Zagg ID7ZF2-BBF Manual de Usario

Zagg Teclado ID7ZF2-BBF

Lee a continuación 📖 el manual en español para Zagg ID7ZF2-BBF (24 páginas) en la categoría Teclado. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/24

Keyboard Instructions

Slim Book

*WARRANTY REGISTRATION

Your ZAGG® Slim Book comes with a one-year manufacturer’s warranty. In order to activate the

warranty, you must register your Slim Book as well as keep your purchase receipt. If you purchased

your ZAGG Slim Book from ZAGG.com, ZAGG® has already registered it and has a copy of your

proof of purchase.

NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT: www.ZAGG.com/faq

See the important Health and Safety information on page 7 before using this product.

INSERTING/REMOVING YOUR iPad®

To insert your iPad® into the Slim Book open the Book’s

case and remove it from the keyboard (to do this pull

the case up and away from the keyboard). Then, line

up your iPad with the holes in the case. Make sure the

camera hole is aligned properly as well as the opening

for the Lightning™ cable. When everything is aligned,

set the bottom half of your iPad in the cover and apply

light pressure to ensure it is properly settled. Snap the

top half of your iPad into the cover. Check all corners to

make sure they have seated properly.

When your iPad is secure in the case, you can connect it

with the keyboard by placing it in the magnetic trough.

Powerful magnets will secure it in place, but also allow

you to remove your iPad any time it beneﬁts you.

To easily remove your iPad from the case, separate the

case from the keyboard, and then gently roll the rubber

overmold away from the edges while pressing the tablet

from behind. Grasp your tablet’s exposed side and lift/

pull away from the Slim Book.

POWERING ON AND OFF

To turn your Slim Book on, press the Power button. A green

LED on the battery key will illuminate brieﬂy while the

keyboard powers up. To turn your Slim Book o,

press and hold the Power button for

three seconds. A red LED will ﬂash,

indicating your Slim Book has

turned o.

DISCONNECTING YOUR KEYBOARD

Your Slim Book features a case that protects your iPad even when it’s not

connected to your keyboard. When you’d like to use the case without the

keyboard, there are three ways you can disconnect your keyboard.

1. Press the Keyboard Hide/Show button.

Pressing this button will disengage the

Slim Book keyboard and allow you to use

your iPad’s on-screen keyboard. Press

the Keyboard Hide/Show button again

when you are ready to use the Slim Book’s

keyboard.

2. Turn o the Bluetooth connection from

your iPad.

3. Turn your Slim Book keyboard o.

PAIRING YOUR ZAGG Slim Book

Pairing your Slim Book with your iPad is easy. It should only need to be

paired once, using the following directions. If the connection between

your iPad and Slim Book is ever lost, repeat these steps.

1. On your iPad select: SETTINGS > BLUETOOTH > ON.

2. Press and hold the Bluetooth button for three seconds.

A blue LED under the Power key will ﬂash until your

Slim Book and iPad are paired.

3. Your iPad will display “ZAGG Slim Book”

as an available device. Select this option to

complete pairing.

Especificaciones del producto

Marca:	Zagg
Categoría:	Teclado
Modelo:	ID7ZF2-BBF
Color del producto:	Black, Red
Ancho:	98.5 mm
Profundidad:	33.7 mm
Altura:	25 mm
Amable:	Vast
Manual de usuario:	Ja
tipo-de-lámpara:	LED
Actual:	1 A
Colocación:	Buiten
factor vorm:	Rechthoekig
Cantidad por paquete:	1 stuk(s)
color del LED:	Rood
voltaje-de-entrada-de-CA:	10 - 30 V
Color del difusor:	Rood