Yamaha MG166CX Manual de Usario

Yamaha consola de mezclas MG166CX

Lee a continuación 📖 el manual en español para Yamaha MG166CX (29 páginas) en la categoría consola de mezclas. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/29

EnglishDeutschFrançaisEspañol

Features

Input Channels...................................................................page 12

With up to 16 (MG166CX/MG166C: 10) mic/line inputs or up to four

stereo inputs, the MG mixer can simultaneously connect to a wide

range of devices: microphones, line-level devices, stereo

synthesizers, and more.

Compression......................................................................page 10

Compression increases the overall level without introducing

distortion by compressing excessive peaks in the signals from

microphones and guitars.

AUX Sends and Stereo AUX Return.................................page 16

You can use the AUX SEND jack to feed the signal sent to an

external signal processor, and then return the processed stereo

signal through the RETURN jack.

High-quality digital effects (MG166CX)....................pages 15, 19

With digital effects built in, the MG166CX can deliver a wide range

of sound variations all by itself.

Caractéristiques

Canaux d’entrée.................................................................page 48

Avec 16 entrées micro/ligne (MG166CX/MG166C: 10) ou quatre

entrées stéréo maximum, la console de mixage MG peut connecter

simultanément une grande variété d’appareils : micros, appareils

de ligne, synthétiseurs stéréo, etc.

Compression......................................................................page 46

La compression augmente le niveau général sans engendrer de

distorsion en comprimant les pics excessifs des signaux des

micros et des guitares.

Envois AUX et retour AUX stéréo.....................................page 52

Vous pouvez utiliser la prise jack AUX SEND pour envoyer le signal

vers une unité de traitement de signaux externes, puis pour

renvoyer le signal stéréo traité via la prise jack RETURN.

Effets numériques de qualité supérieure (MG166CX)

...pages 51, 55

Grâce aux effets numériques intégrés, la console MG166CX peut

proposer de nombreuses variations de sons.

Funktionen

Eingangskanäle..................................................................Seite 30

Mit bis zu 16 Mikrofon-/Line-Eingängen (MG166CX/MG166C: 10)

oder bis zu vier Stereoeingängen können viele Geräte gleichzeitig

am MG-Mischpult angeschlossen werden: Mikrofone, Geräte mit

Leitungspegel, Stereo-Synthesizer uvm.

Kompression......................................................................Seite 28

Kompression erhöht den Durchschnittspegel, ohne Verzerrung

hinzuzufügen, indem übermäßige Pegelspitzen der Signale von

Mikrofonen oder Gitarren komprimiert werden.

AUX Sends und Stereo AUX Return.................................Seite 34

Von der AUX SEND-Buchse können Sie das Signal einzeln an

einen externen Signalprozessor führen, und das verarbeitete

Stereosignal über die RETURN-Buchse zurück in das Pult führen.

Hochwertige Digitaleffekte (MG166CX)....................Seiten 33, 37

Mit den eingebauten digitalen Effekten kann das MG166CX aus

sich heraus eine Reihe von Klangvariationen liefern.

Características

Canales de entrada.........................................................página 66

Con un máximo de 16 entradas de micrófono/línea

(MG166CX/MG166C: 10) o cuatro entradas estereofónicas, la

mezcladora MG puede conectarse simultáneamente con una gran

variedad de dispositivos: micrófonos, dispositivos de nivel de línea,

sintetizadores estereofónicos, etc.

Compresión.....................................................................página 64

La compresión aumenta el nivel general sin causar distorsión,

mediante la compresión del exceso de picos en las señales de los

micrófonos y guitarras.

Envíos AUX y retorno AUX estereofónico....................página 70

Puede utilizar la toma AUX SEND para introducir la señal enviada

en un procesador de señales externo y luego devolver la señal

estereofónica procesada a través de la toma RETURN (retorno).

Efectos digitales de alta calidad (MG166CX)........páginas 69, 73

Gracias a sus efectos digitales incorporados, la mezcladora

MG166CX puede producir por sí misma una amplia gama de

variaciones de sonido.

Owner’s Manual

Bedienungsanleitung

Mode d’emploi

Manual de instrucciones

MG206C/MG166CX/MG166C Owner’s Manual

* This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd. (2 wires)

IMPORTANT NOTICE FOR THE UNITED KINGDOM

Connecting the Plug and Cord

IMPORTANT. The wires in this mains lead are coloured in accordance with the following code:

BLUE : NEUTRAL

BROWN : LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured makings identifying the terminals

in your plug proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth terminal of the three pin plug.

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements. Modiﬁ-

cations not expressly approved by Yamaha may void your

authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories

and/or another product use only high quality shielded cables.

Cable/s supplied with this product MUST be used. Follow all

installation instructions. Failure to follow instructions could

void your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply

with the requirements listed in FCC Regulations, Part 15 for

Class “B” digital devices. Compliance with these require-

ments provides a reasonable level of assurance that your use

of this product in a residential environment will not result in

harmful interference with other electronic devices. This

equipment generates/uses radio frequencies and, if not

installed and used according to the instructions found in the

users manual, may cause interference harmful to the opera-

tion of other electronic devices. Compliance with FCC regula-

* This applies only to the MG166CX distributed by YAMAHA CORPORATION OF AMERICA, not the MG206C/MG166C. (class B)

tions does not guarantee that interference will not occur in all

installations. If this product is found to be the source of inter-

ference, which can be determined by turning the unit “OFF”

and “ON”, please try to eliminate the problem by using one of

the following measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line ﬁlter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead,

change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to distrib-

ute this type of product. If you can not locate the appropriate

retailer, please contact Yamaha Corporation of America,

Electronic Service Division, 6600 Orangethorpe Ave, Buena

Park, CA90620

The above statements apply ONLY to those products distrib-

uted by Yamaha Corporation of America or its subsidiaries.

