AFX Noah NOAV3208MBDG Manual de Usario

AFX Alivio Noah NOAV3208MBDG

Lee a continuación 📖 el manual en español para AFX Noah NOAV3208MBDG (1 páginas) en la categoría Alivio. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
E26 door Luminaires In
Wall Mount - Vanity
120VAC 60Hz/
Page 1 of 1 R0 8061541
Model #: NOAV2408MBDG
NOAV3208MBDG
Limited Factory Warranty
AFX Inc. hereby warrants that this xture is free from defects in materials and workmanship when installed and used under normal operating conditions for a period of 5 years
from date of purchase. This warranty covers all component parts and extends only to replacement of defective xture or components; it does not cover failure due to improper
installation, misuse, mishandling or damage incurred in transit.
View shown for reference
only. Individual models may
vary.
Safety Precautions
Read all safety precautions and installation instructions carefully before installing or servicing this xture. Failure to comply with these instructions could result in potentially fatal
electric shock and/or property damage.
It is recommended that a qualied electrician perform all wiring. This xture must be wired in accordance with all national and local electrical codes.
Do not handle any energized xture or attempt to energize any xture with wet hands or while standing on a wet or damp surface or in water.
This xture is designed for use in a 120VAC, 60Hz circuit. 50/
Make sure that the power source conforms to the requirements of the xture. (See labels on the xture housing).
To reduce the risk of electrical shock, and to assure proper operation, this xture must be adequately grounded. To accomplish proper grounding, there must be a separate ground
wire (green) contact between this xture and the ground connection of your main power supply panel.
This xture is intend neral indoor lighting in dry or damp locations. ed to be used for ge
Assembly Instructions
Step 1 Preparing for installation
A. at fuse or circuit breaker box before installing or Disconnect electrical power
servicing any part of this xture.
B. Carefully remove the xture from the carton, remove components from
hardware kit.
C. Remove mounting bracket (1) from the xture (3) by removing two side screws
(4).
D. Install mounting bracket (1) to the junction box (not included) using two screws
(2) to secure it.
Wiring All wiring must take place inside junction box (not included)
Caution: Make sure power is o at fuse or circuit breaker box. Check power
wires for damage or scrapes. Use wire suitable for at least 90°C (194°F).
Note: Most dwellings built before 1985 have supply wire rated to 60°C.
Consult a qualied electrician to ensure correct branch circuit conductor before
installing.
Step 2 Wiring xture
A. Make all wire connections to appropriate wire. Secure with wire nuts
(provided).
B. Connect the green wire from the xture to the supply power source ground
wire.
C. Connect the white wire from the xture to the white (N) wire from supply power
source.
D. Connect the black wire from the xture to the black (L) wire from supply power
sourc e.
E. ll on each wire lead to make sure connections are Do not mix wires. Pu
secure. Make certain no bare wires are exposed outside of wire connectors. Tuck all
connections neatly into the junction box.
Step 3 Mounting
A. Install xture by aligning both top and bottom holes the mounting bracket then using two screws (3) over (1)
(4) to secure it.
Step 4 Lamping (not included)
A. Install A19 (E26) base type lamp under 60W max rating into socket and twist clockwise rotation until securely
snug. Repeat until all three lamps are install ed.
Step 5 Restore power at fuse or circuit breaker box

Especificaciones del producto

Marca: AFX
Categoría: Alivio
Modelo: Noah NOAV3208MBDG

¿Necesitas ayuda?

Si necesitas ayuda con AFX Noah NOAV3208MBDG haz una pregunta a continuación y otros usuarios te responderán




Alivio AFX Manuales

Alivio Manuales

Últimos Alivio Manuales