a dry soft cloth.
It is important to properly care for your D5KP Keypad and Amplifier. Follow these guidelines to ensure your device is
preserved and protected.
• Do not expose the D5KP to rain, liquids or moisture for an extended period of time.
• Do not expose the D5KP to temperature extremes.
Operating Temperatures & Environments
Operating Temperature: 32-104°F (0-40° C)
Humidity: 0-90%
Precautions
• Always exercise care when operating the D5KP Keypad and Amplifier.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
• In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power the D5KP off.
Please report the problem to your dealer immediately.
Never attempt to disassemble the D5KP. You will lose any product warranty on the unit.
Especificaciones del producto
Marca: | Xantech |
Categoría: | controlador |
Modelo: | D5KP |
¿Necesitas ayuda?
Si necesitas ayuda con Xantech D5KP haz una pregunta a continuación y otros usuarios te responderán
controlador Xantech Manuales
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
controlador Manuales
- controlador Sony
- controlador Garmin
- controlador Honeywell
- controlador JBL
- controlador Canon
- controlador Hikvision
- controlador Nedis
- controlador Thomson
- controlador Gembird
- controlador Pyle
- controlador Asus
- controlador SilverStone
- controlador RCA
- controlador Niceboy
- controlador Logitech
- controlador BeamZ
- controlador Trust
- controlador Jumbo
- controlador Tripp Lite
- controlador Toa
- controlador DataVideo
- controlador Schneider
- controlador Denon
- controlador Mitsubishi
- controlador Velleman
- controlador Microsoft
- controlador Korg
- controlador Ednet
- controlador Cisco
- controlador Allen & Heath
- controlador Bose
- controlador SBS
- controlador Mackie
- controlador Belkin
- controlador Razer
- controlador DJI
- controlador Nacon
- controlador Supermicro
- controlador GeoVision
- controlador Genesis
- controlador Boss
- controlador Valcom
- controlador Magnus
- controlador Astro
- controlador Speed-Link
- controlador Sven
- controlador Intel
- controlador Sherwood
- controlador Sweex
- controlador Vizio
- controlador Aruba
- controlador Natec
- controlador Ikan
- controlador Chauvet
- controlador One For All
- controlador T'nB
- controlador Tracer
- controlador Rain Bird
- controlador Irritrol
- controlador Vaddio
- controlador Thrustmaster
- controlador Jung
- controlador Saitek
- controlador ATen
- controlador Showtec
- controlador Russound
- controlador Fusion
- controlador Eurolite
- controlador RGBlink
- controlador Xtreme
- controlador IHome
- controlador Infinity
- controlador Homematic IP
- controlador Krom
- controlador Monoprice
- controlador ASTRO Gaming
- controlador Areca
- controlador HyperX
- controlador OSD Audio
- controlador Crestron
- controlador Hori
- controlador Music Hall
- controlador Manfrotto
- controlador Dreamgear
- controlador Monacor
- controlador AirTurn
- controlador Adaptec
- controlador StarTech.com
- controlador SIIG
- controlador KanexPro
- controlador Dangerous Music
- controlador Reely
- controlador Clarity
- controlador Auray
- controlador GOgroove
- controlador Kanlux
- controlador LYYT
- controlador PDP
- controlador Savio
- controlador Inovonics
- controlador 8BitDo
- controlador MOZA
- controlador Steca
- controlador Premier Mounts
- controlador AViPAS
- controlador Kramer
- controlador SmartAVI
- controlador Highpoint
- controlador Atlas Sound
- controlador Gossen Metrawatt
- controlador IVT
- controlador PCE Instruments
- controlador Canyon
- controlador Trenton Systems
- controlador Steelplay
- controlador Gamesir
- controlador AMX
- controlador CTA Digital
- controlador Re.corder
- controlador MuxLab
- controlador Snakebyte
- controlador Nyko
- controlador EXSYS
- controlador Amer
- controlador Juniper
- controlador ALC
- controlador Kanex
- controlador Mitzu
- controlador CoolerMaster
- controlador Dragonshock
- controlador Atlantis Land
- controlador Universal Remote Control
- controlador LumenRadio
- controlador Datapath
- controlador Circle
- controlador Victrix
- controlador Axor
- controlador MOGA
- controlador HuddleCamHD
- controlador Indiana Line
- controlador PTZ Optics
- controlador Balam Rush
Últimos controlador Manuales
26 Octubre 2024
18 Octubre 2024
16 Octubre 2024
16 Octubre 2024
13 Octubre 2024
6 Octubre 2024
4 Octubre 2024
3 Octubre 2024
3 Octubre 2024
3 Octubre 2024