Yardforce NX 80i Manual de Usario

Yardforce Cortacésped NX 80i

Lee a continuación 📖 el manual en español para Yardforce NX 80i (12 páginas) en la categoría Cortacésped. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/12

NX 60i / 80i/ 100i

ROBOTIC MOWER

Original Installation Guide

MÄHROBOTER

Original Installationsanleitung

ROBOSEKACKA

Originální instalační průvodce

ROBOT-TONDEUSE

Guide d’installation d’origine

ROBOTMAAIER

Originele handleiding

ROBOT KOSZĄCY

Oryginalna instrukcja

CZ PL

max.

8 m

min.

2 m

30 cm

5 cm

< 10 cm

> 10 cm

Description of product

1. STOP button

2. Ultrasonic sensor

3. Charging inlet

4. Rear wheel

5. Height adjustment dial

6. Control panel

7. Blade plate

8. Carry handle

9. Power switch button

Scope of delivery

Original

instrcution

Warranty

Installation

guide

Robotic Mower

Wire pegs

Manuals

Spare blades

Extension cord

Docking station

Connectors

Measurement ruler Boundary wire

Switching Power Supply

CONTENT

Description of the product .............................................1

Installation ..................................................................... 2

Operation ...................................................................10

Technical data ..............................................................14

Maintenance and storage .............................................15

Troubleshooting ............................................................17

2 3

GB GB

Stones

We recommend clearing the lawn of small (less than 100 mm high) rocks and stones and any

stones with a round or sloped edge. The Robotic Mower might try and climb such rocks instead

of recognising them as a barrier. The Robotic Mower getting stuck on such a stone requires user

intervention to restart mowing. Contact with stones can result in damage to the blades.

Slopes

The Robotic Mower can navigate slopes up to a maximum of 40% incline or decline.

The boundary wire should never be perpendicular to an incline of more than 10%. Also, leave

strip of at least 2 m between a slope of 10% or steeper and the boundary wire. Otherwise, the

higher speed going down the slope may cause the Robotic Mower to go over the boundary wire,

especially on wet and slippery ground.

Paths, Driveways and Roads

If an elevated driveway crosses your lawn, better keep it outside the boundary wire.

Please allow a safety distance of 30 cm between driveway and boundary wire.

If the driveway and lawn are at the same level, feel free to use the boundary wire to create a

corridor. This allows your Robotic Mower to cross the driveway and reach the opposite lawn.

Installation

Installation Guide

This chapter explains how to install the Robotic Mower. Please read this completely before you

start the installation.

Introduction

We recommend creating a drawing of your lawn, including all obstacles and how these should be

protected. This makes it easier to find a good position for the docking station and how to correctly

place the boundary wire around your garden perimeter protecting bushes, flower beds etc. You

will also need some tools, like a hammer and wire cutters, pliers or scissors.

Pre Cut your lawn

Your lawn needs to be prepared correctly, prior to installing the robot lawnmower.

Pre cut your lawn to a height of 60 mm.

Cutting limitations

The Robotic Mower is equipped with collision sensors. These detect all rigid and solid obstacles

that are higher than 100 mm, such as walls, fences and garden furniture.

When the sensors report an obstacle, the Robotic Mower stops, backs up and then mows in a

different direction. As a long-term solution, it is recommended to lay the boundary wire accordingly

using the ruler to protect obstacles and the device. Lay the boundary wire so that the Robotic

Mower is not more than 20 m away from the boundary wire at any point in the mowing area.

Trees

The Robotic Mower treats trees as common obstacles, but if the roots of the tree are exposed and

lower than 100mm, this area should be excluded using boundary wire in order to protect the tree

root, cutting blades or rear wheels from damage.

< 60mm

< 60 mm

> 60 mm

100 mm

min.

>10%

< 40%

> 40%

Especificaciones del producto

Marca:	Yardforce
Categoría:	Cortacésped
Modelo:	NX 80i
Color del producto:	Wit
Peso.:	670 g
Amable:	IP-beveiligingscamera
Código de seguridad internacional (IP):	IP67
Bluetooth:	Nee
Capacidad máxima de la tarjeta de memoria:	128 GB
Formatos de vídeo soportados:	H.264, H.265
factor vorm:	Dome
Soporte de colocación:	Binnen & buiten
Tecnología de conectividad:	Bedraad
red LAN:	Nee
Método de montaje:	Plafond
Resolución Máxima:	1920 x 1080 Pixels
Número total de megapíxeles:	2 MP
Tipo de fuente de energía:	DC, PoE
Salida de corriente (voltios):	12
Iluminación mínima:	- Lux
Número de cámaras:	1
Lector de tarjetas de memoria integrado:	Ja
Tarjetas de memoria compatibles:	SD
Disco duro incorporado:	Nee
Vision nocturna:	Ja
tipo LED:	IR
Rango focal:	2.8 - 12 mm
Tamaño del sensor óptico:	1/2.9 "
Tipo de sensor de imagen:	CMOS
Micrófono incorporado:	Ja
Máximo 30 cuadros por segundo:	25 fps
El consumo de energía:	900 mA
Modo día/noche:	Ja
Control de cámara panorámica:	Nee
Función de inclinación de la cámara:	Nee
Número de sensores:	1
Alcance de visión nocturna:	40 m
Número de iluminación LED:	3
Compensación de retroiluminación:	Ja
Compensación destacada (HLC):	Ja
Consumo de energía (alimentación a través de Ethernet (PoE)):	10 W
Wifi.:	Nee
Amplio rango dinámico digital (DWDR):	Ja