XYZprinting RFPLCXUS04E Manual de Usario

XYZprinting No categorizado RFPLCXUS04E

Lee a continuación 📖 el manual en español para XYZprinting RFPLCXUS04E (1 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

Filament Replacement Instructions

Take out the stopper by

rotating anti-clockwise.

Remove the stopper Lift the cartridge Change the ﬁlament

and chip

Close the cartridge

Screw in the stopper

tightly

Take out the accessories

from the ﬁlament cartridge

and replace them with new

accessories.

A. Filament parameter chip

B. Filament

C. Desiccant pouch

Press the joint of the casing

of the ﬁlament cartridge

gently and open it.

Put a new filament parameter

chip in place. Make sure it is

placed in the correct direction.

Reassemble the cartridge

and pull the ﬁlament to

make sure it is discharged

smoothly.

Replace the stopper and

screw it up clockwise.

Turn the cartridge over

and make sure the

stopper has been

tightened to its position.

Put a new desiccant pouch

in place.

Direct the ﬁlament through

the guide hole to put out

the ﬁlament easily.

1-1

1-2

2-1 3-1 4-1

4-2

5-1

5-2

3-3

2-2

345

Note

1. Do not use the filament cartridge in an environment with heavy dust or high humidity.

2. Unsealed filament kit must be used as soon as possible to ensure good printing quality.

3. If product is defective out of the box, please contact customer service and return the filament and parameter

chip with the original packing for exchange.

3-2

Especificaciones del producto

Marca:	XYZprinting
Categoría:	No categorizado
Modelo:	RFPLCXUS04E
Color del producto:	Blue, Silver
Peso.:	2300 g
Ancho:	350 mm
Profundidad:	350 mm
Altura:	190 mm
Tipo de fuente de energía:	AC
Carga de trabajo máxima:	- bar
voltaje-de-entrada-de-CA:	220-240 V
Frecuencia-de-entrada-de-CA:	50-60 Hz
Velocidad de flujo:	2500 L/u