FCC INFORMATION (U.S.A.)

MG206C/MG166CX/MG166C Owner’s Manual 3

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, ﬁre or other hazards. These precautions include, but are not limited to, the following:

• Only use the voltage speciﬁed as correct for the device. The required voltage is

printed on the name plate of the device.

• Use only the included power adaptor (PA-30 or an equivalent recommended by

Yamaha).

• Do not place the power cord near heat sources such as heaters or radiators, and

do not excessively bend or otherwise damage the cord, place heavy objects on

it, or place it in a position where anyone could walk on, trip over, or roll anything

over it.

• Do not open the device or attempt to disassemble the internal parts or modify

them in any way. The device contains no user-serviceable parts. If it should

appear to be malfunctioning, discontinue use immediately and have it inspected

by qualiﬁed Yamaha service personnel.

• Do not expose the device to rain, use it near water or in damp or wet conditions,

or place containers on it containing liquids which might spill into any openings.

• Never insert or remove an electric plug with wet hands.

• If the power cord or plug becomes frayed or damaged, or if there is a sudden

loss of sound during use of the device, or if any unusual smells or smoke

should appear to be caused by it, immediately turn off the power switch,

disconnect the electric plug from the outlet, and have the device inspected by

qualiﬁed Yamaha service personnel.

• If this device or the AC power adaptor should be dropped or damaged,

immediately turn off the power switch, disconnect the electric plug from the

outlet, and have the device inspected by qualiﬁed Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the device or other property. These precautions include, but are not limited to, the following:

• Remove the electric plug from the outlet when the device is not to be used for

extended periods of time, or during electrical storms.

• When removing the electric plug from the device or an outlet, always hold the

plug itself and not the cord. Pulling by the cord can damage it.

• To avoid generating unwanted noise, make sure there is adequate distance (50

cm or more) between the AC power adaptor and the device.

• Do not cover or wrap the AC power adaptor with a cloth or blanket.

• Before moving the device, remove all connected cables.

• When setting up the device, make sure that the AC outlet you are using is easily

accessible. If some trouble or malfunction occurs, immediately turn off the

power switch and disconnect the plug from the outlet. Even when the power

switch is turned off, electricity is still ﬂowing to the product all the minimum

level. When you are not using the product for a long time, make sure to unplug

the power cord from the wall AC outlet.

• If this device is to be mounted in an EIA-standard rack, leave the back of the rack

open and make sure that it is at least 10 cm away from walls or surfaces. Also, if

this device is to be mounted with devices that tend to generate heat, such as

power ampliﬁers, be sure to keep an adequate gap between this device and the

heat-generating devices or install ventilation panels to prevent high

temperatures from developing inside this device.

Inadequate ventilation can result in overheating, possibly causing damage to the

device(s), or even ﬁre.

• Avoid setting all equalizer controls and faders to their maximum. Depending on

the condition of the connected devices, doing so may cause feedback and may

damage the speakers.

• Do not expose the device to excessive dust or vibrations, or extreme cold or heat

(such as in direct sunlight, near a heater, or in a car during the day) to prevent

the possibility of panel disﬁguration or damage to the internal components.

• Do not place the device in an unstable position where it might accidentally fall

over.

• Do not block the vents. This device has ventilation holes at the bottom/rear to

prevent the internal temperature from becoming too high. In particular, do not

place the device on its side or upside down. Inadequate ventilation can result in

overheating, possibly causing damage to the device(s), or even ﬁre.

• Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile

phone, or other electric devices. Doing so may result in noise, both in the device

itself and in the TV or radio next to it.

Power supply/Power cord

Do not open

Water warning

If you notice any abnormality

Power supply/Power cord

Location

(5)-4 1/2

Especificaciones del producto

Marca:	Yamaha
Categoría:	consola de mezclas
Modelo:	MG166CX
Tipo de operación:	Knoppen
Color del producto:	Crème
Pantalla incorporada:	Nee
Ancho:	600 mm
Profundidad:	460 mm
Altura:	- mm
Nivel de ruido:	67 dB
Clase-de-eficiencia-energética:	A
Consumo-anual-de-energía:	- kWu
Amable:	Muurmontage
Potencia del motor:	- W
Motor incluido:	Ja
Número de motores:	1
Capacidad máxima de extracción:	600 m³/uur
Método de extracción:	Afvoerend/recirculerend
Número de lámparas:	2 gloeilamp(en)
Tipo de lámpara:	LED
Tipo filtro veterinario:	Aluminium
Altura (mín.):	544 mm
Altura (máx.):	984 mm
Número de filtros:	2 stuk(s)
Número de velocidades:	4
voltaje-de-entrada-de-CA:	220-240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz