Zagg IM2ZF2-BBG Manual de Usario

Zagg Teclado IM2ZF2-BBG

Lee a continuación 📖 el manual en español para Zagg IM2ZF2-BBG (24 páginas) en la categoría Teclado. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/24
Keyboard Instructions
Slim Book
*WARRANTY REGISTRATION
Your ZAGG® Slim Book comes with a one-year manufacturers warranty. In order to activate the
warranty, you must register your Slim Book as well as keep your purchase receipt. If you purchased
your ZAGG Slim Book from ZAGG.com, ZAGG® has already registered it and has a copy of your
proof of purchase.
NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT: www.ZAGG.com/faq
See the important Health and Safety information on page 7 before using this product.
INSERTING/REMOVING YOUR iPad®
To insert your iPad® into the Slim Book open the Book’s
case and remove it from the keyboard (to do this pull
the case up and away from the keyboard). Then, line
up your iPad with the holes in the case. Make sure the
camera hole is aligned properly as well as the opening
for the Lightning™ cable. When everything is aligned,
set the bottom half of your iPad in the cover and apply
light pressure to ensure it is properly settled. Snap the
top half of your iPad into the cover. Check all corners to
make sure they have seated properly.
When your iPad is secure in the case, you can connect it
with the keyboard by placing it in the magnetic trough.
Powerful magnets will secure it in place, but also allow
you to remove your iPad any time it benefits you.
To easily remove your iPad from the case, separate the
case from the keyboard, and then gently roll the rubber
overmold away from the edges while pressing the tablet
from behind. Grasp your tablet’s exposed side and lift/
pull away from the Slim Book.
1
POWERING ON AND OFF
To turn your Slim Book on, press the Power button. A green
LED on the battery key will illuminate briefly while the
keyboard powers up. To turn your Slim Book o,
press and hold the Power button for
three seconds. A red LED will flash,
indicating your Slim Book has
turned o.
DISCONNECTING YOUR KEYBOARD
Your Slim Book features a case that protects your iPad even when it’s not
connected to your keyboard. When you’d like to use the case without the
keyboard, there are three ways you can disconnect your keyboard.
1. Press the Keyboard Hide/Show button.
Pressing this button will disengage the
Slim Book keyboard and allow you to use
your iPad’s on-screen keyboard. Press
the Keyboard Hide/Show button again
when you are ready to use the Slim Book’s
keyboard.
2. Turn o the Bluetooth connection from
your iPad.
3. Turn your Slim Book keyboard o.
PAIRING YOUR ZAGG Slim Book
Pairing your Slim Book with your iPad is easy. It should only need to be
paired once, using the following directions. If the connection between
your iPad and Slim Book is ever lost, repeat these steps.
1. On your iPad select: SETTINGS > BLUETOOTH > ON.
2. Press and hold the Bluetooth button for three seconds.
A blue LED under the Power key will flash until your
Slim Book and iPad are paired.
3. Your iPad will display “ZAGG Slim Book”
as an available device. Select this option to
complete pairing.
2

Especificaciones del producto

Marca: Zagg
Categoría: Teclado
Modelo: IM2ZF2-BBG

¿Necesitas ayuda?

Si necesitas ayuda con Zagg IM2ZF2-BBG haz una pregunta a continuación y otros usuarios te responderán




Teclado Zagg Manuales

Teclado Manuales

Últimos Teclado Manuales