Xsarius SG-3100 DiSEqC H-H Motor Manual de Usario
Xsarius
Receptor digital
SG-3100 DiSEqC H-H Motor
Lee a continuación 📖 el manual en español para Xsarius SG-3100 DiSEqC H-H Motor (12 páginas) en la categoría Receptor digital. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/12
Manual
High-end DiSEqC 1.2 satellite rotor
Xsarius SG-3100 DiSEqC H-H Mount
INSTALLING THE MOUNT
1.Assemble the H-H Mount as the following diagram.
2.Make sure the mounting tube indicates 0°.Otherwise, driver the mounting tube 2 to exact 0°
via the manual buttons on the bottom of the mount(the cable must be connected to the
receiver that is switched on).
3.Make sure the mounting pole is exactly vertical before installation.
4.Fix the H-H Mount onto the Mounting pole or stand and tighten the two U-screws 4 by the
clamp 6 and nut 5 evenly. Make sure there is no obstacle in the southern sky, such as a tree
or building.
1
ALIGNMENT OF THE MOUNT
1. Aiming TRUE SOUTH.
Attaching the Antenna Dish to the Mount. Make sure it is at the center of the mounting tube.
Rotate the mount together with the antenna toward TRUE SOUTH. You can nd the TRUE
SOUTH via the magnetic variation table and a compass that indicates the MAGNETIC
SOUTH.
2. Setting Elevation Angle.(A)
Adjust the motor elevation angle via the Inclinoneter or the Elevation / Latitude scale on both
sides of the Motor according to the Latitude of your position.
3. Setting Declination Angle.(B)
Find the Declination Angle by the attached ANGLE TABLE.
Set the Declination Angle by the scale on the antenna dish. The reading on the antenna scale
should be:
35°-DECLINATION ANGLE
4. Drive the antenna east and west via the manual buttons on the bottom of the Mount to check if
the reception arc is correct. If not , adjust the direction, elevation, and declination angle to nd the
best reception.
P.S. In order to have power to drive the antenna, please connect the Mount to the receiver or
interface box via coaxial cable rst.
2
Especificaciones del producto
Marca: | Xsarius |
Categoría: | Receptor digital |
Modelo: | SG-3100 DiSEqC H-H Motor |
¿Necesitas ayuda?
Si necesitas ayuda con Xsarius SG-3100 DiSEqC H-H Motor haz una pregunta a continuación y otros usuarios te responderán
Receptor digital Xsarius Manuales
5 Septiembre 2024
Receptor digital Manuales
- Receptor digital Samsung
- Receptor digital Daewoo
- Receptor digital Grundig
- Receptor digital Amiko
- Receptor digital Matsui
- Receptor digital Telestar
- Receptor digital Sagem
- Receptor digital Technisat
- Receptor digital Kathrein
- Receptor digital Vodafone
- Receptor digital Topfield
- Receptor digital Metronic
- Receptor digital TV STAR
- Receptor digital Humax
- Receptor digital Technicolor
- Receptor digital Homecast
- Receptor digital Emtec
- Receptor digital T-Mobile
- Receptor digital Aston
- Receptor digital Xoro
- Receptor digital Sagemcom
- Receptor digital Vuplus
- Receptor digital Ten Haaft
- Receptor digital Primacom
- Receptor digital SAB
- Receptor digital Techion
- Receptor digital Xtrend
- Receptor digital TelSKY
- Receptor digital Online
- Receptor digital Lorenzen
- Receptor digital Rebox
- Receptor digital Digitalbox
- Receptor digital Opticum
- Receptor digital Solcon
- Receptor digital FTE Maximal
- Receptor digital Telekom
- Receptor digital Konig Electronic
- Receptor digital Dream
- Receptor digital ZapMaster
- Receptor digital Synaps
- Receptor digital Unity
- Receptor digital Sky
- Receptor digital SetOne
- Receptor digital XMS
- Receptor digital MKDigital
- Receptor digital Universum
Últimos Receptor digital Manuales
15 Octubre 2024
20 Septiembre 2024
18 Septiembre 2024
17 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024