Xantech J-BOX BLAST-IR Manual de Usario

Xantech Destello J-BOX BLAST-IR

Lee a continuación 📖 el manual en español para Xantech J-BOX BLAST-IR (4 páginas) en la categoría Destello. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

- 1 -

INSTALLATION INSTRUCTIONS

380-20

Single Gang, J-BOX, BLAST-IR™ Emitter

DESCRIPTION

The 380-20 J-BOX BLAST-IR™ contains three high-intensity Infrared LEDs housed in a metal

enclosure that can easily be mounted inside a standard, single gang, J-BOX electrical receptacle.

The benefit of the 380-20 is that it can “flood” an enclosed area with an infrared signal. The 380-20

comes with mounting screws and a Decora® style insert that can be used with the popular Decora®

faceplate.

SPECIFICATIONS

 +12VDC, 200mA.

 Red IR talk-back LED (internal).

 Dimensions: 1-3/4” W x 4” H x 1-1/4” D.

 Recommended wire requirements: 3 or 4 conductor, 22 gauge solid or stranded wire up to

600 feet (unshielded OK).

 Able to achieve a distance well over 30 feet.

Breakawa

plaster-ears

Red IR talk-back LED

6-32 Threaded hole

(

)

for

Decora® -style cover plate

J-Box mountin

hole

(

)

4-Pin matin

plu

(included)

h-intensit

infrared LED

Decora

Insert with dark

tinted lens cover

(included)

Decora

faceplate

(not included)

- 2 -

INSTALLATION

The 380-20 is intended to be wired to the terminals of any Xantech connecting block such as the

CB12 and 789-44. Use 3 or 4 conductor cable, as specific above, to run between the connecting

block and the 380-20. The conductor cable will be used to connect the +12VDC, IR BUS, and

GROUND terminals.

While it is possible to make wired connections without a Xantech connecting block, it is not

recommended. The Xantech connecting block reduces installation time, helps to eliminate errors,

allows easy troubleshooting, and permits easy system upgrades later, if needed.

Connecting the power supply to the connecting block must be the last step. Be sure to verify all wires

are connected to the correct terminals. Incorrect connections may destroy the product. Two 380-20’s

may be connected in parallel.

Figure 1: 380-20 Basic IR Repeater System. 380-20 IR Repeater System.Figure 2:

NOTE: The 380-20 infrared intensity is so great that it is possible to place the unit in an indirect view

of the components to be controlled. This is due to the infrared waves “bouncing” off a wall and/or

object. An ideal location would be an enclosed closet where the system components are stored. It is

strongly recommended to experiment with the 380-20’s exact location before installing the single

gang box, J-Box, receptacle.

The three high-intensity infrared LEDs (light-blue) located on the front of the product are not visible to

the human eye. The red talk-back LED indicates the 380-20 is receiving an IR signal at the input.

- 3 -

Adding IR Attenuators

In the event that the infrared (IR) signal is judged to be too intense, apply the included IR attenuators

(white discs). The IR attenuators are to be placed between the 380-20 LED and the lens on the

Decora® style insert.

Simply place the white disc between the light blue LED emitter and the lens.

Power Supply

It is recommended to use a +12Vdc, 200mA power supply.

Xantech’s 782-00 or 781RG power supply is acceptable for use with this product.

IR Compatibility

Due to various IR command structures, the 380-20 may not be compatible with certain brand name

components. It is highly recommended to test the 380-20 and all devices that it will control before final

installation.

Especificaciones del producto

Marca:	Xantech
Categoría:	Destello
Modelo:	J-BOX BLAST-IR
Color del producto:	Zwart
Peso.:	146 g
Ancho:	86 mm
Profundidad:	58.5 mm
Altura:	23.5 mm
Material de la carcasa:	Kunststof
Indicadores LED:	Stroom
Capacidad del acumulador/batería:	5200 mAh
Actual:	0.800 A
Cables suministrados:	USB
Número de conexiones USB:	2
Voltaje de entrada:	5 V
Fuente de carga:	DC, USB
Protección de voltaje de energía:	Overcharge, Overdischarge
Corriente de salida:	2.1 A
Abarcando:	5.3 V
Compatibilidad del cargador:	Universeel
Número de dispositivos conectados simultáneamente (máx.):	2
Temperatura de funcionamiento (TT):	-10 - 50 °C
Tecnología de batería:	Lithium-Ion (Li-Ion)
Tiempo de carga de batería/acumulador (USB):	12 uur