Yamaha DTXHP570 Manual de Usario

Lee a continuación 📖 el manual en español para Yamaha DTXHP570 (3 páginas) en la categoría Instrumento musical. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/3
SETUP GUIDE - 502 SERIES HYBRID PACKSyDTX
Model:!DTXHP587 / DTXHP580 / DTXHP570:!
!
1. Attach the module, triggers and pad(s) to your acoustic drum set.! !
! ! !a. Attach the DTX502 Module to a hi-hat/cymbal stand using the CSAT924A.!
! ! ! !b. Attach DT20 triggers to kick and snare away from strike-zone with strong tape.
! ! !c. Attach the electronic drum pad(s) to your kit using CSAT924A and CL940.!
2. Connect the triggers/pads to DTX502 module using supplied cables.! !
! ! ! !a. Connect the on the bass drum to the trigger input.DT20 KICK/8
! ! ! !b. Connect the on the snare drum to the trigger input.DT20 SNARE
! ! !c. Connect the pad to the TP70 TOM3/12 input* (for DTXHP570/HP587).!
! ! ! !d. Connect the pad to the input* (for DTXHP580/HP587).XP80 RIDE
!
3a. Complete the Initial Setup process and create a custom Trigger Setup.*! !
! ! ! !a. When turning on the DTX502 module for the first time, you are required to:
! ! ! !i) Select your kit. For select Hybrid Packs “DrumTrig” and press [ENTER].!
! ! ! !ii) Select the Auto Power-off time to desired setting and press [ENTER].!
!
!
!
!
*Or other compatible input. The Initial Setup is explained on page 13 of the DTX502 owner manual, and Trigger Setup on page 66.
You can also create a Hybrid Setup using the “DTX502 Touch” v2.0 app for iOS devices when connected to the DTX502 via USB.!
For more information and video tutorials visit www.YamahaDTX.com
Select your kit
Au to Power Off
timer=
DrumTrig
10min
SETUP GUIDE - 502 SERIES HYBRID PACKSyDTX
!
3b. Select the Pad Type(s) for the drum pad(s) in your Hybrid Pack.! !
! ! !a. Press [SHIFT] + [SAVE/ENTER] to access the MENU.!
! ! !b. Use the Data Dial to select menu 6:Trigger.!
!
!
!
!
! ! !c. Cursor right [>] to TRG3 page, and strike the drum pad(s) to select it.!
! ! !d. For the (in Tom3 input) select .TP70 TM:TP70S/70 !
! ! ! !For the (in Ride input) select (tom) or (snare).XP80 TM:XP80 SN:XP80
!
!!!
! ! !e. SAVE the User Trigger Setup into memory by pressing [SAVE/ENTER]. Select !
!!!a destination user setup (15-30) with the Data Dial. To rename the setup, move !
!!!the cursor with the [<][>] buttons and turn the Data Dial to change the character. !
! ! ! !
!
!
Press [SAVE/ENTER] and you will be asked confirm.!
Press [SAVE/ENTER] again to execute the operation. Press [KIT] and start playing!!
!
You may need to adjust the Gain setting for the triggers as the performance depends
on the acoustic drum surface and trigger placement. The trigger setup you just
created will remain active when you startup the DTX502. You can create up to 16
user trigger setups for all kinds of Hybrid applications that can be recalled at
anytime. Use the Trigger Setup Link to automatically ‘link’ a trigger setup with any
Kit. Always perform a “shutdown’ when turning off power to the DTX502.
For more information and video tutorials visit www.YamahaDTX.com
>TRG3 Ride 00%
SN:XP80
>TRG3 Tom3 00%
TM:TP70S/70
TRG save to 15
:[DrumTrig]
TRG save to 16
:[MyHybri ] d
TRG save to 16
Are you sure?

Especificaciones del producto

Marca: Yamaha
Categoría: Instrumento musical
Modelo: DTXHP570

¿Necesitas ayuda?

Si necesitas ayuda con Yamaha DTXHP570 haz una pregunta a continuación y otros usuarios te responderán