Yale PIR Image Camera Manual de Usario

Yale Seguridad PIR Image Camera

Lee a continuación 📖 el manual en español para Yale PIR Image Camera (2 páginas) en la categoría Seguridad. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/2
Description:
1) Learn/Test Button with LED
Send test signal: hold and release within 3 secs.
This is used when checking accessory range
(See Smart Home Alarm user manual).
Send learn signal: hold for 10 secs+. Learn
button LED will flash when learn signal is sent.
2) Camera Flash
3) Camera
4) 2 x 1.5V AA Alkaline batteries
5) Cover tamper switch
Pack contents
• 1 x PIR Image Camera with batteries
• 4 x wall plugs & screws
Program your PIR before installation and test
afterwards. Please see your current Smart Home
Alarm user manual.
SPECIAL NOTE:
When inserting new batteries, the following are
disabled for 5 minutes.
• Tamper Switch
• Image will not be sent in the first 5 minutes
Please make sure you do not trigger the PIR
Video Camera for 5 minutes before testing the
system.
Compatible with Yale Smart Home Alarms
(SR-range) ONLY.
PIR Image Camera
(SR-PC)
smart
Living
3
2
1
4
5
Programming & Installation
For more information on this product
and Yale Smart Living Range visit
www.yale.co.uk/smart-living
Consumer Support: info@yale.co.uk
2
The 2 year guarantee for this
Yale Smart Home Alarm Kit is
active from the date of purchase
(A copy of this guarantee is
available on our website).
Sleep Timer
The PIR features an automatic “sleep time” of
approximately 1 minute for power conservation.
After transmitting a detected motion, the PIR will
not retransmit for 1 minute. Any further motion
detected within this one-minute sleep period will
extend the sleep time by another minute.
LED indicator
Off Normal operation
LED flash
(2 sec)
When motion is detected and the
LED flashes for 2 seconds, this
indicates one of the following:
• Low battery
• Tamper switch activated
• PIR in test mode
WARNING:
When you delete the PIR Video Camera from
the system, please ensure the PIR batteries are
removed to avoid unnecessary drain.
Environmental conditions:
-10oc to 40oc , relative humidity 85%
non-condensing. Indoor use only
Radio:
2.4GHz
Motion Detection Range:
110o
Specification
Operation
Note: Waste electrical products and batteries should not be disposed
of with household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice.
Issue No. 1A
Information and illustrations are subject to change.
Yale reserves the right to alter the specification and
product design at any time without notice.

Especificaciones del producto

Marca: Yale
Categoría: Seguridad
Modelo: PIR Image Camera

¿Necesitas ayuda?

Si necesitas ayuda con Yale PIR Image Camera haz una pregunta a continuación y otros usuarios te responderán


Seguridad Yale Manuales

Yale

Yale SR Series - Smarthome Alarm Manual de Usario

6 Septiembre 2024
Yale

Yale PIR Image Camera Manual de Usario

6 Septiembre 2024
Yale

Yale SR330 Manual de Usario

6 Septiembre 2024

Seguridad Manuales

Últimos Seguridad Manuales

Honeywell

Honeywell Galaxy G3 Manual de Usario

24 Octubre 2024
Abus

Abus fubw50020 Manual de Usario

22 Octubre 2024
Honeywell

Honeywell HRGX85X Manual de Usario

21 Octubre 2024
Alphatronics

Alphatronics AlphaVision NG Manual de Usario

20 Octubre 2024
Aritech

Aritech SHATTERPRO 3 Manual de Usario

20 Octubre 2024
Axis

Axis Camera Station S9001 Mk II Desktop Terminal Manual de Usario

18 Octubre 2024
Eminent

Eminent EM6511 Manual de Usario

18 Octubre 2024
Eminent

Eminent EM6104 Manual de Usario

18 Octubre 2024
Hikvision

Hikvision DS-2CD2232 Manual de Usario

18 Octubre 2024
NetworX

NetworX NX-595E IP Communication Module Manual de Usario

5 Octubre 2024